• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.431-438
• /
• 2017

This study investigated the effect of pre-planting nitrogen (N) fertilization levels added to a soilless root medium on the growth of 'Dotaerang Dia' tomato seedlings. The N levels were varied for a total of 7 treatments: 0, 100, 250, 500, 750, 1,000, or $1,500mg{\cdot}L^{-1}$. The pH of the root media gradually rose in all treatments as the seedlings grew; however, the differences in the pH were not significant among the treatments. The electrical conductivity (EC) of the root media was significantly different among the treatments from sowing to week three, then drastically decreased after week four, which diminished the differences in the EC among the treatments. At week six, plant height, leaf length, leaf width, number of leaves, and fresh and dry weights of the shoot were highest for the treatment with $500mg{\cdot}L^{-1}N$. In contrast, the treatment with $1,500mg{\cdot}L^{-1}N$ had the lowest results for all growth measurements. The fresh weight was 67% heavier in the $500mg{\cdot}L^{-1}N$ treatment compared to the $1,500mg{\cdot}L^{-1}N$ treatment. The total N content in the tissues was lowest in the treatment with $0mg{\cdot}L^{-1}N$ and highest in the treatment with $1,000mg{\cdot}L^{-1}N$. The contents of calcium (Ca), magnesium (Mg), and metal micronutrients in the tissues were highest in the $250mg{\cdot}L^{-1}N$ treatment. A previous study demonstrated that adjusting the fertilization level to promote growth to over 90% of the maximum growth is a good strategy for lowering production costs and preventing damage due to excessive fertilizer absorption by crops. Our results indicated that the optimal pre-planting N fertilization level for tomato plug seedlings should be lower than $500mg{\cdot}L^{-1}$ and the optimum tissue N contents should be around 3.21% to 4.60%.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.1
• /
• pp.35-39
• /
• 1995

In order to investigate the effects of gelling agent on rice anther culture, anthers of rice (Japonica cv Daecheongbyeo) were cultured on N$_{6}$ media supplemented with 0.8, 1.2 or 1.6% Junsei agar and 05, 0.4, 0.6, 0.8 or 1.0% Gelrite (Phytagel, Sigma). On Junsei agar media, the frequency of callus induction was decreased in proportion to agar concentration. The frequency of callus induction was more increased as 67.6% and 54.8% in media containing 0.4 and 0.6% Gelrite than in agar media. The frequency of plant regeneration and spontaneous doubled-diploid was directly proportional to Junsei agar and Gelrite concentration. The number of green and spontaneous doubled diploid plant was highest on 0.6% Gelrite medium. In order to optimize the concentration of growth regulators for the callus induction medium containing 0.6% Gelrite, anthers were cultured on N$_{6}$ media supplemented with 2mg/L NAA, 2 mg/L 2,4-D, 1mg/L NAA and 1mg/L 2, 4-D, or 1mg/L NAA, 1mg/L 2,4-D and 0.5mg/L kinetin. The maximum frequency of callus induction and plant regeneration was obtained from the medium supplemented with 2 mg/L NAA and 0.6% Gelrite. In conclusion the induction of embryogenic callus, the frequency of plant regeneration and in vivo chromosome doubling was more effective in Gelrite media than in Junsei agar media.dia.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.2 no.1
• /
• pp.33-40
• /
• 1969

1. Physicochemical properties of sea water and soil of Korean tidal flats densely populated with species of Mactra veneriformis, Cyclina sinensis, Meretrix lusoria, and Tapes philippinarum, were investigated in order to find out the index of environmental factors in marine bivalve culture. 2. The turbidity varied with the change in concentrations of organic matter, silicate, and the exchangeable copper in sea water. All of these concentrations in Inchon, Kunsan, and Hansando were higher than those in Yusoo. In the 5 areas investigated the lowest were ditected at Kangnung. 3. The minerals and organic matter content in sea water dia not vary significantly among the different bivalve beds. And it was presumed that the soil texture was one of the most important environmental factors for the density of the bivalves in tidelands. 4. The soil texture index of the different bivalve beds was obtained as follow: 5. There were no significant differences of pH, the exchangeable calcium, and the exchangeable copper contents of bottom soils in the 4 different bivalve beds. As important factors in these areas, it seems that the amount of chemical properties might not affect the distribution of bivalve species. 6. Among the 4 beds the soil organic matter content was highest at the T. philippinarum bed and varied with the total nitrogen content. 7. Among the different bivalve beds, it was significant that the water holding capacity and available phosphorus content were highest at the M. veneriformis bed.

