• Journal of the korean academy of Pediatric Dentistry
• /
• 제35권2호
• /
• pp.268-277
• /
• 2008

Authors evaluated 1171 patients at the department of Pediatric Dentistry in Kyoungpook National University Hospital through clinical records and radiographs. And the following features were studied ; age, sex distribution, number of mesiodens per patients, cause of discovery of mesiodens, location, status of eruption, shape and orientation of crown, complication, dental age of adjacent upper incisor tooth at the time of surgical extraction of mesiodens and the relationship between the resolution rate of complication after extraction of mesiodens and the dental age of adjacent upper incisor tooth, length of diastema, the eruption status of lateral incisor and the crowding status of premaxilla. The followings are the results : 1. The cause of discovery of mesiodens were as follows ; delayed eruption of the permanent incisors in 13.8%, midline diastema in 11.6%, radiographs taken for other reasons in 23.4% and for caries treatment in 15.1%. 2. Complication due to the presence of mesiodens did not occur in 36.8%, delayed eruption of adjacent teeth was observed in 16.1%, midline diastema in 34.4%, rotation in 8.8%, displacement in 2.4%, and crowding in 1.0% of all evaluated patients. 3. As for the dental age of adjacent upper incisor tooth at the time of surgical extraction of mesiodens, below 1/3 of total root length were observed in 3.5%, $1/3{\sim}1/2$ of total root length in 19.9%, $1/2{\sim}2/3$ of total root length in 54.7% and over 2/3 in 21.9% of all evaluated patients. 4. Resolution rate of delayed eruption after the extraction of mesiodens was significant higher in the group with the root length below 1/2. Resolution rate of midline diastema was significant higher in the group with diastema width below 3mm and with non-crowding of adjacent upper incisor teeth.

• Journal of Korean Tunnelling and Underground Space Association
• /
• 제20권5호
• /
• pp.855-867
• /
• 2018

When a weak zone exists ahead of tunnel face, the stress in the adjacent area would increase due to the longitudinal arching effect and the stability of the tunnel is affected. Therefore, it is critical to prepare a countermeasure through the investigation of the frontal weakness zone of the excavated face. Although there are several researches to predict the existence of weak zone ahead of tunnel face, such as geophysical exploration, numerical analysis and tunnel support, lack of studies on the relaxation zone depending on the width or distance from the vulnerable area. In this study, the impact of the weak zone on the formation of the relaxation zone was investigated. For this purpose, a series of laboratory test were carried out varying the width of the weak zone and the separation distance between tunnel face and weak zone. In the model test, sand with a water content of 3.8% was used to form a model ground. The model weak zone was constructed with dry sand curtains. The tunnel face was adjusted to allow a sequential excavation of upper and lower half part. load cells were installed on the bottom of the foundation and the tunnel face and measuring instruments for displacement were installed on the surface of the model ground to measure the vertical stress and surface displacements due to tunnel excavation respectively. The test results show that the width of weak zone did not affect the ground settlement while the ground subsidence drastically increased within 0.25D. The vertical stress and horizontal stress increased from 0.5D or less. In addition, the longitudinal arching effect is likely within the 1.0D zone ahead of the tunnel face, which may reduce the vertical stress in the ground following tunneling direction.

• Journal of the Korean Arthroscopy Society
• /
• 제16권2호
• /
• pp.107-113
• /
• 2012

