• Title/Summary/Keyword: DCF Throughput

Search Result 84, Processing Time 0.024 seconds

Analytical Model of Isochronous MAC Protocol for MANET (모바일 애드혹 네트워크를 위한 Isochronous MAC 프로토콜의 분석적 모델 연구)

  • Heo, Ung;Choi, Jae-Ho
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.45 no.2
    • /
    • pp.111-118
    • /
    • 2008
  • In this paper a novel medium access control mechanism is investigated as a means to support real-time services. The primary goal is to provide constant-bit-rate voice call services to pairs of autonomous mobile nodes operating in ad hoc networks. Here, a time-slot reservation based MAC is considered to provide real-time voice calls and a new MAC called the time-slot reservation coordination function(TRCF) is presented. In addition to this isochronous type MAC protocol development, the proposed protocol is modeled using a Markov chain in order to predict its behavior. The performance of TRCF is analytically derived and the performance measures such as average wait time taken for a call connection and throughput are obtained.

An Analysis for the Efficient Dissemination of Beacon Messages in Vehicle-to-Vehicle (V2V) Communications (자동차 간 통신에서 비컨 메시지의 효율적인 방송을 위한 성능 분석)

  • Nguyen, Hoa-Hung;Bhawiyuga, Adhitya;Jeong, Han-You
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.37 no.6C
    • /
    • pp.483-491
    • /
    • 2012
  • In vehicle-to-vehicle (V2V) communications, each vehicle should periodically disseminate a beacon message including the kinematics information, such as position, speed, steering, etc., so that a neighbor vehicle can better perceive and predict the movement of the vehicle. However, a simple broadcasting of such messages may lead to a low reception probability as well as an excessive delay. In this paper, we attempt to analyze the impact of the following key parameters of the beacon dissemination on the performance of vehicular networks: beacon period, carrier-sensing range, and contention window (CW) size. We first derive a beacon period which is inversely proportional to the vehicle speed. Next, we mathematically formulate the maximum beacon load to demonstrate the necessity of the transmit power control. We finally present an approximate closed-form solution of the optimal CW size that leads to the maximum throughput of beacon messages in vehicular networks.

A Multi-Rate Aware Distributed Packet Scheduling in Ad-hoc Networks (에드혹 네트워크에서 다중 데이터률을 고려하는 분산 패킷 스케쥴링)

  • Roh Kwen-Mun;Chen Yong-Qian;Yoo Sang-Jo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.7B
    • /
    • pp.642-651
    • /
    • 2006
  • In ad-hoc network, the most of existing packet scheduling schemes provides throughput-based fairness. To provide throughput-based fairness, it basically supposes that the channel capacity is fixed. But, the supposing that the channel capacity is fixed is not appropriate because IEEE 802.11b and 802.11g which are normally used for organizing ad-hoc network can provide various data rate according to channel conditions. So, we define time-based fairness for each flow to consider multi-rate and suggest the MRADPS reaching the defined time-based fairness. Simulation result shows that MRADPS improves the total network throughput in ad-hoc network with providing time-based fairness to each flow.

Modeling End-to-End Throughput of Multiple Flows and Efficient Route Selection in Wireless Mesh Networks (무선 메쉬 네트워크에서의 다중 트래픽 흐름을 위한 종단간 처리량 모델링 및 효율적인 라우팅 경로 선택 기법)

  • Wang, Xiaofei;Kwon, Ted Tae-Kyoung;Choi, Yang-Hee
    • Journal of KIISE:Information Networking
    • /
    • v.37 no.4
    • /
    • pp.272-283
    • /
    • 2010
  • Wireless Mesh Networks (WMNs) have gained a lot of attention recently. Based on the characteristic of WMNs as a highly connected wireless infrastructure, many efforts from research organizations are made in order to improve the performance of the flow throughput in WMNs. Therefore, it is very critical issue to establish efficient routing paths for multiple concurrent ongoing flows. In this paper, we propose a general modeling methodology to analyze the end-to-end throughput of multiple concurrent flows by analytical calculation taking into account the carrier sensing behaviors, interference and the IEEE 802.11 Distributed Coordination Function mechanism. After the comparison of the average service time for each successful transmission at each node, we analyze the bottlenecks of flows, and hence obtain the maximum end-to-end throughput of them. By using our proposed model, it is possible to predicate the throughput of several candidate routing paths for multiple concurrent ongoing data flows, so we can select the most efficient route that can achieve the highest throughput. We carry out simulations with various traffic patterns of multiple flows in WMNs to validate our modeling and our efficient route selection mechanism.