• Microbiology and Biotechnology Letters
• /
• v.29 no.1
• /
• pp.31-36
• /
• 2001

Paenibacillus sp. JB-13 producing the cyclodextrin glucan-otransferase(CGTase) [EC 2.4.1.19] that glucosylated ascorbic acid(AA) at the C-2 position was isolated form soil and the optimal conditions for the production of 2-O-$\alpha$-D- Glucopyranosl L-Ascorbic acid(AA-2G) with CGTase were investigated. CGTase produced AA-2G efficiently using dextrin as a substrate and AA as an aceptor. Several AA-2-oilgosaccharides(AA-2Gs) were also produced in this reaction mixture, and these were efficiently hydro-lyzed to AA-2G and glucose by the treatment with glucoamylase. The optimal temperature for AA-2G production was $37^{\circ}C$ and the optimal pH was around 6.5. CGTase also utilized $\alpha$-,$\beta$-,${\gamma}$-CDs, soluble starch, com statch, dia-static solution from rice and diastatic solution from malt as substrate, but not glucose. The reaction mixture for the maximal production of AA-2G was following; 15% total substrate concentration, 2,500 units/ml of CGTase and a mixing ration of 3:2(g of AA: g of dextrin). Under this condition, 56 mM of AA-2G ,which corresponded to 12.4% yield based on AA. was produced after incubation for 44 hrs at $37^{\circ}C$ and pH 6.5.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.3
• /
• pp.129-137
• /
• 1989

Sand fish, Arctoscopus japonicus (Steindachner) is distributed in the coastal waters of East Sea of Korea, Japan, and Alaska. On December 1, 1987, matured adult of sand fish were collected from the shore of Ok-kye, Myongju-gun, Kangwon-do, Korea. The authors carried out artificial insemination on boat. The fertilized eggs were incubated and the larvae were reared in laborato교. The eggs of this species were demersal and adhesive, and their diameter were varied within $3.1\~3.4$mm (mean 3.3 mm, n= 10). They have a number of small oil globules. The spawned eggs in nature were formed the egg mass which were measured ca. 4 m in dia-meter. The hatching took place in 65 days after fertilization at the water temperature of $8.7\~12.3^{\circ}C$. The newly hatched larvae were $8.5\~10.2$ mm in total length with 11 (abdominal) +40 (caudal) = 51 myomeres. 24 days after hatching, the larva attained 19.4 mm in total length, at this time the larvae absorbed the yolk completely, and become postlarvae. 32 days after hatching, the larva attained 23.4 mm in total length, and become juvenile. 56 days after hatching, the juvenile reached 29.9 mm in total length and had adult form. 5 spines of preopercle bone were formed at 24.4 mm in total length. At ca. 15 mm in total length, the form of the pectoral fin was transformed into the adult form.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.439-446
• /
• 2006

In ship structures many of the structural plates have cutouts, for example, at inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has a cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed In general, actual ship structure adopted reinforcement of stiffener around the cutout in order to preventing from buckling so it need to examine a buckling and ultimate strength behaviour considering a cutout because In many ship yards used class rule for calculating buckling strength but it is difficult to evaluate perforate stiffened plate with random size. In the present paper, we investigated several kinds of perforated stiffened model from actual ship and then was performed finite element series analysis varying the cutout ratio, web height, thickness and type of cross-section using commercial FEA program(ANSYS) under compressive load.