Purpose: The purpose of this study was to evaluate the posterior cruciate ligament (PCL) reconstruction with single bundle, single-incision technique using Achilles tendon and tibialis anterior allograft with ligament remnant preservation. Materials and Methods: Twenty six patients underwent PCL reconstruction was included. There were 21 males and 5 females. Mean age was 32 years. Used graft was a fresh frozen Achilles tendon allograft (group I, 14 cases) and tibialis anterior allograft (group II, 12 cases). Arthroscopic PCL reconstruction was performed using transtibial, single-incision and single bundle technique with remnant preserving as possible. For clinical evaluation, range of motion, posterior drawer test, Lysholm score, Tegner activity scale, International Knee Documentation Committee (IKDC) grade and posterior stress radiograph were used. The mean follow-up period was 21.6 months (12-40 months). Associated injuries were 5 medial collateral ligament injuries, which were treated by conservative method. Results: Range of motion (ROM) was returned to normal range in 24 cases, but ROM deficit under $10^{\circ}$ flexion was 2 cases at final follow-up period. Preoperative posterior drawer test was 17 cases in grade II and 9 cases in grade III. At final follow-up 13 cases returned within normal grade, 7 cases grade I and 6 cases grade II posterior instability. Lysholm mean score was improved from preoperatively 62 to 90 at final follow-up period. Tegner activity mean scale improved from preoperatively 3.5 to 5.6 at final follow-up period. IDKC grade was grade A was 3 cases, grade B 17 cases, grade C 6 cases. In posterior stress radiograph, posterior displacement was improved from mean 12 mm preoperative to 4.5 mm at final follow-up. There were no statistical differences between two groups in clinical evaluations. There were two cases of re-rupture of graft at the bone-tendon junction in group I. Conclusion: We had successful results of PCL reconstruction with single-incision, single bundle technique using Achilles and tibialis anterior allograft without difference between two groups in patients with PCL injury. There were more re-rupture of graft in Achilles tendon group.

• Journal of the Korean Arthroscopy Society
• /
• 제13권1호
• /
• pp.8-13
• /
• 2009

Purpose: We used tibialis allograft for the reconstruction of ACL and used Hybrid femoral fixation utilizing $Endobutton^{(R)}$ and $Rigidfix^{(R)}$ for femoral fixation, and used $Retroscrew^{(R)}$ and additional fixation for tibial fixation to evaluate the clinical results. Materials and Methods: The ACL reconstruction were performed from February 2004 to February 2007 utilizing Hybrid femoral fixation and $Retroscrew^{(R)}$ and 32 patients, 32 cases which were available for year-long observation (12 to 25 months). The clinical results (Lysholm knee score, IKDC grade) and the radiologic results(bone tunnel expansion, Telos anterior displacement test) were evaluated. Results: The Lysholm knee score was improved from the average of $67.9{\pm}5.4$ points (range: 51~77) before operation and to $94.1{\pm}6.8$ points (range: 68~98) at the last follow up (p<0.05). 22 cases (69%) were evaluated normal (A), 9 cases (28%) were evaluated nearly normal (B) and only 1 case (3%) was evaluated not normal (C) at IKDC final evaluation and no case was evaluated abnormal. From $Telos^{(R)}$ stress x-ray evaluation, difference from the opposite knee was improved average 13.2 mm{\pm}5.8 (range: 6~21 mm) to average $3.4\;mm{\pm}2.8$ (range: 0~11 mm) after operation (p<0.05). The femoral and tibial tunnel were widened by 18.7% and 9.6% in the AP view and 12.4% and 8.5% in the lateral view, respectively (p<0.05). However, any statistic significance was not observed between bone tunnel expansion and knee joint functions (p>0.05). Conclusion: An ACL reconstruction with tibialis allograft using Hybrid femoral fixation and $Retroscrew^{(R)}$ enabled anatomical fixation of the graft tendon with satisfactory clinical results.

• The korean journal of orthodontics
• /
• 제26권1호
• /
• pp.17-32
• /
• 1996

It is important to understand the operating mechanism and force system of fixed appliance that most effective for individual tooth movement in various orthodontic appliances. The archwire system of fixed appliance is devided into 3 types, which is continuous arch, segmented arch and sectional arch. The last two types have longer interbracket distance and simple force operating points, so it is easy to control force system by operator. But the continuous arch has shorter interbracket distance and various bracket geometry, so it is hard to control and anaylze the force system. The purpose of this study was three dimentional force and moment analysis of continuous arch system by finite element method, which is similar situation to three dimentional elastic beam in structural engineering. Several sample form of various bracket geometry and artificial lower crowding typodont made by author were constructed, analyzed and compared each other. The results were as follows : 1. The force magnitude is linear proportional to the degree of displacement or tilting of the bracket. 2. The force magnitude is inversely non-linear proportional to the interbracket distance. 3. In three dimensional typodont model, while the force can be compared with that of the sample form in the area where adjacent bracket geometry is simple, the force is much more than the expected value in the area where adjacent bracket geometry is complex.

