• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.2
• /
• pp.85-91
• /
• 2021

This paper introduces a modified Karagozian & Case concrete model (K&C model) for the numerical analysis of a steel-fiber-reinforced concrete (SFRC) structure subjected to projectile impact. The original K&C model was calibrated to consider the effects of steel fibers accurately by modifying the strength surfaces and input parameters. Single element tests were then conducted and compared with uniaxial and triaxial compressive data to verify the modified model. With the application of a dynamic increase factor, the finite element model of the SFRC structure subjected to projectile impact was constructed. Thereafter, the applicability of the modified material model was examined by comparisons with the experimental results.

• Computers and Concrete
• /
• v.32 no.5
• /
• pp.499-511
• /
• 2023

Anchor channels are commonly used for façade, tunnel, and structural connections. These connections encounter various types of loadings during their service life, including high rate or impact loading. For anchor channels that are placed close and parallel to an edge and loaded in shear perpendicular to and towards the edge, the failure is often governed by concrete edge breakout. This study investigates the transverse shear behavior of the anchor channels under quasi-static and high rate loadings using a numerical approach (3D finite element analysis) utilizing a rate-sensitive microplane model for concrete as constitutive law. Following the validation of the numerical model against a test performed under quasi-static loading, the rate-sensitive static, and rate-sensitive dynamic analyses are performed for various displacement loading rates varying from moderately high to impact. The increment in resistance due to the high loading rate is evaluated using the dynamic increase factor (DIF). Furthermore, it is shown that the failure mode of the anchor channel changes from global concrete edge failure to local concrete crushing due to the activation of structural inertia at high displacement loading rates. The research outcomes could be valuable for application in various types of connection systems where a high rate of loading is expected.

• Journal of Microbiology
• /
• v.42 no.4
• /
• pp.299-304
• /
• 2004

To investigate the presence of infectious agents in human atherosclerotic arterial tissues. Atherosclerotic plaques were removed from 128 patients undergoing carotid endarterectomy or other bypass proce­dures for occlusive disease, and from twenty normal arterial wall samples, obtained from transplant donors with no history of diabetes, hypertension, smoking, or hyperlipidemia. Using the polymerase chain reaction (PCR) or reverse transcription-PCR, these samples were analyzed for the presence of Chlamydia pneumoniae, cytomegalovirus, enterovirus, adenovirus, herpes simplex viruses types 1 and 2, and Epstein-Barr virus. The amplicons were then sequenced, and phylogenetic analyses were per­formed. Enteroviral RNA was found in 22 of 128 atherosclerotic vascular lesions $(17.2\%),$ and C. pneu­moniae and cytomegalovirus were each found in 2 samples $(1.6\%).$ In contrast, adenovirus, herpes simplex viruses, and Epstein-Barr virus were not identified in any of the atherosclerotic samples. Enterovirus was detected in 6/24 $(25.0\%)$ aortas, 7/33 $(21.2\%)$ carotid arteries, 6/40 $(15.0\%)$ femoral arteries, and 3/31 $(9.7\%)$ radial arteries of patients with chronic renal failure. There were no infectious agents detected in any of the control specimens. Using phylogenetic analysis, the enterovirus isolates were clustered into 3 groups, arranged as echovirus 9 and coxsackieviruses Bl and B3. Enteroviral RNA was detected in $17.2\%$ of atherosclerotic plaques, but was not observed in any of the control spec­imens. This suggests a connection between enteroviral infection and atherosclerosis. These findings dif­fer from those of other studies, which found more frequent incidence of C. pneumoniae and cytomegalovirus infection in atherosclerotic plaques.

• Korean journal of food and cookery science
• /
• v.12 no.4
• /
• pp.557-561
• /
• 1996

Physicochemical properties of nonwaxy (Dongjin byeo) and waxy (Sin-seunchal byeo) brown rice flour were investigated. The proximate composition of nonwaxy brown rice flour was 7.02% of protein, 1.14％ of ash, 3.2% of lipid and that of wfny brown rice was 7.74% of protein, 1.48% of ash,4.83% of lipid. X-ray dif- fraction patterns were A types, and relatives crystallinity of nonwaxy brown rice flour was higher than that of waxy brown rice flour. Swelling power and solubility increased with the increase of temperature, waxy brown rice flour showed higher than nonwaxy rice flour until 70$^{\circ}C$, but lower after 80$^{\circ}C$. The gelatinization temperature, breakdown and consistency of nonwaxy brown rice flour by amylogram were higher than those of the waxy brown rice flour but setback was same. The initial gelatinization temperature and the enthalpy of nonwaxy brown rice flour by DSC were higher than those of the waxy brown rice flour.

• Journal of the Korean Chemical Society
• /
• v.46 no.3
• /
• pp.252-264
• /
• 2002

In this study, the experimental apparatus for boiling point and melting point in science textbooks of various curriculums were analyzed. Science teachers' views on the difference between the experimental value and the value written in textbooks were inquired, too. Their views on the experimental apparatus, nd results of freezing point,melting point, boiling point, fractional distillation, and thermometer calibration were also investigated. The results of this study showed that the types of experimental apparatus for boiling point and melting point were somewhat dif-ferent with science textbooks and curriculum. The teachers' views were also various according to their background. In the experiment of the fractional distillat ion, a large number of teachers recognized mismatch between the exper-imental value and the value written in textbooks as mistake of textbook contents or problem of experiment itself. The teachers of chemistry background take higher recognition of the requirement of thermometer calibration than those of non-chemistry background in middle school.

