• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.286-286
• /
• 2017

자연재난은 전 세계적으로 인명 및 재산피해를 야기하고, 근래에는 기후변화로 인한 국지성 집중호우와 태풍의 발생빈도가 증가하고 있으며, 국토면적의 64%가 산지로 이루어져 있는 우리나라에서는 산지재해의 위험 가능성이 매우 높다. 이 중 토석류 재해는 붕괴된 토사가 물과 함께 섞여 높은 농도로 하류를 향해 이동하기 때문에 그 발생시점과 발생위치를 예측하기 어렵고, 토석류의 이동경로와 퇴적부 지점에 위치하고 있는 시설물 및 인명에 매우 큰 피해를 입히는 자연재해 중 하나이다. 본 연구대상지역은 충북제천시 봉양읍 공전리 일대에 위치하고 있으며, 2009년 7월 시간최대강우량 64mm, 누적강우량 455m의 집중호우로 인해 토석류가 발생하였고, 하류부에 위치한 민가와 비닐하우스, 농경지등에 피해가 발생하였다. 이에 본 연구에서는 지상LiDAR를 활용하여 고정밀도 DEM(Digital Elevation Model)을 구축하였다. 그리고 토석류 수치모형 중 미연방재난관리청(FEMA)에서 토석류 해석에 권장하고 있는 프로그램 FLO-2D모형과 일본에서 개발된 Kanako-2D모형을 적용하여 실측된 토석류 확산범위와 유출토사량을 수치모형의 결과와 비교분석하여 모형의 적용성을 검토하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.59-65
• /
• 2019

In many industries, particle packing is adopted quite frequently. In the particle packing process, the Discrete Element Method (DEM) can analyze the multi-collision of particles efficiently. Two types of contact models are frequently used for the DEM. One is the linear spring model, which has the fastest calculation time, and the other is the Hertz-Mindlin model, which is the most frequently used contact model employing the DEM. Meanwhile, very tiny particles in the micrometer order are used in modern industries. In the micro length order, surface force is important to decreased particle size. To consider the effect of surface force in this study, we performed a simulation with the Hertz-Mindlin model and added the Johnson-Kendall-Roberts (JKR) theory depicting surface force with surface energy. In addition, three contact models were compared with several parameters. As a result, it was found that the JKR model has larger residual stress than the general contact models because of the pull-off force. We also validated that surface force can influence particle behavior if the particles are small.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.937-941
• /
• 2007

For Hydrologic analysis of the river, the exact Dividing Watershed and Hydrologic-Topographical Parameters affect enormously Hydrologic analysis of the river basin. Therefore the extraction of Hydrologic-Topographical Parameters as well as Dividing Watershed are stiuied by several ways. However the definite standard of all those means are not settled. Recently GIS is applied to the field of water resources so that we can divide Watershed and calculate Hydrologic-Topographical Parameters of the targeted area easily and objective way for using DEM. Thanks to DEM, we don't have to spend much time as we did before. However other problems are generated such as the parameter value is changed by the precision of established NGIS(National Geographic Information System), etc. In this study, using GIS which is popular recently, we suggested efficient extract method of Hydrologic-Topographical Parameters SCS(Soil Conservation Service) CN(Curve Number) in watershed.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.2
• /
• pp.1-12
• /
• 2011

In order to analyze the influence of particle bonding and crushing on the characteristics of shear behavior, especially residual shear behavior of granular soil, ring shear test was simulated by using DEM(Discrete Element Method)-based software program PFC(Particle Flow Code). Total four models including two non-crushing models and two crushing models were created in this study by using clump or cluster model built in PFC. The applicability of Lobo-crushing model proposed by Lobo-Guerrero and Vallejo(2005) was investigated. In addition, the results of ring shear test were analyzed and compared with those of direct shear test. The results showed that the modelling of ring shear test should be conducted to investigate the residual shear behavior. The Lobo-crushing model cannot be applied to investigate the residual shear strength. Finally, it can be concluded that the numerical models excluding Lobo-crushing model suggested in this study can be used extensively for other studies concerning the residual shear behavior of granular soil including soil crushing.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.4
• /
• pp.5-15
• /
• 2017

Three-hinge failure occurs in a jointed rock slope with a joint set parallel with slope and a conjugate joint set. Limit Equilibrium Method (LEM) and Finite Element Method (FEM) which are commonly used for slope design, are not suitable for evaluating stability against three-hinge failure, and this study performed parametric study to analyze the failure mechanism and to find influence factors causing three-hinge failure using UDEC which is a commercial two-dimensional DEM based numerical program. Numerical analyses were performed for various joint structural conditions and joint properties as well as ground water conditions. It was found that pore water pressure is the main factor triggering the three-hinge failure and the mode of failure depends on friction angle of basal joint and bedding joint set. The results obtained from this study can be used for adequate and economic footwall slope reinforcement design and construction.