• The korean journal of orthodontics
• /
• 제26권3호
• /
• pp.255-265
• /
• 1996

The purpose of this study was to investigate if there were a significant difference between cephalometric measurements of mandibular position derived from a centric occlusion tracing compared to those of a converted centric relation tracing in the Class III malocclusion. The sample consisted of 25 Class III malocclusion and 25 normal occlusion persons who had no orthodontic treatment. The records included an lateral cephalometrics in centric occlusion, centric relation and centric occlusion bite registration and diagnostic casts mounted on the SAM II articulator in CR. The amount of CR-CO discrepancy of condyle was recorded using a MPI(Mandibular Position Indicator, MPI $200^{(R)}$, Great Lakes Orthodontics, USA). The conversion of the CO cephalogram to CR using the MPI readings was performed on the Conversion work sheet. Measures of mandibular position were chosen for the purpose of this study. The comparison of the difference between CO and CR cephalometric measurements in the normal occlusion and Class III malocclusion group were studied. The results were as follows: 1. In the features of CR-CO discrepancy of the condyle, the condyle was displaced posterior and inferior when the teeth were in centric occlusion. The horizontal component(${\Delta}X$) in Class HI malocclusion group was greater than the vertical component(${\Delta}Z$) and also greater than the horizontal component(${\Delta}X$) in normal occlusion group. There was no statistically significant correlation between MPI measurements and the groups of normal occlusion and Class III malocclusion group. 2. In the comparison of the cephalometric measurements in each group, Normal occlusion group showed significant difference in measurements such as ANB, Facial angle, Facial convexity and ODI. Class HI malocclusion group showed significant difference in measurements such as ANB, Facial angle, Facial convexity, ODI, SNB, APDI, L1-FP and it had more significance than the normal occlusion group. 3. The Value of cephalometric measurements was significantly different between CO and CR but there were no differences between the groups of normal occlusion and Class III malocclusion. The results of this study suggest that if the discrepancies are greater than the amount of normal displacement from clinically captured centric relation, centric relation should be considered as the starting point for proper diagnosis and treatment planning.

• Clinical and Experimental Pediatrics
• /
• 제50권4호
• /
• pp.363-368
• /
• 2007

Purpose : It has been reported that deep neck abscesses are recently increasing again. We analyzed pediatric cases with deep neck abscesses during the last several years to contribute to the treatment of the disease. Methods : The clinical data of 30 children under 16 years of age with deep neck abscess from February 2001 to July 2006 were analysed retrospectively. Results : The mean age was 9 years (2-16 years), and the male/female ratio was 19/11. Abscesses in the peritonsillar space were most common (57%), followed by the retropharyngeal (30%) and parapharyngeal (13%) spaces. Upper respiratory infection in 10 cases (33%), dental infection in four case (14%), cervical lymphadenitis in three case (10%) and sinusitis in two case (6%) contributed to the development of deep neck infections. The frequent symptoms were fever in 16 case (53%), sore throat in 15 case (50%), poor oral intake in 10 (33%), odynophagia in eight (27%), and neck pain in eight (27%). Unilateral tonsillar hypertrophy and displacement in 15 case (50%) were most common. Neck mass in 13 patients (43%), neck stiffness in three (10%) and trismus in three (10%) were also found. Bacteria were isolated in 8 among 10 pus cultures; Streptococcus species 7 and Micrococcus luteus 1. All of those bacteria except Micrococcus luteus were sensitive to penicillin G. Surgical intervention was applied to 12 cases (40%), and the remaining 18 patients (60%) were treated with antibiotics only. There were no differences between the two groups in the duration of admission and antibiotic treatment. No complicated cases were observed. Conclusion : Peritonsillar abscesses were most frequent. Upper respiratory infection was the most common predisposing factor, followed by dental infection and sinusitis. Symptoms of respiratory tract obstruction were not found. The most common pathogens were Streptococcus species. Deep neck abscesses in children, if diagnosed at the early stage, possibly can be treated by antibiotics only, without surgical intervention.