Analytical Modeling of TCP Dynamics in Infrastructure-Based IEEE 802.11 WLANs

  • Yu, Jeong-Gyun;Choi, Sung-Hyun;Qiao, Daji
    • Journal of Communications and Networks
    • /
    • v.11 no.5
    • /
    • pp.518-528
    • /
    • 2009
  • IEEE 802.11 wireless local area network (WLAN) has become the prevailing solution for wireless Internet access while transport control protocol (TCP) is the dominant transport-layer protocol in the Internet. It is known that, in an infrastructure-based WLAN with multiple stations carrying long-lived TCP flows, the number of TCP stations that are actively contending to access the wireless channel remains very small. Hence, the aggregate TCP throughput is basically independent of the total number of TCP stations. This phenomenon is due to the closed-loop nature of TCP flow control and the bottleneck downlink (i.e., access point-to-station) transmissions in infrastructure-based WLANs. In this paper, we develop a comprehensive analytical model to study TCP dynamics in infrastructure-based 802.11 WLANs. We calculate the average number of active TCP stations and the aggregate TCP throughput using our model for given total number of TCP stations and the maximum TCP receive window size. We find out that the default minimum contention window sizes specified in the standards (i.e., 31 and 15 for 802.11b and 802.11a, respectively) are not optimal in terms of TCP throughput maximization. Via ns-2 simulation, we verify the correctness of our analytical model and study the effects of some of the simplifying assumptions employed in the model. Simulation results show that our model is reasonably accurate, particularly when the wireline delay is small and/or the packet loss rate is low.

Distributed Collision-Resolvable Medium Access Control for Wireless LANs with Interference Cancellation Support

  • Shen, Hu;Lv, Shaohe;Wang, Xiaodong;Zhou, Xingming
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.8 no.8
    • /
    • pp.2691-2707
    • /
    • 2014
  • Medium access control is critical in wireless networks for efficient spectrum utilization. In this paper, we introduce a novel collision resolution method based on the technique of known interference cancellation, and propose a new MAC protocol named as CR-MAC, in which AP tries to decode all the collided data packets by combining partial retransmissions and known interference cancellation. As the collided transmissions are fully utilized, less retransmission is required, especially in a crowded network. The NS-2simulation and MATLAB numerical results show that, under various network settings, CR-MAC performs much better than the IEEE 802.11 DCF in terms of the aggregation throughput and the expected packet delay.

Maximizing Differentiated Throughput in IEEE 802.11e Wireless LANs (IEEE 802.11e 무선LAN의 차별화된 성능강화기법)

  • Yoon, Jong-Won;Yun, Sang-Ki;Kim, Hyo-Gon;Ko, Jeong-Gil
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2006.10d
    • /
    • pp.34-39
    • /
    • 2006
  • IEEE 802.11e 무선LAN 매체접근제어(MAC) 통신규약의 분산조정함수(DCF)의 성능은 경쟁노드수가 증가할수록 급격히 떨어진다. 이러한 문제점을 해결하기 위해서 채널의 유휴슬롯시간(Idle Time)을 측정해서 최소 경쟁윈도($CW_{min}$)를 조절하는 방식이 제시되었다. 이러한 방식을 각 부류별로 서비스 품질이 보장되는 IEEE 802.11e 네트워크로 확장하여 성능을 최대화하는 기법을 이 논문에서 다루겠다. 각 부류별로 서비스품질은 유지하면서 네트워크 전체의 성능을 높일 수 있는 최적의 경쟁윈도 크기를 찾아내는 기법을 보이도록 하겠다.

