• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.157-172
• /
• 2024

Autonomous driving technology, when commercialized, has the potential to improve the safety, mobility, and environmental performance of transportation networks. However, safe autonomous driving may be hindered by poor sensor performance and limitations in long-distance detection. Therefore, cooperative autonomous driving that can supplement information collected from surrounding vehicles and infrastructure is essential. In addition, since HDVs, AVs, and CAVs have different ranges of perceivable information and different response protocols, countermeasures are needed for mixed traffic that occur during the transition period of autonomous driving technology. There is a lack of research on traffic flow optimization that considers the penetration rate of autonomous vehicles and the different characteristics of each road segment. The objective of this study is to develop weights based on safety, operational, and environmental factors for each infrastructure control use case and autonomous vehicle MPR. To develop an integrated evaluation index, infra-guidance AHP and hybrid AHP weights were combined. Based on the results of this study, it can be used to give right of way to each vehicle to optimize mixed traffic.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.106-118
• /
• 2024

Interest in personal mobility has increased with the growing significance of first-mile and last-mile connectivity in smart mobility services. This study aims to propose a methodology for setting the service area of free-floating personal mobility sharing services and determining the optimal fleet size for the selected shared service area to address first-mile and last-mile challenges. We utilize population data, smart card data, and building data. Additionally, we estimate latent demand by incorporating age-specific and distance-specific utilization rates based on personal mobility device data. Along with the latent demand, we determine the service area based on locations of transit stops and buildings. We apply the proposed methodology to Yeongjong Island, Incheon. As a result, dense residential areas and popular beachside locations are designated as personal mobility sharing service areas. The fleet size for personal mobility in the dense residential service area is determined to be 1,022 units, while the fleet size for the beachside service area is set at 269 units.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.119-131
• /
• 2024

Understanding accurate traffic performance is crucial for ensuring efficient highway operation and providing a sustainable mobility environment. On the other hand, an immediate and precise estimation of highway traffic performance faces challenges because of infrastructure and technological constraints, data processing complexities, and limitations in using integrated big data. This paper introduces a framework for estimating traffic performance by analyzing real-time data sourced from toll collection systems and dedicated short-range communications used on highways. In particular, this study addresses the data errors arising from segmented information in data, influencing the individual travel trajectories of vehicles and establishing a more reliable Origin-Destination (OD) framework. The study revealed the necessity of trip linkage for accurate estimations when consecutive segments of individual vehicle travel within the OD occur within a 20-minute window. By linking these trip ODs, the daily average highway traffic performance for South Korea was estimated to be248,624 thousand vehicle kilometers per day. This value shows an increase of approximately 458 thousand vehicle kilometers per day compared to the 248,166 thousand vehicle kilometers per day reported in the highway operations manual. This outcome highlights the potential for supplementing previously omitted traffic performance data through the methodology proposed in this study.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.1-14
• /
• 2024

The most optimal route-search algorithm thus far has introduced a method of applying node labels and link labels. Node labels consider two nodes simultaneously in the optimal route-search process, while link labels consider two links simultaneously. This study proposes a turn-label-based optimal route-search technique that considers two turns simultaneously in the process. Turn-label-based optimal route search guarantees the optimal solution of dynamic programming based on Bellman's principle as it considers a two-turn search process. Turn-label-based optimal route search can accommodate the advantages of applying link labels because the concept of approaching the limit of link labels is applied equally. Therefore, it is possible to reflect rational cyclic traffic where nodes allow multiple visits without expanding the network, while links do not allow visits. In particular, it reflects the additional cost structure that appears in two consecutive turns, making it possible to express the structure of the travel-cost function more flexibly. A case study was conducted on the metropolitan urban railway network consisting of transportation card terminal readers, aiming to examine the scalability of the research by introducing parameters that reflect psychological resistance in travel with continuous pedestrian transfers into turn label optimal path search. Simulation results showed that it is possible to avoid conservative transfers even if the travel time and distance increase as the psychological resistance value for continuous turns increases, confirming the need to reflect the cost structure of turn labels. Nevertheless, further research is needed to secure diversity in the travel-cost functions of road and public-transportation networks.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.142-156
• /
• 2024

The transition to electric vehicles is a crucial step toward achieving carbon neutrality in the transportation sector. Adequate charging infrastructure at residential locations is essential. In South Korea, the predominant form of housing is multifamily dwellings, necessitating the provision of public charging stations for numerous residents. Although the government mandates the availability of charging facilities and designated parking areas for electric vehicles, it bases the supply of charging stations solely on the number of parking spaces. Slow chargers, mainly 3.5kW charging outlets and 7kW slow chargers, are commonly used. While the former is advantageous for installation and use, its slower charging speed necessitates the coexistence of both types of chargers. This study presents an optimization model that allocates chargers capable of meeting charging demands based on daily driving distances. Furthermore, using the metaheuristic algorithm Tabu Search, this model satisfies the optimization requirements and minimizes the costs associated with charger supply and usage. To conduct a case study, data from personal travel surveys were used to estimate the driving distances, and a hypothetical charging scenario and environment were set up to determine the optimal supply of 22 units of 3.5kW charging outlets for the charging demands of 100 BEVs.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.1
• /
• pp.21-30
• /
• 2024