• Journal of Korean Orthopaedic Sports Medicine
• /
• 제6권1호
• /
• pp.38-44
• /
• 2007

Purpose: To evaluate status of reconstructed ACL and changes around graft through second-look arthroscopy after arthroscopic reconstruction of the ACL with autograft tendons. Material and Methods: Between Jun. 2003 and Feb. 2007, the second look arthroscopy was performed on 22 cases. Second-look arthroscopy was conducted on average 15.1 $(7\sim31)$ months after reconstruction. 15 cases received hamstring tendon autograft, 7 cases received bone-patellar tendonbone autograft. We measured graft tension using displacement by probing, synovial coverage by visual analysis at second-look arthroscopy The assay in Lysholm score, Lachmann test and KT-2000 arthrometer were evaluated status of reconstructed ACL. Results: The hamstring tendon group showed normal tension in 11 cases and lax tension in 4 cases. The patellar tendon group showed normal tension in 3 cases, lax tension in 2 cases and partial tear in 2 cases. In the hamstring tendon group, synovial coverage was good in 11 cases, half in 3 cases and pale in 1 case, and the bone-patellar tendon-bone group was good in 4 cases and half in 3 cases. The patellar tendon group was superior to the hamstring tendon group in Lysholm score (p<0.05), but insignificance difference in KT-2000 arthrometer results statistically. Conclusion: The hamstring tendon group was superior to the bone-patellar tendon-bone group in second-look arthroscopy after ACL reconstruction with autograft tendons results, but long term follow up will be necessary to further evaluated.

• Tunnel and Underground Space
• /
• 제21권6호
• /
• pp.471-479
• /
• 2011

The velocity horizontal response spectra using the observed ground motions from the recent 5 macro earthquakes, equal to or larger than 4.8 in magnitude, around Korean Peninsula were analysed and then were compared to the acceleration horizontal response spectra, seismic design response spectra (Reg Guide 1.60), applied to the domestic nuclear power plants, and finally the Korean Standard Design Response Spectrum for general structures and buildings. 102 velocity horizontal ground motions, including NS and EW components, were used for velocity horizontal response spectra and then normalized with respect to the peak velocity value of each ground motion. First, the results showed that velocity horizontal response spectra have larger values at the range of medium natural period, but acceleration horizontal response spectra have larger values at the range of short natural periods. Secondly, the results also showed that velocity horizontal response spectra exceed Reg. Guide 1.60 for longer natural periods bands less than 6-7 Hz. Finally, the results were also compared to the Korean Standard Response Spectrum for the 3 different soil types(SC, SD, and SE soil type) and showed that velocity horizontal response spectra revealed much higher values for the frequency bands below 1.5(SC), 2.0(SD), and 3.0(SE) seconds, respectively, than the Korean Standard Response Spectrum. The results suggest that the fact that acceleration, velocity, and displacement horizontal response spectra have larger values at the range of short, medium, and long natural periods, respectively, can be applied consistently to those form domestic ground motion, especially, the velocity ground motion. Information on response spectrum at such medium range periods can be very important since the domestic design of buildings and structures emphasizes recently medium and long natural periods than short one due to increased super high-rise buildings.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제33권3호
• /
• pp.159-165
• /
• 1997

This paper presents the optimum dimension of 89 ton class stow-net vessel with stern-fishing. The model of basic design is developed by using the optimization techniques referring to objective function and numerous constraints as follows; speed, fishing quantity, fishing days, catch per unit effort(CPUE), and weight/ratio of main dimensions, etc. Thus, the basic design of stow-net fishing vessel is built up by using the optimization of the design variables called the economic optimization criteria, and the objective function represents the criterion which is cost benefit ratio(CBR). The main conclusions are as follows. 1. S/W for decision of optimum hull size is developed in 89 ton class stow-net fishing vessel which is constructed with optimization of the design variables called the economic optimization criteria. 2. For optimum ship dimensions in 89 ton class stow-net fishing vessel, the hull dimensions can be obtained in the range of L= 27.3m, B = 6.6m, D = 2.80m, Cb = 0.695, T/D = 0.80, $\Delta$(displacement)=281.7ton with 10 knots.