• Journal of Korea Water Resources Association
• /
• v.31 no.2
• /
• pp.199-208
• /
• 1998

This study is on the application of TOPMDEL(Topographic based hydrologic model) Which is a distributed rainfall-runoff model to the flood runoff analysis. The test area was Wichun experimental catchment site which is mountainous mid-area (Dongok, 33.63$\textrm{km}^2$ and Goro, 109,725 $\textrm{km}^2$) and being operated by the Ministry of Construction and ransporation. A three-dimensional digital elevation model(DEM) map was constructed using a physiographic map(1/25,000) and GIS software, Arc/Info, was used to the analysis of geofraphic factors. The topographic index of Dongok and Goro subcatchment was similar. As a results of the analysis, the model was validated that the simulated peak flow of a flood runoff was fit to the observed data. For the analysis of the effects of grid size, Dongok subcatchment was divided into 100,120-,240 m grid and Goro subcatchment was divided into grid and 120,200,350 m grid. It was shown that the peak flow increased in proportion to the increases of the grid size, but peak times were constant regardless of the grid size in both of the watershed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.221-230
• /
• 1997

In hydrology analysis, the result of a slope analysis for terrain have an very important effect on water quality and water quantity Recently, a slope analysis tend to use the digital elevation model rater than the traditional map sheet. But a terrain slope analysis by the digital elevation model depends on grid size of the digital elevation model. Hence the effect of a slope analysis by the digital elevation model is a important factor. In this study, therefor, in order to determine a hydrological parameter and a terrain parameter for simulation of the water quality and the hydrological property, we adapted two sample area that are the Nerin stream of the basin of the Soyang lake and a Osip stream of Samchuk, and its individual coverages are $640\;km^2$ and $33\;km^2$. Also to analyze the effect of grid size in the slope of a basin, we apply DEM changing a grid size respectively at intervals of 100 m from 100 m to 1.000m for the Nerin stream basin and at intervals of 10 m from 20 m to 300 m for the Osip stream basin.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.497-497
• /
• 2022

홍수위험지도는 홍수발생시 예방되는 침수범위와 침수깊이를 나타내는 지도로 2009년 영산강수계(237.53 km), 2016년에 섬진강수계(251.06 km) 국가하천의 홍수위험지도가 제작되었고, 2021년 영산·섬진강권역 지방하천(4521.31 km) 홍수위험지도가 제작됨으로써 영산·섬진강권역 홍수위험지도 제작이 모두 완료되었다. 홍수위험지도 제작은 GIS 범람해석, 1차원 및 2차원 수치모형으로 구분할 수 있따. GIS 범람해석은 제내지의 지형 수치표고모델(DEM) 등을 활용하여 지형자료를 구축하고, 측점별 홍수위를 이용한 홍수위 DEM을 작성한 후 각 DEM의 고도차를 계산하여 홍수범람구역을 도시하는 방법이다. 도심지 또는 주거지를 관류하는 하천에 대해서는 제방의 편안 파제를 가정하여 FLUMEN모형을 이용한 2차원 범람분석 또는 HEC-RAS모형을 이용한 1차원 범람분석 방법 적용한다. 위와 같은 분석 방법으로 도출된 침수 결과는 제방 월류 및 제방 유실 등의 극한 상황을 가정한 것으로, 2020년 섬진강 대홍수 홍수피해 침수구역과 홍수위험지도의 침수구역의 겨의 일치하는 것으로 나타났다. 즉 하천홍수로 발생할 수 있는 피해의 규모를 예측할 수 있으며, 이러한 예측정보는 방재계획 수립 및 홍수대응에 활용도가 높을 것이다. 홍수위험지도는 홍수위험지도정보시스템(www.floodmap.go.kr)에서 누구나 확인이 가능하며, 지자체 방재담당자는 회원가입을 통해 홍수위험지도 전산파일 및 보고서 등을 받을 수 있다. 방재담당자는 홍수위험지도의 침수구역을 바탕으로 대피계획을 수립하고, 집중호우로 인한 하천수위 상승 시 홍수위험지도의 침수구역을 중심으로 방재활동을 하여 인명피해를 최소화할 수 있을 것이다.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.2
• /
• pp.55-66
• /
• 2011

This paper presents the results of an investigation on the failure mechanism of geosynthetic reinforced soil walls in back-to-back configuration using 1-g reduced-scale model tests as well as discrete element method-based numerical investigation. In the 1-g reduced scale model tests, 1/10 scale back-to-back walls were constructed so that the wall can be brought to failure by its own weight and the effect of reinforcement length on the failure mechanism was investigated. In addition, a validated discrete element method-based numerical model was used to further investigate the failure mechanism of back-to-back walls with different boundary conditions. The results were then compared with the failure mechanisms defined in the FHWA design guideline.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.33-41
• /
• 2003

The large planar failure has occurred in a rock cut slope of highway construction site in Boeun. This area is considered to be unstable since the discontinuity, whose orientation is similar to the orientation of the failure plane, is observed in many areas. Therefore, several analysis techniques such as SMR, stereographic analysis, limit equilibrium, numerical analysis, which are commonly used in rock slope stability analysis, are adopted in this area. In order to analyze the stress redistribution and nonlinear displacement caused by cut, which are not able to be obtained in limit equilibrium method, DEM and shear strength reduction technique were used in this study. Then the factors of safety evaluated by shear strength reduction technique and limit equilibrium were compared. In addition, the factor of safety under fully saturated slope condition was calculated and subsequently, the effect of the reinforcement was evaluated.