• 한국대기환경학회지
• /
• 제13권5호
• /
• pp.383-396
• /
• 1997

Numerical prediction of the pollutant dispersion over a two-dimensional hilly terrain is presented. The dispersion model used in the present work is based on the gradient diffusion theory and the finite-volume method on a non-orthogonal boundary-fitted grid system. The numerical model is validated by comparing the results with the available experimental data for the flat-floor dispersion within a turbulent boundary-layer. The numerical error analysis is performed based on the guideline of Kasibhatla et al.(1988) for the elevated-source dispersion in the flat-floor boundary layer having a power-law velocity and linear eddy-diffusivity profile. The influences of the two-dimensional hilly terrain on the dispersion from a continuously released source are numerically investigated by changing the emission locations and heights. It is found that the distributions of ground-level concentration are strongly influenced by the source location and the emission height. Hence, the terrain amplification factor is greatly enhanced when the pollutant source is located within a flow separation region. Dispersion from a source of short duration is also simulated and the duration time of the pollutant is compared at several downstream locations on a hilly terrain. The results of the numerical prediction are applied to the evaluation of environmental impacts due to the automobile exhausts at the seashore highway with a parallel mountain range.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.339-346
• /
• 2014

To give a positive effect on dispersion behavior of high performance fibers $Vectran^{(R)}$ in water with reference to wet-laid nonwoven technology, 9 kinds of sulfonate type anionic surfactants were chosen to study. After dispersion experiment, the number and the area occupied by fibers in each sample were counted and figured to calculate the index of dispersion in conjunction with quadrat analysis. Similar tendency was observed in the results of two experiments. The sample without addition of any surfactant resulted in the most aggregated dispersion behavior. As the length of alkyl group attached to sulfonate increases, the sample shows more dispersed behavior. The sample with the surfactant having the aryl group and the longer alkyl group shows the most dispersed behavior and it can be seen with the naked eye as well.

• Mass Spectrometry Letters
• /
• 제7권3호
• /
• pp.79-83
• /
• 2016

We prepared solid dispersion formulations of quercetin to enhance its solubility and dissolution rate. Various quercetin-loaded solid dispersion were tested with quercetin, poloxamer 407, and carrier such as hydroxypropyl methyl cellulose (HPMC), polyethylene glycol 8000 (PEG 8000), and polyvinylpyrrolidone K40 (PVP K40) using solvent evaporation and freeze drying methods in terms of both the aqueous solubility and the dissolution rates of quercetin. The solubility of quercetin as its solid dispersion formulations was markedly improved compared with that of quercetin powder. Especially, highest solubility of quercetin was observed when HPMC was used as a carrier. The cumulative dissolution of quercetin within 360 min from solid dispersion composed of quercetin, poloxamer 407, and HPMC was 8.8-fold higher than the dissolution of pure quercetin. The results of powder X-ray diffraction (XRD) and scanning electron microscope (SEM) indicated that quercetin transformed from a crystalline to an amorphous form through the solid dispersion formulation process. These results suggest that the solid dispersion formulation of quercetin with poloxamer 407 and HPMC could be a promising option for enhancing the solubility and dissolution rate of quercetin.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.324-331
• /
• 2014

The dispersion characteristics of AlN-4.5 wt% $Y_2O_3$ powder mixture by various dispersants were investigated in ethanol and methyethly-ketone (MEK) solvents. In general, the cationic polymer dispersants demonstrated superior dispersion of the powder as compared to the non-ionic ester-type dispersants or anionic phosphate-ester-based ones. The dispersion performance of the cationic polymer dispersants was sensitive to the type of solvent. An anhydric maleic-acid-based graft copolymer dispersant, AFB-1521, demonstrated a very good dispersion capability in ethanol but exhibited a much inferior dispersion in MEK. On the other hand, the dispersion of the powder mixture was very good with a phosphate-ester-based block polymer dispersant, BYK-111, in MEK solvent, while dispersionwas much degraded in ethanol.

• 한국분말재료학회지
• /
• 제25권5호
• /
• pp.395-401
• /
• 2018

The improvement of dispersion stability for the primary polishing slurry in a CMP process is achieved to prevent defects produced by agglomeration of the slurry. The dispersion properties are analyzed according to the physical characteristics of each silica sol sample. Further, the difference in the dispersion stability is confirmed as the surfactant content. The dispersibility results measured by Zeta potential suggest that the dispersion properties depend on the content and size of the abrasive in the primary polishing slurry. Moreover, the optimum ratio for high dispersion stability is confirmed as the addition content of the surfactant. Based on the aforementioned results, the long-term stability of each slurry is analyzed. Turbiscan analysis demonstrates that the agglomeration occurs depending on the increasing amount of surfactant. As a result, we demonstrate that the increased particle size and the decreased content of silica improve the dispersion stability and long-term stability.

• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.32-37
• /
• 2011

In dispersion management (DM) and optical phase conjugation applied into optical transmission links with multi fiber spans for minimizing the impact of nonlinearity and group velocity (GVD), implementation possibility of DM using only one fiber span for pre- or postcompensation was assessed as a function of duty cycle of RZ pulse and residual dispersion per span (RDPS). It is confirmed that DM with optimal net residual dispersion (NRD) controlled by only one fiber span could be sufficiently applied into optical transmission links, though optimal NRD is more increased than that in transmission links with the general DM scheme of pre- and postcompensation. Thus, it is expected that optical transmission system is simply designed and implemented by applying the proposed DM scheme into real optical transmission links. Also, it is confirmed that the advantageous duty cycle of RZ is 0.5 and RDPS is setting to be small value for the effective transmitting wide signal wavelength range in optical links with optimal NRD controlled by only one fiber span.

• 한국해안해양공학회지
• /
• 제15권2호
• /
• pp.108-115
• /
• 2003

천수방정식에 기초한 ADCIRC 유한요소모형을 이용하여 지진해일 전파를 수치모의할 때 분산효과를 고려하기 위한 두 가지 일차원 분산보정기법을 개발하였다. 첫 번째 방법은 음해법으로, 각 시간단계의 공간미분항에 부여되는 가중치를 조정함으로써 분산보정을 수행한다. 두 번째는 양해법으로, 유한요소의 크기를 조정하여 분산을 고려한다. 새로운 기법을 이용하여 계산한 수치해와 파의 분산효과를 고려한 해석해의 비교를 통해 본 연구에서 제안한 분산보정기법의 타당성을 확인하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.342-349
• /
• 2009

The purpose of this study is to estimate efficiently an odor dispersion from waste treatment facility for a crematory and a neighborhood facility, then propose planning, a location of an opening or the arrangement of the trees. Hence, offer a comfortable environment for a resident. For this, first the research data about estimating odor dispersion from waste treatment facility and odor are analyzed, then research an ingredient, characteristic, a direct effect for human and a method of measurement. Second, with on-site survey, check odorimetry and the source of odor dispersion, then apply this to the boundary condition of CFD simulation. Third, analyse by the hour for the 2008 standard weather data of Cheon-an, then apply summer data that odor dispersion is active, winter data relatively slow and an annual mean velocity and wind to the simulation. Even if a crematory and neighborhood facility located on south and north from waste treatment facility are at the low rate, the south and north wind will be applied to the simulation. Fourth, with CFD simulation result, predict an odor dispersion, then propose a solution which is considered an odor dispersion, a location of an opening and the arrangement of the trees. Consequently, this study will have an effect on an environment of a resident.

• Journal of information and communication convergence engineering
• /
• 제11권1호
• /
• pp.1-6
• /
• 2013

Suppressing or mitigating signal distortion due to group velocity dispersion and optical Kerr effects is necessary in ultra-high speed and long-haul wavelength division multiplexing (WDM) transmission systems. Dispersion management (DM), optical phase conjugation (OPC), and the combination of these two are promising techniques to compensate for signal distortion. In this paper, to implement a flexible optical WDM network, a new optical link configuration with a randomly distributed single-mode fiber (SMF) length and fixed residual dispersion per span in the combination of DM and OPC is proposed and investigated. The simulation results show that the best net residual dispersion (NRD) in the proposed optical links is +10 ps/nm, which is independent of pre- and postcompensation. The effective launch power of the WDM channel is increased more in the optical links with NRD = +10 ps/nm controlled by only precompensation. Furthermore, the system performance difference between the proposed optical link configuration with the best NRD and the conventional optical link with uniform distribution of the SMF length had little significance. Consequently, it is confirmed that the proposed optical link configuration with the best NRD is effective and useful for implementing a reconfigurable long-haul WDM network.

• 한국시뮬레이션학회논문지
• /
• 제28권3호
• /
• pp.83-89
• /
• 2019

본 연구는 회전 비행체(Magnus rotor)를 탑재한 분산탄두의 분산 균일도에 미치는 요인 분석과 성능지표를 도출하기 위해 모탄의 속도 V와 회전속도 ${\omega}$, 비행경로각(flight path angle) ${\gamma}$ 그리고 고도 h의 변화에 따른 해석 결과를 기술했으며, 이때 모탄의 회전속도와 속도의 비를 새로운 변수로 정의했다. 자탄의 분산 해석에는 풍동실험을 통해 획득한 공력계수를 사용한 6 자유도 운동방정식을 이용했으며, 분산도 분석을 위해 회귀분석과 결정계수를 구해 분산도를 평가했다. 해석결과 최적의 회전속도와 낙하속도의 비, 비행경로각(flight path angle)을 구할 수 있었으며, 방출고도는 분산도에 회전속도와 낙하속도의 비, 비행경로각(flight path angle)의 영향에 비해 영향은 크지 않고, 자탄의 분산반경에 영향이 큰 것을 확인했다.