• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.569-583
• /
• 1995

Disinfection of dental impressions are necessary due to contamination with patient’s saliva and blood, which is a potential for cross-infection. The purpose of this study was to evaluate the effects of disinfection of four hydrophilic rubber impression materials with three disinfecting solutions, on the dimensional stability and surface hardness of improved stone casts. Three hydrophilic vinyl polysiloxane impression materials(Express, Reprosil, Exafine) and one polyether impression material(Impregum-F) were mixed according to the manufacturer’s directions and impressions were made on a ADA specification No. 19 stainless-steeldie. On removal of the impressions, each impression was immersed in one of the disinfectants(Banicide, Potadine, Clorox) for 10 minutes. After disinfection, type IV improved stone. casts were poured. On this cast, the linear dimension and surface hardness were measuredusing a Measurescope(Nikon, Japan) and a Barcol hardness tester(Barber, Colman Co U. S. A). The results were as follows : 1. The improved stone casts from disinfected Reprosil and Impregum-F impression material did not show dimensional changes(P>0.01). Those from disinfected Express and Exafine impression material showed dimensional changes(P<0.01). The amount of shrinkage was not clinically significant. 2. The improved stone casts from disinfected Express impression material did not exhibit changes in surface hardness(P>0.01), but those from disinfected Reprosil, Exafine, Imp regnum-F impression material showed changes in surface hardness(P<0.01). 3. The dimensinal stability and surface hardness of the improved stone casts were satisfactory using Banicide on Express, all disinfectants used in this study on Reprosil, Potadin and Clorox on Exafine, Banicide and Clorox on Impregum-F. According to these results, immersion disinfection of hydrophilic rubber impression mate rials did not adversely affect the resultant casts. Nevertheless compatibility tests of impression materials and disinfectants should be done when disinfecting impressions.

• Journal of Environmental Science International
• /
• v.16 no.5
• /
• pp.623-632
• /
• 2007

The objective of this study is analysis of Andong-Dam lake water quality with water quality model. Model parameters of the WASP applied to Lake Andong-Dam were estimated. The methodology is based on grouping water quality constituents and relevant parameters and successively estimating parameters by a trial-and-error procedure. Water qualify system for modeling consisted of BOD, DO, T-N, T-P. The results of water quality modelling using WASP. T-N was maximum affected by K71C(Organic nitrogen mineralization rate) parameter. T-P was maximum affected by K83C(Dissolved organic phosphorus mineralization) parameter, and It did not show a difference almost from the parameter of others and it omitted. BOD was maximum affected by Temperature parameter, it was visible of the reaction due to the KDC(Deoxygenation rate) in afterwords, and it did not show a difference from the parameter of others and it omitted. DO was maximum affect by Temperature parameter, and It did not show a difference almost from the parameter of others and it omitted. The parameter which it presumes from the this study uses a water quality modeling and Actual value and the result with which it compares, error rate the parameter presumption which is appropriate with 1% interior and exterior is investigated, It will reach and it uses and it will be able to apply to the suitable parameter in water quality modelling of the objective area which can be feeded by it becomes.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.558-567
• /
• 2017

This study was conducted to analyze the turnover intentions of railway traffic controllers among employees of a domestic railway corporation. Variables influencing job turnover intention included exploited variables (empowerment, job stress, job satisfaction, organizational commitment, exhaustion) that have been actively studied in other fields. The results showed that the empowerment of railway traffic controllers did not directly affect job stress and turnover intention, but had a direct effect on job satisfaction, organizational commitment, and exhaustion. Job stress did not directly affect job satisfaction, organizational commitment, and exhaustion, and job satisfaction did not directly affect organizational commitment, burnout, and turnover intentions. Burnout has a direct effect on turnover intention, indicating that exhaustion of railroad traffic controllers has an effect on turnover intentions. In conclusion, empowerment has a direct effect on burnout and exhaustion has a direct effect on turnover intention. This study suggests that management of empowerment and exhaustion is important for the prevention of turnover of railway traffic controllers.

