• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.1
• /
• pp.1-6
• /
• 2020

This study was conducted to evaluate feed value of imported hays and examine current situation of species and hay grade. To evaluate the quality of the imported hay, 133 pieces including 9 species of roughage types were collected at the national hay importers, the TMR companies and livestock farms from 2016 to 2018. The quality grades of imported hay were 3~4 and most imported hay were considered to had low. The ADF, Ash, TDN and DDM in feed composition of alfalfa by quality grades presented significant differences(p<0.05). The quality grade on alfalfa was not similar to the actual quality grades calculated through feed composition. The feed composition of grasses by quality degrees presented significant differences in all contents except DM and CP (p<0.05). As the distributed grasses of the unmarked quality grade was low quality and accounted for 49%, it is urgent to present quality standards based on feed composition. As these results, the grades of imported hays were lower than the marked quality grades. Therefore, the imported roughage's(hay) price that considered to only quality grades on the marked imported roughages(hay) package can cause a loss to the livestock farms as economic damage. An institutional arrangement should be established to review the quality grades of imported hay.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.137-144
• /
• 2004

The objective of this experiment was to suggest the optimum N fertilization level for turf type mixtures {Kentucky bluegrass(Newport) 40% + tall fescue(Rebell Jr.) 20%. + perennial ryegrass(Palmer II) 10% + redtop(Barricuda) 10% + red fescue(Salem) 10% + creeping bentgrass(Crenshaw) 10%}. The field trials were conducted from 1998 to 2000 at Chungnam National University in order to evaluate the dry matter yield and quality on the N levels(100, 150 and 200kg/ha). With increasing the N level, the average DM yields over 2-years of turf type mixtures significantly increased. The average total DM yields were obtained 6,551, 8,182 and 9,501kg/ha at N 100, 150 and 200kg/ha level(p<0.05), respectively. CP content and DMD were increased, whereas fibrous constituents was decreased(p<0.05), but CPDM and DDM yields were significantly increased with increasing the N levels over 2-year(p<0.05). Based on the results, considering the total DM yield and the quality of herbages which were incidentally produced from turf type mixtures, it can be suggested that the suitable N level was 200kg/ha. But increased N fertilizer usage for general purpose use and expenses on turf type mixtures should be considered in advance.

• Journal of Adhesion and Interface
• /
• v.4 no.3
• /
• pp.33-40
• /
• 2003

In this work, diglycidyl ether of bisphenol A (DGEBA)/polyetherimide (PEI) blends were cured using 4,4-diaminodiphenyl methane (DDM). And the effects of addition of different PEI contents to neat DGEBA were investigated in the thermal properties and fracture toughness of the blends. The contents of contents of containing PEI were varied in 0, 2.5, 5, 7.5, and 10 phr. The cure activation energies ($E_a$) of the cured specimens were determined by Kissinger equation and the mechanical interfacial properties of the specimens were performed by critical stress intensity factor ($K_{IC}$). Also their surfaces were examined by using a scanning electron microscope (SEM) and the surface energetics of blends was determined by contact angles. As a result, $E_a$ and $K_{IC}$ showed maximum values in the 7.5 phr PEI. This result was interpreted in the increment of the network structure of DGEBA/PEI blends. Also, the surface energetics of the DGEBA/PEI blends showed a similar behavior with the results of $K_{IC}$. This was probably due to the improving of specific or polor component of the surface free energy of DGEBA/PEI blends, resulting in increasing the hydrogen bonding of the hydroxyl and imide groups of the blends.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.4
• /
• pp.345-352
• /
• 2011

