• 복식
• /
• 제32권
• /
• pp.243-259
• /
• 1997

The object of this research is to inform readers of the chronikal change of Military Uniform in wars how the features and colors of uniforms have been changed along with the innovations of firearms. Military uniforms can be put into two differ-ent categories which are 'Battle wear' and 'Rank wear' A battle wear features of protec-tion and user fiendliness, These features of a battle wear can possibly minimize injuries and help increase the level of battling perform-ance. On the other hand a rank wear help dis-tinguish soldiers from their ranks and posi-tions. A rank wear symbolizs the pride that soldiers take n their unit and by wearing a rank wear soldiers feel more attached to their collegues and unit. Concrete process of military uniforms is as follows. 1. As firearms were innovated corres-pondant innovation of military uniforms were also needed this innovation were in the formstructure design color etc. 2. In the beginning features of military uniforms changed toward protection and then after social status of solders rised features changed forward show-off Finally as firearms became more fortal camouflage became the most significant feature of the military uniforms. 3. During war colors of military uniforms tended to be a means of show -off and camou- flage and while not in war they functioned as symbol which represent froops and the unit is tradition. 4. Other accessaries support the perforance and the symbolical function of uniforms.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.985-993
• /
• 2006

An experiment to find out the removal mechanism of PEG(polyethyleneglycol) by using UV-enhanced $O_2$ GPC (gas phase cleaning) at low substrate temperature below $200^{\circ}C$ was executed under various process conditions, such as substrate temperature, UV exposure, and $O_2$ gas. The possibility of using $UV/O_2$ GPC as a low-temperature in-situ cleaning tool for organic removal was confirmed by the removal of a PEG film with a thickness of about 200 nm within 150 sec at a substrate temperature of $200^{\circ}C$. Synergistic effects by combining photo-dissociation and photo oxidation can only remove the entire PEG film without residues within experimental splits. In $UV/O_2$ GPC with substrate temperatures higher than the glass transition temperature, the substantial increase in the PEG removal rate can be explained by surface-wave formation. The photo-dissociation of PEG film by UV exposure results in the formation of end aldehyde by dissociation of back-bone chain and direct decomposition of light molecules. The role of oxygen is forming peroxide radicals and/or terminating the dis-proportionation reaction by forming peroxide.

• 한국컴퓨터정보학회논문지
• /
• 제6권3호
• /
• pp.11-16
• /
• 2001

본 논문은 PC를 이용한 멀티 채널의 입력 시스템의 구현 방안으로서 멀티 채널의 각 입력 채널의 입력 신호를 저장하고, 기록을 목적으로 한 시스템을 제안하며 시스템 구현을 위한 요구 사항을 검토한다. 그리고 3차원 디스플레이를 위하여 4채널로부터 동시에 입력되는 영상 신호를 4배의 빠른 속도로 순차적으로 디스플레이 하는 시스템을 구현한다. 영상의 데이터 입력 장치인 4대의 카메라, 입력을 모니터 하는 입력 모니터, 동시에 입력되는 영상 신호를 4배의 빠른 속도를 처리하는 장치, 120f㎰를 디스플레이 할 수 있는 모니터로 구성된다. 이러한 전체 시스템의 요구 사항과 시스템의 Specifications을 정리한다. 고속 처리 장치에 대한 회로도는 회로 시뮬레이션 프로그램인 PSpice를 이용하여 시뮬레이션으로 회로도를 검증하였다.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.441-448
• /
• 2002

