• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.128.1-128
• /
• 2003

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.45-47
• /
• 2001

Jeju island is composed mainly of volcanic rocks such as basalts, trachytic andesites, tracytes, and sedimentary rocks. About 80% of Jeju soils are classified as Andisols. The amount of annual precipitation in Jeju island is about 1872mm, which is 1.5 times the annual precipitation of south Korea. There is a significant difference In amount of precipitation with regions even within Jeju island. In study area, the annual amount of rainfall is about 1280mm, the lowest in Jeju island while south part of the island has the annual precipitation of 2056mm, though they are only tens of kilometers apart. The parent materials of soils in study area are pyroclastic rocks and tuffs. The soils of non-andic properties have developed in this area since pedogenic process of pyroclastic materials is strongly influenced by climatic factor, especially precipitation. In order to investigate the mineralogical characteristics of soils, X-ray analysis for <0.2 and 2-0.2$\mu\textrm{m}$ size fractions was performed with ethylene glycol solvation, K-, Mg-saturation, heat treatment(110, 330, 550$^{\circ}C$). Acid-oxalate and DCB(sodium hydrosulfite, sodium citrate, sodium bicarbonate) dissolution method was used to assess tile total amounts or Al, si, and hydroxy interlayer or 2:1 layer silicates. XRD was also applied for samples treated with DCB only and DCB-oxalate sequentially. XRD patterns showed that 2:1 and 1:1 layer silicates were found, which are different from soils of Andisols. Vermiculite, chlorite, hydroxy interlayered minreals, and interstratified minerals(vermiculite/chlorite) were observed in 2-0.2$\mu\textrm{m}$ size fractions. After DCB treatments, ethylene glycolated samples with Mg-saturation showed expanded d-spacing, suggesting the possibility of hydroxy interlayered minerals. The amounts of hydroxy interlayered minerals increased in surface soil. Unlike Andisols, short range ordered minerals such as allophane, imogolite and gibbsite were hardly found. Mica and kaolinte existed in small amounts. Results are summarized in Fig 1 and Fig. 2.

• Herbal Formula Science
• /
• v.13 no.2
• /
• pp.41-57
• /
• 2005

This study has been carried out to understand the effect of Danchisoyosangagambang (DC) on the hyperglycemic mice induced with streptozotocin(STZ). Experimental groups were made diabetic mice by intraperitoneal injection of STZ(60 mg/kg of body weight) tw ice by 24 h interval and then 120 mg/kg STZ was injected again 3 days after the earlier treatment. Control group was administered mice with 0.9 % saline(2 mL/kg), and experim ental groups were administered DC extract(DCA group, 10 mg/kg/day; DCB group, 30 mg/kg/day) after hyperglycemic induction for 6 weeks. The body weight of experimental groups was lower than control. The blood glucose concentration increased continuously, rea ching to 298.9 mg/dL after 6 weeks, however, experimental groups of the DCA and DCB groups significantly(p<0.0l) decreased in the 4, 5, and 6 weeks groups. Blood glucose tolerance test was not significant between control and experimental groups. We examined the blood transaminase activities to know the effect of herbal medicine on liver function. The GOT activities were lower in group DCB than in control. The GPT activities were lower in group DCA and DCB than in control. The content of triglyceride was significantly increased in group DCA compared to control. The SOD and catalase activities were higher in the group DCA compared to control. The results of immunohistochemical study, a few of insulin positive cells observed in the control and experimental group. These results suggest that administration of DC extract to the hyperglycemic mice decreased the blood glucose level.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.522-526
• /
• 2009

The catalytic oxidation of 1,2-dichloribenzene (1,2-DCB) and simultaneous catalytic reduction of nitrogen oxides over the single catalyst has been investigated over various metals (Ru, Mn, Co and Fe) supported on $Al_2O_3$ and $CeO_{2}$. The activity of the different catalysts for catalytic oxidation of 1,2-dichloribenzene depended on the used metal, Ru/Co/$Al_2O_3$, Mn-Fe/CeO2 and Cr/$Al_2O_3$ (commercial catalysts) being the most actives ones. In the catalytic oxidation of chlorobenzene (CB), Ru/Co/$Al_2O_3$ is better than Pt-Pd/$Al_2O_3$, which is the well-known catalyst good for VOC oxidation. Furthermore, it has a good durability on the deactivation by $Cl_2$ and sulfur. For nitrogen oxides (NOx) removal, NOx conversion was 70% at $260^{\circ}C$.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.39-46
• /
• 2021

The quantitative measurement of interfacial adhesion energy (Gc) of multilayer thin films for Cu interconnects was investigated using a double cantilever beam (DCB) and 4-point bending (4-PB) test. In the case of a sample with Ta diffusion barrier applied, all Gc values measured by the DCB and 4-PB tests were higher than 5 J/㎡, which is the minimum criterion for Cu/low-k integration without delamination. However, in the case of the Ta/Cu sample, measured Gc value of the DCB test was lower than 5 J/㎡. All Gc values measured by the 4-PB test were higher than those of the DCB test. Measured Gc values increase with increasing phase angle, that is, 4-PB test higher than DCB test due to increasing plastic energy dissipation and roughness-related shielding effects, which matches well interfacial fracture mechanics theory. As a result of the 4-PB test, Ta/Cu and Cu/Ta interfaces measured Gc values were higher than 5 J/㎡, suggesting that Ta is considered to be applicable as a diffusion barrier and a capping layer for Cu interconnects. The 4-PB test method is recommended for quantitative adhesion energy measurement of the Cu interconnect interface because the thermal stress due to the difference in coefficient of thermal expansion and the delamination due to chemical mechanical polishing have a large effect of the mixing mode including shear stress.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.3
• /
• pp.47-53
• /
• 2001