In this paper, we propose a method to build a sample dataset of the features of eight sensor-only facilities built as infrastructure for autonomous cooperative driving. The feature extracted from point cloud data acquired by LiDAR and build them into the sample dataset for recognizing the facilities. In order to build the dataset, eight sensor-only facilities with high-brightness reflector sheets and a sensor acquisition system were developed. To extract the features of facilities located within a certain measurement distance from the acquired point cloud data, a cylindrical projection method was applied to the extracted points after applying DBSCAN method for points and then a modified OTSU method for reflected intensity. Coordinates of 3D points, projected coordinates of 2D, and reflection intensity were set as the features of the facility, and the dataset was built along with labels. In order to check the effectiveness of the facility dataset built based on LiDAR data, a common CNN model was selected and tested after training, showing an accuracy of about 90% or more, confirming the possibility of facility recognition. Through continuous experiments, we will improve the feature extraction algorithm for building the proposed dataset and improve its performance, and develop a dedicated model for recognizing sensor-only facilities for autonomous cooperative driving.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.49-62
• /
• 2024

Reckless development of the underground by rapid urbanization causes inspection delay on replacement of existing structure and installation new facilities. However, frequent accidents occur due to deviation in construction design planned by inaccurate location information of underground structure. Meanwhile, the electrical resistivity survey, knowns as non-destructive method, is based on the difference in the electric potential of electrodes to measure the electrical resistance of ground. This method is significantly advanced with multi-electrode and deep learning for analyzing strata. However, there is no study to quantitatively assess change in electrical resistance according to geometric conditions of structures. This study evaluates changes in electrical resistance through geometric parameters of electrodes and structure. Firstly, electrical resistance numerical module is developed using generalized mesh occurring minimal errors between theoretical and numerical resistance values. Then, changes in resistances are quantitatively compared on geometric parameters including burial depth, diameter of structure, and distance electrode and structure under steady current condition. The results show that higher electrical resistance is measured for shallow depth, larger size, and proximity to the electrode. Additionally, electric potential and current density distributions are analyzed to discuss the measured electrical resistance around the terminal electrode and structure.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.50 no.1
• /
• pp.27-34
• /
• 2024

Objectives: Surgical intervention for removal of an impacted third molar can lead to significant pain and swelling. Corticosteroids show promise for mitigating postoperative sequelae across various surgical contexts. The use of corticosteroids following minor oral surgery, though controversial, has already been proven effective. However, little research has explored peroral prescription of corticosteroids despite its convenience for outpatients and for non-surgeons like implantologists and periodontists and others who don't have access to needle injections. The aim of this study was to address a void in the literature by comparing the effects of two styles of preoral administration of prednisolone after surgical removal of the mandibular third molar and to determine which style minimizes postoperative sequelae. Materials and Methods: A randomized, split-mouth clinical study was conducted to investigate the efficacy of two different styles of preoral prednisolone in mitigating postoperative sequelae following surgical extraction of impacted mandibular third molars. Fifteen participants were enrolled in the study. Random selection was used to determine the prescription style for the right and left mandibular arch. Group A included those who received a single dose of prednisolone 25 mg, while group B received prednisolone 5 mg postoperatively for a period of three days (5 mg three times/day on the first postoperative day, 5 mg twice/day on the second postoperative day; 5 mg once/day on the third postoperative day). Results: There was a significant difference in the distance between the corner of the mouth and tragus, which decreased with the time interval with respect to group B when compared to group A. Conclusion: The present study showed that a three-day tapered dose of prednisolone postoperatively was more effective in reducing post-extraction sequelae than a single-dose regimen.

• Land and Housing Review
• /
• v.15 no.1
• /
• pp.117-134
• /
• 2024

This study examines the factors contributing to waterfront satisfaction among different generations, utilizing a survey on the use and perception of waterfront areas by residents of apartment houses in Tokyo's coastal region. The variables used in this study are developed through a review of existing literature, focusing on factors related to waterfront usage. Specifically, we select the proximity to the waterfront, duration of stay at the waterfront, and frequency of visits to the waterfront as key variables for investigation. In addition, the study further incorporates aspects related to waterfront recognition, such as the space, user behavior, and management status of the waterfront. Utilizing these variables, we carry out a correlation analysis to investigate the association between generational use and perception of the waterfront and their satisfaction with water-related experiences. The results identify three key factors to enhance waterfront satisfaction: First, to increase visits from both younger and older generations, improving pedestrian access to the waterfront is essential. Second, for middle-aged and older generations, creating waterfront areas closer to their residences can reduce travel distance and time, encouraging more frequent use. Third, maintaining clean and well-kept waterfront spaces is fundamental for all generations to enjoy relaxing experiences, thereby improving overall satisfaction.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.1
• /
• pp.15-28
• /
• 2024

This paper proposes a method to acquire image data inside tunnel structures and a method to structure the acquired image data. By improving the conditions by which image data are acquired inside the tunnel structure, high-quality image data can be obtained from area type tunnel scanning. To improve the data acquisition conditions, a longitudinal rail of the tunnel can be installed on the tunnel ceiling, and image data of the entire tunnel structure can be acquired by moving the installed rail. This study identified 0.5 mm cracked simulation lines under a distance condition of 20 m at resolutions of 3,840 × 2,160 and 720 × 480 pixels. In addition, the proposed image-data-structuring method could acquire image data in image tile units. Here, the image data of the tunnel can be structured by substituting the application factors (resolution of the acquired image and the tunnel size) into a relationship equation. In an experiment, the image data of a tunnel with a length of 1,000 m and a width of 20 m were obtained with a minimum overlap rate of 0.02% to 8.36% depending on resolution and precision, and the size of the local coordinate system was found to be (14 × 15) to (36 × 34) pixels.