Dispersions of non-soluble ceramic particles in a metallic matrix can enhance the strength and heat resistance of materials. With the advent of mechanical alloying it became possible to put the theoretical concept into practice by incorporating very fine particles in a flirty uniform distribution into often oxidation- and corrosion- resistant metal matrices. e.g. superalloys. The present paper will give an overview about the mechanical alloying technique as a dry, high energy ball milling process for producing composite metal powders with a fine controlled microstructure. The common way is milling of a mixture of metallic and nonmetallic powders (e.g. oxides. carbides, nitrides, borides) in a high energy ball mill. The heavy mechanical deformation during milling causes also fracture of the ceramic particles to be distributed homogeneously by further milling. The mechanisms of the process are described. To obtain a homogeneous distribution of nano-sized dispersoids in a more ductile matrix (e.g. aluminium-or copper based alloys) a reaction milling is suitable. Dispersoid can be formed in a solid state reaction by introducing materials that react with the matrix either during milling or during a subsequent heat treatment. The pre-conditions for obtaining high quality materials, which require a homogeneous distribution of small dis-persoids, are: milling behaviour of the ductile phase (Al, Cu) will be improved by the additives (e.g. graphite), homogeneous introduction of the additives into the granules is possible and the additive reacts with the matrix or an alloying element to form hard particles that are inert with respect to the matrix also at elevated temperatures. The mechanism of the in-situ formation of dispersoids is described using copper-based alloys as an example. A comparison between the in-situ formation of dispersoids (TiC) in the copper matrix and the milling of Cu-TiC mixtures is given with respect to the microstructure and properties, obtained.

• 비교문화연구
• /
• 제36권
• /
• pp.123-147
• /
• 2014

The purpose of this essay is three-fold: to trace the genealogy of the Korean musical, which ever since its inception in the 1960s has been seeking to modernize Korean theater with Broadway as a constant role model; to investigate how the national and the global conflict and are conflated in the form of the Korean musical in the process of its (dis)identification with Broadway; and to examine how its intercultural translations reveal and reflect the dilemma and ambivalence posed by globalization in our era. Drawing on Richard Dyer's signature article Entertainment and Utopia, I analyze how the Korean musical manifests and conduits competing utopian impulses of Korean/Global audiences. I also attempt to problematize the formulaic notion of Broadway musicalsthe Superior Other!which implies a global hegemony that does not, in fact, exist because the boundary between the global and the local as well as the power dynamics of global culture are not fixed but constantly moving and changing. Today's musical scene in Korea shows interesting reversals from the 1990s, when Korean producers were eager to debut on Broadway and impress American audiences. Korean producers no longer look up to Broadway as a final destination; instead they want to make Seoul a new Broadway. They import Broadway musicals and turn them into Korean shows. The glamor of Broadway is no longer the main attraction of musicals in Korea. What young audiences look for most is the glamor of K-pop idols and utopian feelings of abundance, energy, intensity, transparency and community, which they can experience live in the musical with their favorite stars right in front of their eyes. In conclusion, I delve into the complex dynamics of recent Korean musicals with Thomas Friedman's theory of Globalization 3.0 as reference. The binary formula of Global/America versus Local/Korea cannot be applied to the dynamic and intercultural musical scene of today. Globalization is not a uniform phenomenon but rather a twofold (multifold) process of global domination and dissemination, in which the global and the local conflict and are conflated constantly. As this study tries to illuminate, the Korean musical has evolved in a huge net of interdependences between the global and the local with a range of sources, powers and influences.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권7호
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• 대한의생명과학회지
• /
• 제19권2호
• /
• pp.118-123
• /
• 2013

Tumor necrosis factor-alpha (TNF-${\alpha}$) is a proinflammatory cytokine that mediates the inflammatory response and immune functions, and modulates the proliferation, differentiation and cell death of cancer cells. The differential functions of TNF-${\alpha}$ in various human cells due to the formation of different stimulating pathway upon the binding of TNF-${\alpha}$ to its receptors. In the present study, we examined the different effects of TNF-${\alpha}$ on the survival and apoptosis between normal granulocytes and human myeloid leukemia HL-60 cells. Although TNF-${\alpha}$ did not affect on the constitutive apoptosis of granulocytes, TNF-${\alpha}$ strongly induced the apoptosis of HL-60 cells in a dose- and a time-dependent manner. TNF-${\alpha}$-induced apoptosis was occurred via the activation of caspase 8, caspase 9 and caspase 3/7 and the induction of ROS production in HL-60 cells. Also, BAY-11-7085, a NF-${\kappa}B$ inhibitor, blocked the TNF-${\alpha}$-induced apoptosis in HL-60 cells. NF-${\kappa}B$ may be involved in TNF-${\alpha}$-induced apoptotic signaling pathway in HL-60 cells. These results suggest that TNF-${\alpha}$ activates apoptotic pathways and its process depends on cell type and many cellular factors. A better understanding of the differential effect of TNF-${\alpha}$ on cell apoptosis and survival may provide important information that can be used to elucidate the specific inhibitory effect of TNF-${\alpha}$ on the cancer dis.

