• 자원환경지질
• /
• 제33권6호
• /
• pp.547-556
• /
• 2000

The purpose of this study is to analyze shear fracture system using landslide location occurred 1998 at Janghung area. For the geological implication, foliation was surveyed and analyzed, and location of landslide, geological structure and topography were constructed into spatial database using GIS. With the constructed spatial database, shear fracture system was assessed by the relation analysis between strike and dip of the foliation and aspect and slope of the topography. We compared strike and dip of foliation and aspect and slope of topography and recognized the typical fracture pattern, strike and dip of joint, that coincided with shear fracture system. The result tells us that foliation of gneiss has geometrical relation to joint or fault that leading landslide. GIS was used to analyze vast data efficiently and the result can be used to assess the landslide susceptibility as important factor.

• 자원환경지질
• /
• 제31권6호
• /
• pp.547-555
• /
• 1998

A new trigonometrical method for calculating total slip (T) of faulting is presented. The parameters for the calculations are used rake of fault striation, strike and dip of fault and of index planar structure such as bedding plane. The faults are groupped into three types. The direction of plunging of fault striation is out of a range ${\pm}90^{\circ}$ to the bedding dip direction in $360^{\circ}$ system, which is groupped into the type I. Meanwhile, the case of the direction lies in the above range can be separated into two different types, type II and type III, according to relative largeness of the angles rake of fault striation and i (see text). The type II has smaller rake than angle i and the type III has larger rake than angle i. Here I propose a few equations for calculating not only total slip (T) but strike slip (L) or dip slip (S) of the faulting. The equations are adapted selectively to the types of fault mentioned before. The limitation of the method is that the equations do not fit to polyphase faulting.

• Journal of the korean society of oceanography
• /
• 제39권1호
• /
• pp.14-19
• /
• 2004

Difference of Dissolved Inorganic Phosphorus (DIP), Dissolved Inorganic Nitrogen (DIN) and Dissolved Silicate (DSi) budgets in the Bohai Sea between 1982 and 1992 related the decrease of the Yellow River discharge is discussed on the basis of observed data. The estuarine circulation in the Bohai Sea had been weakened from 1982 to 1992 due to the decrease of the Yellow River discharge and the average residence time of fresh water had become longer. DIN concentration increased but DIP and DSi concentrations decreased from 1982 to 1992 in the Bohai Sea. Primary production was regulated mainly by water temperature and DIN concentration in 1982 but it was regulated mainly by DIP concentration in 1992. Primary production was larger than decomposition plus bottom release and nitrogen fixation was larger than denitrification in 1982. However, decomposition plus bottom release was larger than primary production and denitrification was larger than nitrogen fixation in 1992 in the Bohai Sea.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 춘계학술대회 논문집
• /
• pp.108-119
• /
• 2001

The Spectral Analysis of surface Waves(SASW) Method has a great has a great potential for rapid determination of shear wave velocity profile of ground. However, it has an inherent limitation in the interpretation of test results due to the assumption that the ground is layered horizontally. The reason of the assumption is that difficulties exist in obtaining analytical solutions of wave equation when a soil system is composed of inclined soil layer. In this study, a finite-element method has been employed to assess the effects of dip angle and stiffness contrast of inclined soil layers and the testing direction on the dispersion curve. The propagation of wave front in the inclined soil layer was also investigated. The results indicated that the influence of dip angle on the dispersion curve is getting obvious as the dip angle increases and the propagation of wave front in the inclined layer also entirely different compared with the case of the horizontal layer.

