• 제목/요약/키워드: DFA system

검색결과 27건 처리시간 0.028초

Mass Spectrometer를 바탕으로 한 전자코를 이용한 식물성 유지가 혼합된 참기름의 판별 분석 (Identification of Vegetable Oil-added Sesame Oil by a Mass Spectrometer-based Electronic Nose)

  • 손희진;홍은정;고상훈;최진영;노봉수
    • 산업식품공학
    • /
    • 제13권4호
    • /
    • pp.275-281
    • /
    • 2009
  • 참기름은 높은 항산화활성 및 항암작용 등의 우수한 영양학적 가치를 지니는 반면 비싼 가격으로 인하여 가짜 참기름의 유통이 범람하여 이를 판별할 수 있는 분석 방법의 확립이 요구되는 실정이다. 따라서 본 연구에서는 질량분석기를 바탕으로 한 전자코를 이용하여 대두유가 혼합된 참기름을 제조하여 진위 판별을 시도하기위하여 각각의 유지를 전자코를 이용하여 분석, 통계처리하였다. 혼합 참기름의 휘발성 향기성분으로부터 생성되는 ion fragment 중 40-160 amu에서 각 시료 간에 차별성이 높은 fragment (m/z)를 선택하여 해당 intensity값을 판별 분석한 결과, 참기름 및 대두유는 뚜렷하게 구분되었다. 참기름 및 대두유, 옥수수유, 들기름을 각각의 순수한 상태로 향기성분 분석을 한 결과 서로 다른 위치에서 정확하게 분리됨을 알 수 있었고, 대두유와 옥수수유의 경우 타 기름과는 달리 순수한 공기 성분과 비슷한 위치에서 확인되는 것으로 휘발성향기성분의 감응도가 상대적으로 낮은 것으로 판단된다. 미량의 대두유가 혼합된 참기름은 첨가된 대두유의 농도에 비례하여 제1판별함수값(DF1)과 높은 상관관계를 나타내었다. 참향후 참기름의 위조 여부를 검증하는 방법에 하나로 활용될 수 있을 것이다.

트레드밀을 이용한 보행간 Variability 분석에 관한 연구 (A Study on Stride-to-stride Variability by Treadmill Walking)

  • 최진승;강동원;탁계래
    • 한국운동역학회지
    • /
    • 제17권4호
    • /
    • pp.1-8
    • /
    • 2007
  • The purpose of this study was to investigate the difference in the stride-to-stride variability between two treadmill conditions; traditional treadmill and special treadmill whose speed can be adjusted automatically by subject's walking speed. Eight male subjects (25.1 years, 172.7 cm, 66.6 kg) were participated in treadmill walking experiment. First, preferred walking speed (PWS) of each subject was determined. Second, each subject performed walking experiment with fixed PWS condition and with free PWS condition for 10 minutes. 3D motion capture system (Motion analysis Corp., USA) with 6 cameras was used to collect motion data with sampling frequency of 120Hz. Temporal and spatial variables for stride-to-stride variability were calculated. Coefficient of variance (CV) which quantifies the amount of variability and Detrended Fluctuation Analysis (DFA) which explains the structure (self-similarity) of the variability were used for analysis. Results showed that the amount of variability during free PWS condition was greater than that of fixed PWS condition. DFA results showed that there was a statistical difference between two treadmill conditions for the variables of step length, stance time, and double support time. From these results, it is possible that traditional treadmill study might give incorrect conclusion about gait variability study. Further study is necessary to clarify these matters by considering the number of subjects, experimental time, and gait variables for the study of stride-to-stride variability.

철골조립자동화시스템의 설계최적화를 위한 요구성능도출에 관한 연구 (Development of Optimum Design Factor for Automated Steel Fabrication Construction System)

  • 이명도;김대원;이보형;조훈희;강경인
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2009년도 추계 학술논문 발표대회
    • /
    • pp.235-239
    • /
    • 2009
  • As robotic technologies have become more actively utilized to automate many construction tasks, they have been able to improve the construction productivity, quality, and worker's safety on site. A new advanced system, Robot-based Construction Automation (RCA) system, is currently being developed. To accomplish RCA system effectively, Design for automation (DFA) should be performed in automation system developing phase. The performance criteria of this system are a major cause of design changes. It is required exhaustive review for development new system. This research analyzed the design changes of Climbing Hydraulic Robot system and Construction Factory (CF), being currently developed in the field of applied RCA systems. And the design change matters according to performance criteria in each system's design-by-step were analyzed. The purpose of this research is developing the performance criteria in the developing phase of RCA system, and then will be served as basis for system design in similar projects.