  • PDF

Maximum End-to-end Throughput of Chain-topology Wireless Mesh Networks (선형 토폴로지 무선메쉬네트워크의 종단간 최대 가능 전송률)

  • Yoo, Jae-Yong;Kim, Jong-Won
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2006.10d
    • /
    • pp.232-235
    • /
    • 2006
  • 일반적으로 선형 토폴로지 (chain topology) 무선메쉬네트워크의 종단간 최대 전송률은 경쟁관계 그래프 (contention graph)에 기반하여 트래픽 병목 구간의 노드 개수와 1 홉 링크의 평균 전송률을 결정하여 계산하는 방식이 널리 이용된다. 본 논문은 평균을 이용한 방법은 IEEE 802.11 DCF (Distributed Coordination Function)를 MAC 프로토콜로서 사용하는 무선메쉬네트워크에서 정확성에 한계가 있음을 보이며, 이와 같은 정확성의 한계를 유도하는 인자로서 전송률의 편차를 소개한다. 또한 전송률 편차를 고려하여, 단일 선형 토폴로지에서 종단간 최대 전송률을 구하는 방법을 ns2 시뮬레이션을 통해 검증한다.

  • PDF

Performance Analysis and evaluation of the IEEE 802.11e EDCF (IEEE 802.11e EDCF 성능 분석과 평가)

  • Kim Jong Deok
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.12A
    • /
    • pp.1356-1366
    • /
    • 2004
  • Recently, the IEEE 802.11 working group has announced a new distributed MAC called EDCF to provide service differentiation among traffic classes. With the increasing demand for supporting Quality of Service in IEEE 802.11 wireless LANs, the EDCF is now attracting many researchers' attention due to its practical worth as a standard mechanism. In this paper, we focus on the analytical approach to evaluate the performance of the EDCF. An analytical model is developed to estimate the throughput of the EDCF in saturation (asymptotic) conditions. Extensive simulation studies have been carried out for the validation of the analysis, and they show that it estimates the throughput of the EDCF accurately By utilizing the analytical model, we evaluate the performance of the EDCF. Specifically, we concentrate on discovering the characteristics of the EDCF Parameters, such as CW/Sub min/, CW/Sub max/ and AIFS, in the way that they influence on the performance of the EDCF.

A Reactive Cross Collision Exclusionary Backoff Algorithm in IEEE 802.11 Network

  • Pudasaini, Subodh;Chang, Yu-Sun;Shin, Seok-Joo
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.4 no.6
    • /
    • pp.1098-1115
    • /
    • 2010
  • An inseparable challenge associated with every random access network is the design of an efficient Collision Resolution Algorithm (CRA), since collisions cannot be completely avoided in such network. To maximize the collision resolution efficiency of a popular CRA, namely Binary Exponential Backoff (BEB), we propose a reactive backoff algorithm. The proposed backoff algorithm is reactive in the sense that it updates the contention window based on the previously selected backoff value in the failed contention stage to avoid a typical type of collision, referred as cross-collision. Cross-collision would occur if the contention slot pointed by the currently selected backoff value appeared to be present in the overlapped portion of the adjacent (the previous and the current) windows. The proposed reactive algorithm contributes to significant performance improvements in the network since it offers a supplementary feature of Cross Collision Exclusion (XCE) and also retains the legacy collision mitigation features. We formulate a Markovian model to emulate the characteristics of the proposed algorithm. Based on the solution of the model, we then estimate the throughput and delay performances of WLAN following the signaling mechanisms of the Distributed Coordination Function (DCF) considering IEEE 802.11b system parameters. We validate the accuracy of the analytical performance estimation framework by comparing the analytically obtained results with the results that we obtain from the simulation experiments performed in ns-2. Through the rigorous analysis, based on the validated model, we show that the proposed reactive cross collision exclusionary backoff algorithm significantly enhances the throughput and reduces the average packet delay in the network.