• Parasites, Hosts and Diseases
• /
• v.30 no.3
• /
• pp.163-168
• /
• 1992

Hugot (1983), Hugot and Tourte-Schaefer (1985) reported that nematodes of the genus nnterobius causing human enterobiasis might be classified into two difEerent species on the basis of the size and shape of spicule in male worms. E. gregorii Hugot, 1983 has signif;cantly shorter spicules in males than those in E. vermicularis. A total of 194 male Enterobius were collected from 17 schoolchildren by anthelmintics at Wonju, Kangwon-do. The sizes of spicules and morphologies were comparatively observed. Two different types of spicules in male Enterobius were also observed in Korea. Out of 112 male worms observed, the percentages of E. gregorii (short-spicule type) and E. vermicularis (long-spicule type) were 23.2% and 76.8%, respectively.

• Parasites, Hosts and Diseases
• /
• v.30 no.4
• /
• pp.323-328
• /
• 1992

Analysis of siR isolates of Trichemenes veginalis was carried out with sodium dodecyl sulfate- polyacrylamide gel electrophoresis (SDS-PAGE) and enzyme-linked immunoelectrotransfer blot (EITB). Trichloroacetic acid-treated antigens of the 6 isolates revealed 25 protein profiles ranging 12~170 kDa of molecular weight in SDS-PAGE. In EITB, the specific immunogenic bands were visualized at 51 kDa and 96 kDa when HY-1 antigen was probed with difFerent mice sera immunized with 6 isolates of T. vaginalis. The banding patterns with different sera showed isolate-to-isolate variability. In EITB, homologous antigen (HY-1) did not show any enhanced response in reacting to homologous antiserum(HY-1) when 6 isolates of T. vaginalis were probed with a single serum (HY-1). It is assumed that the different banding patterns of six isolates show isolate-to-isolate variability and immunogenic common bands in 41, 47, 74 and 9:k kDa on EITB may connote the important significance on immune response in T. vaginalis infection.

• Journal of Chest Surgery
• /
• v.30 no.9
• /
• pp.941-944
• /
• 1997

Pulmonary infarction is rarely diagnosed with certainty except at postmortem examination. Part of this uncertainty is because of the inability to distinguish between hemorrhage, congestive a electasis, and necrosis clinically and radiographically. The pathogenesis of pulmonary infarction is poorly understood. It is dif%cult to induce pulmonary infarction in animals by ligation of the arterial supply to the lung. Many factors seem to be important in its pathogenesis, in addition to congestive heart failure, malignant tumor, thrombophlebitis, chronic obstructive lung disease, nephrotic syndrome, and postopeiative state. However, pulmonary infarction have not been reported in association with chest trauma. We report a case of pulmonary infarction associated with fractures of right clavicle and multiple ribs. A 45-year-old male had admitted due to right chest pain and dyspnea, which developed after right chest trauma occurred at about 3 weeks ago. He was treated at local clinics under the diagnosis of fractures of right clavicle and ribs until the admission. Chest CT disclosed a huge mass with central low density in right upper lobe, and small masses were also seen on both l ng fields. Open lung biopsy resulted in negativity for the malignancy. Clinical symptoms and radiological findings were not improved by conservative treatment. Right upper lobectomy was done eventually. The final diagnosis was pulmonary infarction. And, the patient has been well after operation.

• Transactions of Materials Processing
• /
• v.7 no.4
• /
• pp.333-339
• /
• 1998

Hot torsion tests were conducted to investigate the high temperature deformation behavior of $Al_{85}Ni_{10}Y_5$ alloy extrudates fabricated with amorphous ribbons. The powder metallurgy routes, hot pressing and hot extrusion were used to fabricate the extrudates. Thermal properties of amorphous ribbons with different thickness as a function of aging temperature were studied by thin film x-ray dif-fraction (XRD) and differential scanning calorimetry(DSC). The Al phase crystallite firstly formed in the amorphous ribbons and its crystallization temperature($T_x$)Was ~210${\circ}C$ During the processings of consolidation and extrusion, nano-grained structure(~100 nm) was formed in the Al85Ni10Y5 alloy extrudates. The as-extrudated Al85Ni10Y5 alloy and the $Al_{85}Ni_{10}Y_5$ alloy annealed at 250${\circ}C$ for 1 hour showed a flow curve of DRV(dynamic recovery) during hot deformation at 400-550${\circ}C$. On the other hand, the $Al_{85}Ni_{10}Y_5$ alloy annealed at 400${\circ}C$ for 1 hour showed a flow curve of DRX(dynamic recrys-tallization) during hot deformation at 450-500${\circ}C$. Also the flow stress and flow strain of the $Al_{85}Ni_{10}Y_5$ alloy extrudate annealed at 400${\circ}C$ were higher than those at 250${\circ}C$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.93-102
• /
• 2020

This study investigated the dif usion characteristics of Ecklonia cava spores around marine forest reefs. For this purpose, a numerical analysis was conducted using field observations in the target area and an EFDC model. Based on the results of field observations and the EFDC model, Flow-3D was performed on three types of marine forest reefs, mamely triangular pyramid reef, double-dome reef, and ribbed reef, to monitor the movement direction and maximum movement distance for E. cava spores. As a result, the equilaterally triangular pyramid reef and double-domed reef were found to have a maximum settlement of spores of 10 m in the northwestern direction and 6 m in the western direction. The ribbed reef had a maximum settlement of spores at 4m. These results show that consideration of the diffusion characteristics of E. cava spores when the seaweeds are installed can increase the effectiveness of the algae as substrate of adhesion.