  • PDF

자동조립을 위한 제품설계 전문가 시스템 (A Knowledge-Based Approach to Design for Assembly)

  • 김광수
    • 산업공학
    • /
    • 제4권2호
    • /
    • pp.81-92
    • /
    • 1991
  • A study showed that the two most important obstacles to assembly automation were that product designs are generally not assembly oriented and that most components cannot be handled automatically without problems. In the view of the importance of well designed product with high assemblability, a tool must be developed to pre-evaluate a product during design phase whether it can be assembled with minimum efforts. In this research, a prototype expert system for DFA has been developed that can be used to advise the designer of difficulties that his/her design presents for automatic handling during manufacture. This rule-based system has been implemented on an IBM personal computer, using the Texas Instruments' Personal Consultant Plus.

  • PDF

건축물 시공 자동화 시스템을 위한 자립형 철골 접합부의 시공성 분석 (Constructibility Analysis of Self-supported Steel Joint for Automated Construction System)

  • 김동건;양성우;김태훈;신윤석;조훈희;강경인
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
    • /
    • pp.1-4
    • /
    • 2009
  • Construction automation and robotics are being introduced as an efficient alternative to overcome troubles caused by lack of skilled labors. To accomplish effective automated construction system, design for automation(DFA) should be performed in parallel with the development of core technologies such as control and sensing of robots. In Korea, the development of robotic crane-based construction automation(RCA) system is progressing, and the research group has recently developed newly designed steel joint to improve the efficiency of the system. However, performance of the new system should be examined prior to its application on construction sites. Therefore, This study analyzed performance of the new steel frame focused on its constructibility by carrying out mock-up test. As a result, the steel frame satisfied the standards of allowable stress and deflection. It also enables to reduce the time for installation.

  • PDF

MS-전자코를 이용한 유채유의 진위 여부 판별 (Authentication of Rapeseed Oil Using an Electronic Nose Based on Mass Spectrometry)

  • 홍은정;손희진;최진영;노봉수
    • 한국식품과학회지
    • /
    • 제43권1호
    • /
    • pp.105-109
    • /
    • 2011
  • 본 연구는 유채유에 타기름이 혼합되었을 때 그 혼합 비율에 따른 차이를 전자코로 분석하였다. 대두유와 옥수수유를 0, 3, 6, 9, 12, 15, 20%를 유채유에 각각 혼입하여 전자코로 분석한 결과 DF1의 영향을 주로 받아 혼합 비율이 증가함에 따라 DF1이 음의방향으로 일정한 경향을 보이며 이동하여 나타났다. 이를 혼합비율에 따른 DF1값을 막대그래프로 나타낸 결과 혼합비율이 증가함에 따라 DF1값이 감소하여 뚜렷한 차이를 보였다. 유채유에 대두유를 혼합할 경우 DF1= $-0.170{\times}conc.$(대두유 혼합비율)+0.431 ($r^2=0.989$)과 같은 상관관계식을 얻어 유채유에 타 기름이 혼합될 경우 그 함량의 예측이 가능하였다. 이러한 결과를 통해 전자코를 이용하여 유채유의 위조판별이 가능함을 확인하였으며 다른유지를 비롯한 다양한 식품에 적용 가능할 것이다.

GC-MS와 전자코를 이용한 팔레놉시스 향기 분석 (Fragrance Analysis Using GC-MS and Electronic Nose in Phalaenopsis)

  • 박부희;예병우;김미선;이영란;박필만;이동수
    • 화훼연구
    • /
    • 제19권4호
    • /
    • pp.219-224
    • /
    • 2011
  • 팔레놉시스는 다양한 종을 가지고 있고, 강한 향기를 보유하고 있는 종들이 존재한다. 팔레놉시스 원종 중 P. bellina, P. violacea, P. schilleriana 등 소수 계통들은 향을 보유하고 있어 방향성 육종을 위한 재료로 이용된다. 본 연구는 팔레놉시스 방향성 육종을 위한 효율적인 향기 분석 시스템을 확립하고자 팔레놉시스 유전자원 8종류에 대하여 GC-MS와 전자코를 이용하여 향기 분석을 수행하였다. 팔레놉시스 '3010'에 대해서는 화기 조직별 즉 꽃받침, 꽃잎, 주두, 설판으로 나누어 분석하였다. 주된 성분비가 꽃잎과 설판 조직에서 높게 나타났다. P. bellina 계통의 주된 성분은 linalool(21.21%)이었다. 전자코를 이용하여 각 계통간 향기성분의 패턴 분석이 가능하였다. 통계 프로그램에서는 PCA 보다는 DFA 분석이 더 유용하였다. 방향성 육종 시 보유하는 육종 재료들의 주된 향기 구성성분을 알고자 GC-MS를 이용하였다. 본 연구는 향후 난의 방향성 육종을 위한 향기 분석시스템에 유용하게 활용될 것이다.

