• Korean Journal of Optics and Photonics
• /
• v.2 no.4
• /
• pp.179-185
• /
• 1991

Twyman-Green interferometer is developed for assessment of IR optical system performance. Light source is $CO_2$ gas laser which has 10.6$\mu \textrm m$ wavelength. The light beam is expanded to 2.5 cm dia by Ge lens and splitted by ZnSe parallel plane plate. One of the beams is reflected by refernce mirror which is operated PZT. The fringe will be detected by a pyro-electric vidicon camera and displayed by a CRT monitor. Here, the IR firinge is recorded on the thermal paper. In visible region, the light source is He-Ne laser. The fringe is detected by a CCD camera and displayed by the CRT monitor. The intensity of the fringe is digitized by a image card and processed by a PC. The wavefront aberration function, PSF and OTF are calculated. The results are displayed in 3-D graphs on the monitor or printed out by a line printer.

• Journal of Obesity & Metabolic Syndrome
• /
• v.27 no.4
• /
• pp.213-222
• /
• 2018

Bariatric surgery has evolved from a surgical measure for treating morbid obesity to an epochal remedy for treating metabolic syndrome as a whole, which is represented by type 2 diabetes mellitus. Numerous clinical trials have advocated bariatric or metabolic surgery over nonsurgical interventions because of markedly superior metabolic outcomes in morbidly obese patients who satisfy traditional criteria for bariatric surgery (body mass index [BMI] >$35kg/m^2$) and in less obese or simply overweight patients. Nevertheless, not all diabetes patients achieve the most desirable outcomes; i.e., diabetes remission after metabolic surgery. Thus, candidates for metabolic surgery should be carefully selected based on comprehensive preoperative assessments of the risk-benefit ratio. Predictors for diabetes remission after metabolic surgery may be classified into two groups based on mechanism of action. The first is indices for preserved pancreatic beta-cell function, including younger age, shorter duration of diabetes, and higher C-peptide level. The second is the potential for an insulin resistance reduction, including higher baseline BMI and visceral fat area. Several prediction models for diabetes remission have been suggested by merging these two to guide the joint decision-making process between clinicians and patients. Three such models, DiaRem, ABCD, and individualized metabolic surgery scores, provide an intuitive scoring system and have been validated in an independent external cohort and can be utilized in routine clinical practice. These prediction models need further validation in various ethnicities to ensure universal applicability.

• Nano
• /
• v.13 no.10
• /
• pp.1850121.1-1850121.11
• /
• 2018

In this study, a series of $LaMnO_3$-diamond composites with varied $LaMnO_3$ mass contents supported on micro-diamond have been synthesized using a sol-gel method. The as-prepared composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and the Fourier transform infrared spectra (FTIR). Meanwhile, the photocatalytic performances were also tested by photoluminescence (PL) spectroscopy, ultraviolet-visible diffuse reflection spectra (UV-Vis DRS) and the degradation of weak acid red C-3GN (RC-3GN). Results show that the peak position of $LaMnO_3$ is shifted to low angle after the introduction of diamond, and perovskite particles uniformly distributed on the surface of diamond, forming a network structure, which can increase the active sites and the absorption of dye molecules. When the mass ratio of $LaMnO_3$ and diamond is 1:2 (LMO-Dia-2), the composite shows the most excellent photocatalytic activity. This result offers a sample route to enlarge the range of the application of micro-diamond and provide a new carrier for perovskite photocatalysts.

• Journal of radiological science and technology
• /
• v.42 no.4
• /
• pp.285-290
• /
• 2019

Magnetic resonance imaging is a technique specialized in soft tissue imaging with high contrast resolution without in vivo ionization and has been widely used in various clinical settings. In particular, the recent increase in social stress factors has been used in the diagnosis of pituitary adenoma, the incidence increases rapidly. Recently, due to the development of magnetic resonance imaging, it is possible to diagnose micro pituitary adenoma, but despite the use of contrast medium, there has been a difficulty in diagnosing the pituitary adenoma due to its small size and noise. In order to solve this problem, a proposed method of separating signal components image and noise components image from a measured image is applied, and the improvement of diagnostic efficiency is attempted by removing noise. As a result, it was confirmed that the image quality was improved as a whole by applying SNR for 30 subjects data. It is expected that this study will be useful as a pre-processing method for improving the image quality and developing diagnostic indicators of pituitary adenoma.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.2
• /
• pp.153-162
• /
• 2021

The effects of activated carbon originated Ballasted Flocculant (BF) on the settleability of activated sludge and the recovery of BF by Hydro-cyclone (HC) were analyzed experimentally. Two kinds of BF (M-I: 125-250 ㎛, M-II: 250-425 ㎛ in dia.) and three kinds of activated sludges with different SS concentration (2,300-7,100 mg/L) were applied for this study. With the dosage variation of BF from 0.14 to 1.3 g-BF/g-SS, we could obtain 24-31% improvement in SV30 (Sludge Volume after 30min sedimentation) for the lowest SS concentration sludge (2,300 mg/L). Whereas the SV30 improvement was much higher as 44-48% for the highest SS concentration sludge (7,100 mg/L). The settling characteristics of the sludge with BF followed Vesilind model the best among three models (Vesilind, Takacs and Cho model). HC could effectively separate BF with the separation efficiency of 70-90% and over 95% separation efficiency could be obtained when the HC was applied twice.