Soil fertility different depend on application rate of manure and compost for many years. While each crop has different adaptability depend on soil fertility, crop and species or varieties should be chosen depending on the adaptability and productivity. These experiments were carried out to compare the five winter cereal crops for whole crop silage on growth, yield and feed value as affected by soil organic content. The rate of increase on no. of spikes at high fertile soil compared with medium fertile soil was sequently high Samhan (Oat's variety) > Cheongwoo (Wheat) > Gogu (Rye) > Youngyang (Barley) > Shinyoung (Triticale). The rate of decrease at low fertile soil compared with medium fertile soil was sequently high Youngyang > Gogu > Cheongwoo > Shinyoung > Samhan. The triticale was lower variation of no. of spikes as affected by soil organic content than that of other winter cereals. The variations of dry matter yield as affected by soil fertility was higher oat and barley and lower triticale. Forage yield of triticale was higher about 69 percent than that of barley at low fertile soil. Forage yield was the highest in triticale and the lowest in rye in all soil fertility. In high fertile soil, rate of increasing digestible dry matter (DDM) yield compared with medium fertile was high in Samhan and Youngyang. Rate of reduced DDM yield in low fertile soil compared with medium fertile was low in Shinyoung and Cheongwoo.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.822-827
• /
• 2013

In this paper, how to stop a moment to experiment with stop function, electric brake type scale model propulsion system is designed and fabricated by control of the braking torque is proposed. Scale model system for motor-driven, inertial load, the structure of the load for the motor and the inverter system was constructed with two sets of converters, the actual range of the rotational speed of the vehicle DDM experiments to be able to. In Additional, observer to estimate the rotor position and speed of using resolver, and the pole at low speed, speed detection methods have been developed. As a result of this study, first, stop the moment Second, the reduction of braking torque, and how to initiate the operation of the air brake blending by using the braking, improve braking methods that only use the electric brake to stop brought.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.775-777
• /
• 2012

차세대전동차는 직접구동모터(DDM : Direct Drive Motor) 방식으로 기존에 사용하던 기어박스를 없애는 등, 연결부품을 제거함으로써 고장률을 줄여 기존차량 대비 30% 이상 신뢰도를 향상하도록 개발하였다. 그러나, 단순히 모터 자체 만을 변경함으로써 신뢰도를 향상시켰다고 보기는 어렵고, 시스템 차원에서 전동차 내 타 구성품과의 인터페이스를 살펴보고, 정량적인 분석을 통해서 신뢰도가 어느 정도 향상되었는지 살펴볼 필요가 있다. 신규차량일 경우, 기존차량대비 어느 정도로 신뢰도가 향상되었는지를 입증하고자 주행시험을 실시하는데 전동차에 신뢰성 이론을 적용하기 위해서는 크게 목표설정, 신뢰도예측, 신뢰도입증의 3단계 작업이 진행되며, 신뢰도 예측은 주요장치를 구성하고 있는 부품단위의 고장률을 이용하여 시스템의 신뢰도를 예측하고, 신뢰도 목표치를 만족하는지를 분석하는 것이며, 신뢰도 입증은 예측한대로 시스템이 구축되었는지 확인하는 것이다. 본 논문에서는 차세대 전동차에서 설정한 목표신뢰도를 만족시키기 위해 수행한 업무에 대하여 논하고자 한다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1215-1221
• /
• 1999

Twelve rumen fistulated cross-bred calves were divided into three groups and fed wheat straw and concentrate mixture according to their maintenance requirement. Animals in group II and III were fed 50 and 100mg rumensin per day, in addition to basal feed. Supplementation of rumensin in the diet decreased the dry matter intake significantly (p<0.05) along with a significant decrease in the straw intake. Digestibility coefficients of all the nutrients were not affected significantly except that of CF digestibility which was lower (p<0.05) in groups II and III as compared to group I. Among N-parameters in the rumen fluid, mean $NH_3-N$ was significantly lower in groups II and III (19.13 and 18.63 mg N/100 ml respectively) than in group I (22.68); total-N and TCA-ppt-N did not differ among the three groups. Total VFA concentration did also not differ among the three groups, however, propionate increased from 24.33 molar % to 32.73 while acetate and butyrate decreased respectively from 65.85 to 58.81% and 9.79 to 8.46%. Total VFA, bacteria and protozoa production rates were not affected significantly due to rumensin in diet. Methane production per kg DDM as well as % of methane in total gas were reduced at both the levels of rumensin on different concentrate ratios with wheat straw as roughage. Similar trend was also observed with rice straw and concentrate mixture as substrate with rumensin addition.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.265-268
• /
• 2002