천연물에 의한 초파리수명연장 효과 (The Effect of Natural Compounds on the Longevity Extending in the Insect, Drosophila melanogaster)

  • 이정훈;권기상;이은령;유보경;고영화;최지영;권오유
    • 생명과학회지
    • /
    • 제27권1호
    • /
    • pp.95-99
    • /
    • 2017
  • 우리는 이전실험에서 배양세포를 사용하여 4종류의 천연물(Corydaline, (${\pm}$)-Car-3-ene-2,5-dione, Cinobufagin, Corilagin)이 ERAP1와 FOXO1 (DFA16) 유전자발현을 2배 이상 상승시키는 것을 증명하였다. 본 실험은 1% agar, 5% sucrose, natural compound $20{\mu}l$를 넣은 먹이를 만들어 4시간 starvation후에 4시간 동안 먹였다. Cinobufagin와 Corilagin를 먹이면 대조군에 비하여 6-8일 정도 더 생존하였다. RT-PCR 실험결과 ERAP1와 FOXO1 유전자 발현을 조절하는 것이 증명되었다. 산업곤충질병 진단과 치료에 사용될 것이며, 초파리를 대신한 생쥐에서도 동일한 결과를 실험하여 수명연장을 위한 신약으로 발전시킬 것이다.

전자코를 이용한 다양한 유형의 치즈 제품 풍미성분 분석 (Analysis of Flavor Pattern from Different Categories of Cheeses using Electronic Nose)

  • 홍은정;김기화;박인선;박승용;김상기;양해동;노봉수
    • 한국축산식품학회지
    • /
    • 제32권5호
    • /
    • pp.669-677
    • /
    • 2012
  • 본 연구는 전자코를 이용하여 한국에서 시판되는 피자용 모짜렐라 치즈 슈레드 제품과 슈레드 제품 혼합용 원료 치즈에 해당하는 모짜렐라 치즈 블록, 체다 치즈, 흰 곰팡이 숙성 치즈 등 3종류의 국내산 및 수입산 치즈를 대상으로 단기간 저장 및 가열처리에 의한 풍미패턴의 변화를 분석하였고 국내 임실치즈농협에서 새로 개발한 임실 치즈 제품이 국내산 및 수입산 치즈의 향미패턴과의 차이 유무에 대해 접근하여 보고자 하였다. 치즈 종류뿐만 아니라 조리온도 및 저장유무에 따른 향기패턴을 판별함수 분석을 이용하여 통계처리 후 비교 분석한 결과, 피자용 모짜렐라 슈레드 제품의 경우 저장유무보다는 조리온도에 따라 풍미패턴의 차이가 더 구분되었으며 피자용 모짜렐라 슈레드 제품에 혼합용으로 사용되는 치즈의 종류 및 원산지에 따라서 풍미패턴이 각각 다른 것으로 나타났다. 또한 새로 개발된 국내산 임실 치즈는 기타 국내산 치즈와 외국산 치즈와 비교하였을 때 이들의 중간 향에 해당하면서도 독특한 향미를 지니는 것으로 판별되었다.

연후(年候)에서 본 한국(韓國)의 기후(氣候) (The Climate of Korea in the View of the Climatic Year)

  • 강만석
    • 한국지역지리학회지
    • /
    • 제3권1호
    • /
    • pp.1-12
    • /
    • 1997
  • 본 연구는 전국의 64개 관측지점을 대상으로 $1972{\sim}1995$년의 자료를 해마다 $K{\ddot{o}}ppen$ 구분방법에 적용시켜 기후 특성을 고찰하였다. 우리나라의 기후는 Cfa Cwa Cwb Dfa Dwa Dwb의 연후형 으로 구성되고, Cwa Dwa형의 출현빈도가 전체의 95%를 점한다. Cwa형의 출현은 대부분의 남부 지방 동사면 제주도에서 우세하고, Dwa형은 영서 경기 복동부에서, Cfa형은 울릉도에서 탁월하게 나타난다. 이런 우세지역은 안정된 기후지역을 형성하지만 다양한 기후형이 출현하는 남부 진방의 북부와 중부 지방의 남부는 C와 D형이 상접하는 경계이므로 불안정 기후지역을 이룬다. 또한 Cwa형이 가장 우세했던 1990년대 전반기에는 C D형의 경계선이 중부 내륙 지방에 위치하였고, Dwa형이 가장 탁월했던 1980년대 전반기에는 C D형의 경계선이 남부 지방의 중위에 위치하기도 하여 해에 따라서 연후지역의 범위가 변한다. 주요 연후형의 경년변화에서 Cwa형은 증가경향을 보이지만 Dwa형은 감소추세를 나타낸다. Cwa 연후지역의 확장추세는 1970년대 전반기와 1980년대 후반기 이후 최근까지 남부 지방을 중심으로 계속되고, 1980년대 전반기에 중부지방에서 우세했던 Dwa 연후지역은 최근까지 축소되고 있다.

  • PDF