This paper investigates the characteristics of interlaminar fracture toughness of foam core sandwich structures under opening mode by using the double cantilever beam (DCB) specimens which are Carbon/Epoxy and foam core composites. Instead of using a DCB specimen of symmetric geometry, a non-symmetric DCB specimen was used to calculate the interlaminar fracture toughness. Three approaches for calculating the energy release rate(G$\sub$IC/) were used and fracture toughness of foam core sandwich structures made by autoclave, vacuum bagging and hotpress were compared. Experiment, analysis using nonlinear beam bending theory, and numerical work by FEM methods were performed. Bonding surface compensation and equivalent moment of inertia were used to calculate the energy release rate in nonlinear analytical work. Conclusions of experimental, nonlinear analytical and FEM methods were compared. It is, also, shown that the vacuum bagging forming can substitute the method of autoclave without serious loss of Mode I energy release rate(G$\sub$I/).

• Journal of Environmental Science International
• /
• v.4 no.3
• /
• pp.97-97
• /
• 1995

PCBs have been measured using GC-ECD, GC-MS, GC-ELCD, HPLC, TLC, NMR and Immunoassay. The analysis of PCBs using GC-ECD include the peak pattern method as none derivatization and the Perchlorination method as derivatization. This study was conducted to establish the perchlorination method with Sbcls from PCBs to decachlorinated biphenyl(DCB). The aroclor 1242 of PCBs was chlorinated and then, converted into the DCB which showed a single peak in GC-ECD chromatogram. The detection limit of DCB was 2pg. The quantification detection concentration of PCBs extracted with soxhlet was 0.5ng/g in the soil. PCBs were not detected in the suburban soil, but 174ng/g in the soil of industrial complex. Mean PCBs concentration of Shinchun stream at Kumho river and Jinchun stream at Nakdong river was calculated average 낙ngjg in 각e sediment. PCBs concentration in the sediment of Kumho river near 2-7km from conjunction with Nakdong river was average 154ng/g. PCBs concentration in the sediment of Nakdong river near conjunction with Kumho river was average 159ng/g.

• Journal of Environmental Science International
• /
• v.4 no.3
• /
• pp.249-258
• /
• 1995

PCBs have been measured using GC-ECD, GC-MS, GC-ELCD, HPLC, TLC, NMR and Immunoassay. The analysis of PCBs using GC-ECD include the peak pattern method as none derivatization and the Perchlorination method as derivatization. This study was conducted to establish the perchlorination method with Sbcls from PCBs to decachlorinated biphenyl(DCB). The aroclor 1242 of PCBs was chlorinated and then, converted into the DCB which showed a single peak in GC-ECD chromatogram. The detection limit of DCB was 2pg. The quantification detection concentration of PCBs extracted with soxhlet was 0.5ng/g in the soil. PCBs were not detected in the suburban soil, but 174ng/g in the soil of industrial complex. Mean PCBs concentration of Shinchun stream at Kumho river and Jinchun stream at Nakdong river was calculated average 낙ngjg in 각e sediment. PCBs concentration in the sediment of Kumho river near 2-7km from conjunction with Nakdong river was average 154ng/g. PCBs concentration in the sediment of Nakdong river near conjunction with Kumho river was average 159ng/g.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.81-86
• /
• 2000

This paper was carried out to investigate the characteristics of interlaminar fracture toughness of foam core sandwich structures under opening loading mode by using the double cantilever beam (DCB) specimens in Carbon/Epoxy and foam core composites. instead of using symmetric geometry of DCB specimen non-symmetric DCB specimen was used to calculate the interlaminar fracture toughness. Three approaches for calculating the energy release rate({{{{ {G }_{IC } }}}}) were compared. Fracture toughness of foam core sandwich structures by autoclave vacuum bagging and hotpress were compared and analyzed. Experiment nonlinear beam bending FEM method were performed. Suggested bonding surface compensation and equivalent area inertia moment was used to calculate the energy release rate in nonlinear analytical results. The conclusions among experimental nonlinear analytical and FEM results was observed. The vacuum bagging method was shown to be able to substitute method in stead of autoclave without serious loss of Mode I energy release rate({{{{ {G }_{IC }}}}}) to be able to substitute method in stead of autoclave without serious loss of Mode I energy release rate({{{{ {G }_{IC }}}}}).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.4
• /
• pp.127-134
• /
• 2021

In this study, the adhesive fracturing characteristics of a DCB specimen due to single and heterogeneous bonding materials under tearing load was investigated. The experiments were conducted to examine the fracturing properties of the adhesive DCB specimen. As an experimental condition, a forced displacement of 3mm/min was applied to one side while the other side was fixed. As a result of the experiment, it was found that the AL6061-T6 material was superior to the CFRP material in terms of maximum stress, specific strength, and energy release rate when compared to the adhesive fracturing property of a single material. We tested CFRP-AL, a heterogeneous bonding material, and compared its experimental results to the results from the single materials. Based on these results, CFRP-AL with a heterogeneous bonding material was observed to have the superior structural safety compared to single materials for the mode III fracture type.