• Journal of Korean Academy of Nursing
• /
• v.48 no.6
• /
• pp.692-707
• /
• 2018

Purpose: We aimed to examine the effects of an integrated physical activity (PA) program developed for physically inactive workers on the theoretical basis of the PRECEDE-PROCEED model. Methods: Participants were 268 workers in three departments of L manufacturing unit in South Korea. The three departments were randomly allocated into integration (n=86) (INT), education (n=94) (ED), and control (n=88) (CT) groups. The INT group received self-regulation, support, and policy-environmental strategies of a 12-week integrated PA program, the ED group received self-regulation strategies only, and the CT group did not receive any strategies. After 12 weeks, process evaluation was conducted by using the measures of self-regulation (autonomous vs. controlled regulation), autonomy support, and resource availability; impact evaluation by using PA measures of sitting time, PA expenditure, and compliance; and outcome evaluation by using the measures of cardiometabolic/musculoskeletal health and presenteeism. Results: Among process measures, autonomous regulation did not differ by group, but significantly decreased in the CT group (p=.006). Among impact measures, PA compliance significantly increased in the INT group compared to the CT group (p=.003). Among outcome measures, the changes in cardiometabolic/musculoskeletal health and presenteeism did not differ by group; however, systolic blood pressure (p=.012) and a presenteeism variable (p=.041) significantly decreased only in the INT group. Conclusion: The integrated PA program may have a significant effect on increases in PA compliance and significant tendencies toward improvements in a part of cardiometabolic health and presenteeism for physically inactive workers. Therefore, occupational health nurses may modify and use it as a workplace PA program.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.149-158
• /
• 2019

In this study, the concept of emotional labor and AI(appreciative inquiry) are connected to examine how acceptance of AI, which is related to changes in hospital organizational culture, affects nurses' emotional labor, organizational commitment, and job satisfaction. For this purpose, the data collected from 156 nurses working at a major hospital were analyzed using structural equation modeling. The findings of this study are as follows: First, nurses' acceptance of AI had a significant positive effect on deep acting but not on surface acting. Second, deep acting had a significant positive effect on organizational commitment, but surface acting did not. Third, nurses' organizational commitment had a significant positive effect on job satisfaction. Fourth, deep acting significantly mediated the relationship between nurses' acceptance of AI and organizational commitment, but surface acting did not. Fifth, deep acting and organizational commitment significantly mediated the relationship between nurses' acceptance of AI and job satisfaction, but surface acting and organizational commitment did not. Theoretical and practical implications are provided based on the relationships between the variables found in this study.

• Journal of Technology Innovation
• /
• v.31 no.3
• /
• pp.201-230
• /
• 2023

The Innovation Procurement Policy was introduced as part of the strategic public procurement policy to improve firms' innovation capabilities and enhance the public sector's ability to solve social problems by designating and purchasing so-called 'innovative products.' The pilot procurement project for innovative products was first introduced in 2019, and the policy system for designating and discovering innovative products by government departments, as well as the priority purchase system, was established in 2020. Hence, this study conducted a quantitative analysis focusing on the effectiveness of the innovation procurement system in supporting firms after it was fully implemented. For this purpose, corporate financial and employment data from 2017 to 2021 were used, and propensity score matching(PSM) and difference-in-difference(DID) methods were utilized as analytical tools. The study found that the innovation procurement system contributed to corporate growth and employment and created additional public and private sales channels. Moreover, it is necessary to enhance the innovation procurement system, such as matching innovative product-producing companies with existing SME support policies, for companies to become self-sustaining after the innovative product designation ends.

• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.387-394
• /
• 2013

The developmental times of mealworm beetle larvae, Tenebrio molitor were studied at six temperatures ranging from 15 to $30^{\circ}C$ with 60~70% RH, and a photoperiod of 14L:10D. Mortality of larval period was very low at 17 and $20^{\circ}C$ but did not die over $22^{\circ}C$. Developmental time of larva was decreased with increasing temperature. The total developmental time of T. molitor larvae was longest at $17^{\circ}C$ (244.3 days) and shortest at $30^{\circ}C$ (110.8 days). Egg and larvae were not developed at $15^{\circ}C$. The lower developmental threshold and effective accumulative temperatures for the total larval stages were $6.0^{\circ}C$ and 2564.1 degree-days, respectively. The relationship between developmental rate and temperature was fitted by a linear model and nonlinear model of Logan-6($r^2$=0.95). The distribution of completion of each development stage was well described by the 2-parameter Weibull function ($r^2$=0.8502~0.9390).

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.635-657
• /
• 2015

The current society characterized by knowledge-based information technology and multiculturalism put more emphasis on problem-solving skills, creative thinking, and communication skills than any other periods did. In response to the demand of the current times, multidisciplinary, or convergence courses and majors are being created and conducted in college education, yet, with the lack of specific teaching and learning model for the convergence courses. In this context, this study aimed to examine PBL as an instructional model for the convergent approaches in classroom, since PBL has been regarded as a model for fostering the 21st century learning capabilities for student coupled with the learning principles of authentic tasks, learner-centeredness, collaborative learning. This study, after conducted a PBL course for the general art education during the summer semester of 2014, analyzed the result using data collected from students' reflective journals, in-depth interviews, and SNS posts among the students. The result presented students' enhanced self-respect, increased interest in their learning and communication skills, and their recognition of the value on diversity and empathetic attitudes toward each others. In conclusion, PBL showed its potential as an alternative instructional model for the multidisciplinary and convergent learning in college education.

• Journal of The Korean Association For Science Education
• /
• v.39 no.6
• /
• pp.799-807
• /
• 2019

The study was conducted to identify if the first-year program of science-focused school improved students' scientific core competency and science learning motivation. The first-year program of the science-focused school consisted of basic education in scientific inquiry, investigation, advanced experiment, and basic education in small research. There were a total of 262 participants in the program, and 169 students took three survey tests. Through the analysis of a group-based trajectory modeling, students were differentiated based on similarity of score changes. This study showed that the first-year program of the science-focused school significantly improved students' scientific core competency and science learning motivation. A group-based trajectory modeling found that about 40~60% of students saw the effects of the program. The students who chose the humanity track showed effects, while some students who chose the science-focused track did not show effects. A group-based trajectory modeling showed the methodological effects of identifying the change process of individual students. This study identified the positive effects of science-focused school policy statistically and is a meaningful example for analyzing the effectiveness of science-focused school programs.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.132-147
• /
• 2008

So far ubiquitous service (u-service) priority has seldom been empirically examined based on the customer's view. It is usual to prioritize the relative importance of u-service variables by the supplier's intuition and a few specialist's experienced knowledge. Such approaches have the disadvantage that they provide only limited empirical information on the field practices in relation to u-service since customer demand of u-service is poorly defined despite abundant interest in this problem. Therefore, the aim of this research was to develop u-service priority model in the context of multi-criteria framework integrating customer and supplier's view, using high technology acceptance theory as major controlling factors. An important question was how to measure or represent criteria that is important to u-service and should be included in a priority model. The selection criteria for the model variables were derived from high technology acceptance theory and AHP approach through the analysis of frequency count, elimination of overlapping factors and brainstorming with specialists. Daegu showed top-rankings in transportation-aid service, guidance service for the eyesight disabled and u-telematics service. In contrast, disaster prevention service and industrial specialized town service ranked highly in the typical supplier's approach were not a dominant determining factor in the u-service priority. The model identified the fact that typical high priority service in terms of supplier's view did not necessarily accompany the important predictor for the u-service priority.