• 복식
• /
• 제58권8호
• /
• pp.91-105
• /
• 2008

Spatial multiplication phenomenon, expressed through de-constructive trend since the late of 20C, have got changed existing fixed and dis-variable space to smooth, fluid, and changeable space. Ex-form and fluidity of new spatial paradigm have been focused through lots of scientific theories studied between digital thought and indeterminacy and rankless nature phenomena. In 21C fashion, indeterminate and irregular form and space have been crested continuously, which could not explain simply according as the fluidity theory Different from the space crested for multi-function and multipurpose, this is revealed the characteristics of chaosmos that communizes the order and the disorder, deconstruction and creation. Ex-formal space of fashion have shown the relationship of de-centerizing, de-territorial, and do-structural phenomenon among different fashion elements. This paper intends to understand the concept of ex-form, and study expressive manners of ex-formal space of 21C fashion, and conclusion as follows. 1) Overlap changes single space of fashion to multi-layered space through the repeat system of pleats, origami, and folding. 2) Ex-gravity expressed in deviation of the gravity acting vertical direction, for example, twisting, curve, winding, portion. 3) Morphing is shown the change process from single fixed form to different complex form. 4) Blurring is expressed in re-combination and re-arrangement among elements of fashion. 5) Blob shows hybrid fashion space through the liberal compounding and separation of a lot of different elements.

• 한국전자파학회논문지
• /
• 제16권1호
• /
• pp.102-112
• /
• 2005

본 논문에서는 CSP(Chip Size Package)를 이용하여 정합소자 및 모든 바이어스소자, ESD(Electrostatic Dis-charge) 보호소자를 MMIC상에 완전집적한 K/Ka밴드 광대역 MMIC chip set에 관하여 보고한다. CSP에 대해서는 이방성 도전필름인 ACF(Anisotropic Conductive Film)를 이용하였으며, 그 결과 MMIC 패키지 프로세스가 간략화 되었고, CSP MMIC의 저 가격화가 실현되었다. MMIC상에 집적하기 위한 DC 바이어스 용량소자로서는 고유전율의 $STO(SrTi_{3})$ 필름 커패시터가 이용되었으며, DC 피드소자와 ESD 보호소자로서는 LC 병렬회로가 사용되었다. 그리고, K/KA 밴드 광대역에 걸친 MMIC의 정합과 안정도를 위해서는 프리매칭회로와 RC 병렬회로가 이용되었으며, 제작된 CSP MMIC는 광대역(K/Ka) 밴드에서 양호한 RF 특성을 보였다. 본 논문은 K/Ka 밴드의 주파수 대역에 있어서의 완전집적화 CSP MMIC 칩셋에 관한 최초의 보고이다.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제4권10호
• /
• pp.349-360
• /
• 2015

웹을 이용하는 사용자가 증가함에 따라 피싱 공격이 점차 증가하고 있다. 다양한 피싱 공격에 효과적으로 대응하기 위해서는 피싱 공격에 대한 올바른 이해가 필요하며 적절한 대응 방법을 활용할 수 있어야 한다. 이를 위해 본 논문에서는 피싱 공격의 절차를 접근 유도 단계와 공격 실행 단계로 정의하고 각 단계에서 발생하는 피싱 공격의 유형을 분석한다. 이와 같은 분석을 통해 피싱 공격에 대한 인식을 재고하고 피싱 공격의 피해를 사전에 예방할 수 있다. 또한, 분석된 내용을 기반으로 각 피싱 유형에 대한 대응 방안을 제시한다. 제안하는 대응 방안은 각 단계별로 적합한 웹사이트 특징을 활용한 방식이다. 대응 방안의 유효성을 판단하기 위하여 제안한 특징 추출 방안을 통해 휴리스틱 기반 악성 사이트 분류 모델을 생성하고 각 모델의 정확도를 검증한다. 결론적으로 본 논문에서 제안하는 방안은 안티 피싱 기술을 강화하는 기초가 되고 웹사이트 보안 강화의 기반이 된다.