• Corrosion Science and Technology
• /
• 제10권1호
• /
• pp.30-36
• /
• 2011

The effect of dynamic flow or forced convection were investigated and compared on the formation of inhibition layer, galvanizing and galvannealing reactions through the hot-dip galvanizing simulator with the oscillation of specimen in zinc bath, continuous galvanizing pilot plant with zinc pumping system through the snout and continuous galvanizing operation with Dynamic $Galvanizing^{TR}$ system. The interfacial Al pick-up was not consistent between the results of simulator, pilot plant and line operation, but the morphology of inhibition layer became compact and refined by the forced convection. The growth of Fe-Zn intermetallics at the interface was inhibited by the forced convection, whereas the galvannealing rate would be a little promoted.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.45-45
• /
• 1991

We describe a simple method for obtaining a narrow dip with subnatural linewidth in Doppler-free laser spectroscopy. The method is based on detecting the absolute magnitude, ｜Re[$\chi$NL($\omega$-$\omega$o)]｜, of the dispersive component (real part) of the nonlinear susceptibility induced by the pump beam, and the line shape recorded therefore exhibits a fully resolved technique and a dual phase lock-in amplifier, we have demonstrated the dip as narrow as 3 MHz in the laser-induced birefringence spectrum of the Na D1 line (natural linewidth 10 MHz). Possible spectroscopic applications are considered.

• 자원환경지질
• /
• 제32권5호
• /
• pp.495-502
• /
• 1999

Common-mid-point (CMP) seismic data on a dipping layer have have a stacking different from a horizontal layer velocity and the reflection points on data are dispersed to many positions. Therefore, the CMP data are not stacked well by the conventional stacking method using the horizontal layer velocity. The CMP gather can ideally stacked by applying dip-moveout(DMO) processing. Hence, modern seismic processing indludes DMO as an essential routine step. DMO processing techniques are broadly categorized by two, Fourier transform and integral methods, each of which has many different computational schemes. In this study, the dip-decomposition technique of the Fourier transform method is used to test the DMO effect on the synthetic scismic data generated for dipping structures. Each of constnat offset sections NMO corrected by using the layer velocity of the model and DMO processed. The resulting zero-offset sections for many offsets are stacked. The stacked sections with DMO processing show the structural boundaries of the models much better than those without DMO processing.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.42-49
• /
• 1999

Although many researches have been made on the adsorption of cationic starches onto chemical pulp fibers, only limited studies have been reported for deinked pulp(DIP) and thermomechanical pulpI(TMP). In this experiment, the adsorption behavior of the cationic starches onto DIP and TMP fibers investigated. Almost complete adsorption of cationic starches onto the pulp fibers were observed when the addition rate of starch was low. Adsorption ratio decreased abruptly when 3.5% and 4.0% of cationic starches were adsorbed onto deinked pulp and thermomechanical pulp, respectively. Adsorption of cationic starches increased as the degree of substitution decreased and as the pH of the pulp slurry increased. TMP fibers adsorbed more cationic starches than DIP because of its greater charge density, and this led to greater improvement in strength properties for the TMP sheets.

• 한국표면공학회지
• /
• 제24권1호
• /
• pp.18-24
• /
• 1991

In the present work the adhesion failure of a hot-dip galvanized coating has been studied as a function gas composition temperature of strip and of atmospheric gas in furnace. The adhesion failure of the hot-dip galvani-zed coating is classified as three mechanisms : carbon deposition, oxide film formation and alloy layer formation. The adhesion failure due to oxide film formation decreased markedly by increasing the gases temperature of direct fired furnace(DFF) in order to improve the reducing ability of steel strip. Optimum conditions of operating and manufacturing facilities for improving the coating adherence are suggested by analyzing the interface between steel substrate and coating layer.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2001년도 International Symposium on Dietary and Medicinal Antimutgens and Anticarcinogens
• /
• pp.108-109
• /
• 2001

Resveratrol (3, 5, 4'-trihydroxystilbene) is a naturally occuring molecule, synthesized by several plants in response to different stresses. Recently many studies performed in human and mammalian cells demonstrated the involment of resveratrol in the modulation of several biological processes (inhibition of lipidic peroxidation, platelet aggregation, estrogenic activity). It has also been found to possess scavenging and antioxidant properties (1).(omitted)