• The korean journal of orthodontics
• /
• v.19 no.2
• /
• pp.7-24
• /
• 1989

The physical properties of seven sizes of control groups and experimental group in stainless steel orthodontic wires were studied in tension, hardness, bending, torsion and observation of microstructure. The wires (0.40-0.90mm dia.) of round type were tested in the as-received condition. The wires of control groups were TRU-CHROME and REMANIUM, and experimental group was SK wire which was developed by ourselves and made in Korea. The results were as follows; 1. The chemical compositions of control groups and experimental group were austenite stainless steel wires of SOS 304. 2. Higher values of tensile and yield strength in tension were control group I, experimental group, control group II. Maximum tensile and yield strength of experimental group were $203.63{\pm}1.41kg/mm^2$ in 0.70mm diameter and $148.96{\pm}4.88kg/mm^2$ in 0.60mm diameter, and maximum elongation was $5.20{\pm}0.57%$ in 0.45mm diameter. 3. Hardness values of experimental group were similar to control groups. Maximum hardness values were $596.2{\pm}13.66Hv$ in 0.45mm diameter wire of control group I, $590.5{\pm}20.08Hv$ in 0.50mm diameter wire of control group II, and $563.6{\pm}5.35Hv$ in 0.70mm diameter wire of experimental group. 4. Torsion properties of experimental group were similar to control group I and more than control group II. Maximum torsion cycles were $31.8{\pm}2.48$ in 0.45mm diameter of control group I, $17.4{\pm}4.84$ in 0.60mm diameter of control group II, and $24.6{\pm}3.04$ in 0.45mm diameter of experimental group. 5. Maximum bending cycles of experimental group were smaller than control groups. Maximum bending cycles were $9.00{\pm}0.00$ in 0.50mm diameter wire of control group I, $10.0{\pm}0.82$ in 0.40mm diameter wire of control group II, and $8.0{\pm}1.26$ in 0.50mm diameter wire of experimental group. 6. Microstructures of experimental and control groups co-existed with martensited austenite structure and elongated austenite structure. 7. The direction of wire fracture was propagated parallel to torsion direction typically and there was no probability showing wire fracture at inclusions and surface scratches. 8. The type of wire fracture was brittle fracture at initiation site and ductile fracture at core.

• Journal of Life Science
• /
• v.17 no.8 s.88
• /
• pp.1115-1120
• /
• 2007

In the present study, we investigated whether several phytochemicals (resveratrol, genistein, epicatechin gallate, dially disulfide, caffeic acid phenetyl ester) and sulindac sulfide could induce expression of tumor suppressor p53 protein in human colorectal HCT116 cells. We found that p53 was dramatically induced by all phytochemical treatments except sulindac sulfide. Among treated phytochemicals, we selected resveratrol for further experiments because it is one of the highest p53 inducer. Using a Western blot analysis, we found that resveratrol induced p53 in a dose- and time-dependent manner. Additionally, using membrane-based microarray analysis, we found that twenty-five genes were up-regulated and two genes were down-regulated by resveratrol treatment. Among the up-regulated genes, we selected 4 genes and performed reverse-transcription-PCR to confirm microarray data. The results of RT-PCR were highly accorded with those of membrane microarray. In addition, we found that thrombospondin-1 (TSP-1) expression was not dependent on p53 presence, whereas mammary serine protease inhibitor (MASPIN) expression was dependent on p53 expressed by resveratrol treatment. The results of this study may help to promote our understandings of the molecular mechanisms of chemoprevention that are mediated by resveratrol in human colorectal cancer.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.113-120
• /
• 2005

3D reconstruction of a scene structure from un-calibrated image sequences has been long one of the central problems in computer vision. For 3D reconstruction in Euclidean space, projective reconstruction, which is classified into the merging method and the factorization, is needed as a preceding step. By calculating all camera projection matrices and structures at the same time, the factorization method suffers less from dia and error accumulation than the merging. However, the factorization is hard to analyze precisely long sequences because it is based on the assumption that all correspondences must remain in all views from the first frame to the last. This paper presents a new projective reconstruction method for recovery of 3D structure over long sequences. We break a full sequence into sub-sequences based on a quantitative measure considering the number of matching points between frames, the homography error, and the distribution of matching points on the frame. All of the projective reconstructions of sub-sequences are registered into the same coordinate frame for a complete description of the scene. no experimental results showed that the proposed method can recover more precise 3D structure than the merging method.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.435-445
• /
• 2007

Ship structures are thin-walled structures and lots of cutouts, for example, of inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed. In the present paper, we investigated several kinds of perforated stiffened model from actual ship structure and series of elasto-plastic large deflection analyses were performed to investigate into the influence of perforation on the buckling and ultimate strength of the perforated stiffened plate varying the cutout ratio, web height, thickness and type of cross-section by commercial FEA program(ANSYS). Closed-form formulas for predicting the ultimate strength of the perforated stiffened plate are empirically derived by curve fitting based on the Finite Element Analysis results. These formulas are used to evaluate the ultimate strength, which showed good correlation with FEM results. These results will be useful for evaluating the ultimate strength of the perforated stiffened plate in the preliminary design.