• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.39-47
• /
• 2018

The Dial Algorithm, based on single link based calculation, is unable to reflect cyclic paths arising in actual urban transportation networks. At the same time, redefining the paths more efficiently can, by strict standards, lead to irrational results stemming from reduction in the size of the network to be analyzed. To solve these two problems of the Dial algorithm, the research herein proposes a vine network method applied to a link based Dial Algorithm, in which the original three step alogrithm is modified into a vine network-based three step process. Also, an analysis of two case study networks show feasible replication of the predicted cyclic path, unrealistic flow, and unsteady transit, as well as alleviation of the problem of irrational path allocation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.3
• /
• pp.17-21
• /
• 1972

There are two kinds of tile dial Keyserider which is used in recently, one is a electromechanical relay type, the other is a mechanical type. It is, however, that above types are very high cost to manufacture. therefore it is desinged a new type by using the transistor switching circuit so that it is small size and can be manufactured lower cost than other types.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.71-79
• /
• 2016

Evaluation of the walkability of the urban pedestrian network requires construction of a pedestrian network model that reflects Space Syntax Theory. Space Syntax Theory deduces an integration value through which materials for evaluation of the pedestrian network's connectivity can be produced; and can aid in illustrating the ease of walkability through the model's calculation of pedestrian indices such as movability, comfort, and safety. But the representation of space syntax theory in the pedestrian network requires that turn delay be added by means of a network-type construction method. While tree-based Dial Algorithm proposed for the logit-based probability walkability distribution model may be effective for link-based pedestrian volume distribution, it requires further network expansion to reflect turn delays. In this research, Vine-based Dial Algorithm is executed in order to obtain a measure reflecting the integration value for Space Syntax Theory. The Vine-based Dial Algorithm of two adjacent links, which forms the minimum unit of the Vine network, has the advantage of encompassing turn delay, and thus eliminates the need for network expansion. Usage of the model to evaluation of complicated pedestrian spheres such as urban roads is left to further research. Especially the progression of the proposed method is deduced through case study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.423-427
• /
• 2003

In this paper, we have investigated the output characteristics of the Stokes Raman laser in hydrogen, deuterium, and their mixed gases as a function of the incident pump energy and gas pressure using KrF excimer laser as pumping source for generating the differential absorption lidar (DIAL) wavelengths suitable in measuring the ozone concentration of the troposphere. The optimization results of compact excimer-Raman laser transmitter in DIAL system for the tropospheric ozone sounding at the 292 nm/319 m and 292 nm/313 nm wavelength pairs are presented. for the ozone sounding in the 4-12 km range, it has been demonstrated that the design of transmitter for DIAL lidar may be significantly simplified by the use of 292 nm/319 nm wavelength pair. The investigations of Raman scattering in the mixture of hydrogen and deuterium gases have shown that such mixture may be efficiently used for developing the multi- wavelength light sources for DIAL systems.

• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.325-330
• /
• 2012

Differential absorption LIDAR (DIAL) is frequently used for atmospheric gas monitoring to detect impurities such as nitrogen dioxide, sulfur dioxide, iodine, and ozone. However, large differences in the on- and off-line laser wavelengths can cause serious errors owing to differential aerosol scattering. To resolve this problem, we have developed a new DIAL system for iodine vapor measurements in particular. The suggested DIAL system uses only one laser under seeded and unseeded conditions. To check the detection-sensitivity and error effects, we compared the results from a system using two seeded lasers with those from a system using a seeded and an unseeded laser. We demonstrate that the iodine concentration sensitivity of our system is improved in comparison to the conventional two seeded or two unseeded laser combinations.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.238-243
• /
• 1996

We have developed XeCl laser pumped double-resonator Dye laser and two-stage amplifier system, and generated simultaneously of alternatively two wavelengths suitable in DIAL system. The developed double-resonator is composed of 1st and 2nd diffraction orders on light incidence angle in grazing-incidence grating method with 1200 g/mm. We have obtained spectral linewidth below 10 pm and the total efficiency dependent on pump energy over 6%. The tuning ranges dependent on 1st and 2nd diffraction orders are 434~470 nm and 436~468 nm, respectively. The amplification gain and rine-450 dye laser by using the double-resonator laser system and measured the distribution of $NO_2$ concentration over Suwon as the result of transmission of laser output of 6 mJ in this DIAL system. Consequently, we have confirmed that the developed dye laser system is very useful as the tunable source for DIAL.

• Proceedings of the Optical Society of Korea Conference
• /
• 1998.08a
• /
• pp.134-135
• /
• 1998

• 한국HCI학회:학술대회논문집
• /
• 2008.02c
• /
• pp.25-29
• /
• 2008

A virtual prototyping (VP) system provides realistic 3D images of product. A virtual prototype, however, can only be operated using traditional input device like keyboards or mice and cannot present physical interface of the product. This paper describes a haptic dial system for virtual prototyping, which integrates haptic effects with virtual user interface to facilitate product development. A user can interface the virtual prototype with the motor-driven haptic dial with feeling like operating mechanical dial. This system will help product designers sketch user interfaces during the whole stage of product design.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.3
• /
• pp.222-233
• /
• 2010

Developed in this research is a TP (tangible prototyping) system, which consists of two modules; (1) a virtual reality model to evaluate the functions and appearance of the product, and (2) a haptic device to emulate tactile and kinesthetic properties of mechanical dial knobs. As an example, a washing machine is modeled using a commercial CAD system and transformed in VRML and X3D formats. Some dynamic behaviors and kinematic characteristics are programmed using X3D script and Java. Various haptic behaviors of the dial are generated by modulating torque profile according to the rotation angle. A torque profile measuring system is developed to evaluate the behaviors of the haptic dial physically. Haptic sensibility evaluations are accomplished using the TP by semantic differential method.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.5
• /
• pp.305-308
• /
• 2004

The 7-dial inductive voltage divider(IVD) for application at low frequency range which can precisely divide the in put voltage up to resolution of $10^{-7}$ was fabricated by using the toroidal cores made by super-mumetal strips of 0.025 mm thick and special decade switches. The cores have the initial permeability of 200.000 and magnetic flux density of 0.5 T. The inphase and quadrature ratio errors for a fabricated 7-dial IVD are found to be less than $\pm$4${\times}$$10^{-7}$ and $\pm$5${\times}$$10^{-6}$ rad(k=2), respectively. by calibration using the IVD calibration system of KRISS. The fabrication techniques used and uncertainty evaluation are discussed in this paper.