In this work, the blend system of epoxy and PMR-15 polyimide is investigated in terms of the cure behaviors and thermal stabilities. The cure behaviors are studied in DSC measurements and thermal stabilities are also carried out by TGA analysis. DDM (4, 4'-diamino diphenyl methane) is used as curing agent for EP and the content of PMR-15 is varied within 0, 5, 10, 35, and 20 phr to neat EP. As a result, the cure activation energy ($E_a$) is increased at 10 phr of PMR-15, compared with that of neat EP. From the TGA results of EP/PMR-15 blend system, the thermal stabilities based in the initial decomposed temperature (IDT) and integral procedural decomposition temperature (IPDT) are increased with increasing the PMR-15 content. The fracture toughness, measured in the context of critical stress intensity factor ($K_{IC}$) and critical strain energy release rate ($G_{IC}$), shows a similar behavior with $E_a$. This result is probably due to the crosslinking developed by the interactions between intermolecules in the polymer chains.

• Structural Engineering and Mechanics
• /
• v.27 no.6
• /
• pp.741-771
• /
• 2007

Tests were conducted on two partially pre-stressed concrete solid beams subjected to combined loading of bending, shear and torsion. The beams were designed using the Direct Design Method which is based on the Lower Bound Theorem of the Theory of Plasticity. Both beams were of $300{\times}300mm$ cross-section and 3.8 m length. The two main variables studied were the ratio of the maximum shear stress due to the twisting moment, to the shear stress arising from the shear force, which was varied between 0.69 and 3.04, and the ratio of the maximum twisting moment to the maximum bending moment which was varied between 0.26 and 1.19. The required reinforcement from the Direct Design Method was compared with requirements from the ACI and the BSI codes. It was found that, in the case of bending dominance, the required longitudinal reinforcements from all methods were close to each other while the BSI required much larger transverse reinforcement. In the case of torsion dominance, the BSI method required much larger longitudinal and transverse reinforcement than the both the ACI and the DDM methods. The difference in the transverse reinforcement is more pronounce. Experimental investigation showed good agreement between design and experimental failure loads of the beams designed using the Direct Design Method. Both beams failed within an acceptable range of the design loads and underwent ductile behaviour up to failure. The results indicate that the Direct Design Method can be successfully used to design partially prestressed concrete solid beams which cater for the combined effect of bending, shear and torsion loads.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.834-837
• /
• 2002

The effect of undecorticated sunflower cake (USFC) as critical protein supplement was assessed and compared with deoiled groundnut cake (DGNC) in adult goats and sheep. The animals were fed a basal diet of wheat straw ad libitum and supplemented with either USFC or DGNC to meet their protein requirement for maintenance. Total dry-matter intake by sheep and goats (g/kg $BW^{0.75}$) on USFC was similar to their counterparts on DGNC supplemented group. However, while intake of cake moiety was significantly (p<0.05) higher in USFC, the intake of wheat straw was significantly (p<0.05) higher by animals on DGNC. Digestibility of various nutrients, except lower crude protein digestibility by goats in USFC group, did not differ significantly between animals given DGNC or USFC. DCP and TDN concentration (% DM) was comparable in sheep and goats irrespective of dietary supplement. Similarly, the intake (g/kg $W^{0.75}$) of DCP, DDM, DOM, and TDN was similar between DGNC and USFC in both sheep and goats. It may be concluded that undecorticated sunflower cake is comparable to deoiled groundnut cake as a critical protein supplement to the roughage based diet of small ruminants.