• Journal of Surface Science and Engineering
• /
• v.56 no.5
• /
• pp.335-340
• /
• 2023

Quinary component of 3㎛ thick Ti-Al-Si-Cu-N films were deposited onto WC-Co and Si wafer substrates by using an arc ion plating(AIP) system. In this study, the influence of copper(Cu) contents on the mechanical properties and microstructure of the films were investigated. The hardness of the films with 3.1 at.% Cu addition exhibited the hardness value of above 42 GPa due to the microstructural change as well as the solid-solution hardening. The instrumental analyses revealed that the deposited film with Cu content of 3.1 at.% was a nano-composites with nano-sized crystallites (5-7 nm in dia.) and a thin layer of amorphous Si₃N₄ phase.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.4
• /
• pp.569-575
• /
• 2008

The principal objective of this study was to determine the appropriate water content for optimal texture in high omega-3 fatty acid saury nuggets. The approach adopted in this study essentially involved variations in water levels(0{\sim}25%$). The main ingredients of the nuggets included saury mince, mild pizza cheese and hydrated textured soy protein concentrate. The formulated products were molded(dia. 4.5, thickness 1.5 cm, 20 g), battered lightly, flash-fried far 4 min at $160^{\circ}C$ and frozen until they were tested. The frozen nuggets were cooked to $65^{\circ}C$, then subjected to sensory evaluation, texture analysis at 80% deformation, and expressible fluid tests. The moisture contents in the nugget batter and the cooked nuggets were determined. In our sensory evaluation, nugget texture was adjudged the best in the nuggets prepared with a 20% water level(S5). The hardness and chewiness in the nuggets were reduced with increases in the water level. However, when the nuggets contain more than 15% water(S4, S5, S6), we noted no significant differences in the hardness values. The difference in moisture content between the uncooked nugget bat or and the cooked nugget was most profound in the nugget prepared with a water level 25%(S6). The nugget prepared with a water level 25% was also the highest in expressible fluids, and was also highest in internal moisture content. The texture preference of nuggets was correlated positively with moistness(r=0.881) and moisture content(r=0.827), and correlated negatively with firmness(r=-0.870) and cohesiveness(r=-0.839), and these correlations were significant.

• The Journal of the Korean dental association
• /
• v.53 no.5
• /
• pp.368-376
• /
• 2015

Purpose : The objective of this research was to develop a more simplified drilling procedure with an enhanced implant drill. Materials and Methods : The drill enhanced design factors enabled implantation of Dia. 5.0mm fixture with only 2 times drilling which is more simplified drilling procedure. The enhanced drill was designed with 2 flutes, 2-phase or 3-phase formed drill tip and 25 degrees of helix angle. The proposed drilling procedure (2 times) was compared with a general drilling process (4 times) in terms of temperature changes, cutting time and ISQ value. Results : The simplified drilling procedure indicated less heat than a conventional drilling procedure (p<0.05). The enhanced drill showed significantly shorter drilling time than a conventional drill (p<0.05). On the other hand, higher insertion torque and ISQ value were observed on the the suggested drilling procedure than the conventional drilling procedure (p<0.05). Conclusion : A simplified drilling procedure with the newly designed drill could provide higher effectiveness and safety of dental implant operations under properly controlled external conditions, such as irrigation and RPM of drilling.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.117-125
• /
• 2018

Aims of this study was to investigate on the actual condition of contact lens wearing after corneal refractive surgery, base curves and diameters of lenses on sale, and to confirm movement of lens and wear patterns when wearing of lenses in the modified cornea. After surgery, 16.5% of the respondents had experience wearing contact lenses. Also, the mostly distributed contact lenses had B.C. 8.6mm and DIA.14.0mm. The corneas of 24 eye after corneal refractive surgery were flat, the lenses moved towards inferior and temporal when wearing the lens. After corneal refractive surgery, contact lens wear may feel uncomfortable may require the detailed description and sophisticated fitting due to the limited type of contact lens. It is thought that convergence will be necessary in the industry and clinical study of contact lenses.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.197-202
• /
• 2010

Post release mechanism is generally used to reduce the severity of the occupant of an errant vehicle impacting a roadside posts. The 820kg-50km/h head-on impact simulations were made using LS-DYNA program for the posts of 101.6mm Dia(t=4.0mm) with and without clip-type release mechanism. The simulation result was compared with impact test result to enhance the credibility of simulation model. The study shows that the high impact severity (THIV, PHD) and excessive deformation threatens the safety of the occupant when a car impacts a rigidly connected posts, while a post with clip-type slip base reduce the impact severity to a safe level.