• 제목/요약/키워드: DC platform

검색결과 68건 처리시간 0.03초

Nanotube shape on the Ti-29Nb-xHf alloys with applied potentials

  • Park, Seon-Yeong;Choe, Han-Cheol
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2016년도 추계학술대회 논문집
    • /
    • pp.119-119
    • /
    • 2016
  • Over the last years the anodic formation of ordered $TiO_2$ nanotube layers has created significant scientific interest. Titanium oxide nanotube formation on the titanium or titanium alloy surface is expected to be important to improve cell adhesion and proliferation under clinical conditions. It should be possible to control the nanotube size and morphology for biomedical implant use by controlling the applied voltage, alloying element, current density, anodization time, and electrolyte. $TiO_2$ nanotubes show excellent biocompatibility, and the open volume in the tubes may be exploited as a drug release platform and so on. Therefore, in this study, Nanotube shape on the Ti-29Nb-xHf alloys with applied potentials was reserched. $TiO_2$ nanotube formation on Ti-29Nb-xHf alloys was carried out using anodization technique as a function of applied DC potential (10 V to 30 V and 30 V to 10 V) and anodization time for 60~120 min in $1MH_3PO_4$ with small additions of (0.8 wt. %, to 1.2 wt. %) NaF. The morphology change of anodized Ti-29Nb-xHf alloys was determined by FE-SEM, XRD, and EDS.

  • PDF

마이크로포지셔닝 병렬평행기구의 개발 및 실험 (Development and Experiment of a Micropositioning Parallel Manipulator)

  • 차영엽;윤권하
    • 제어로봇시스템학회논문지
    • /
    • 제15권5호
    • /
    • pp.543-547
    • /
    • 2009
  • This paper describes the design, simulation, development, and experiment of a six degree-of-freedom micropositioning parallel manipulator. A movable stage was supported with six links, each of which extends with a dc-servo micropositioning actuator. In case of parallel manipulator, while the solution of the inverse kinematics is easily found by the vectors of the links which are composed of the joint coordinates in base and platform, but forward kinematic is not easily solved because of the nonlinearity and complexity of the parallel manipulator's kinematic output equation with the multi-solutions. The movable range of the prototype was ${\pm}25mm$ in the x- and y-directions and ${\pm}12.5mm$ in the z-direction. The minimum incremental motion of the prototype was $1{\mu}m$ in the x- and y-directions and $0.5{\mu}m$ in the z-direction. The repeatability of the prototype was ${\pm}2{\mu}m$ in the x- and y-directions and ${\pm}1{\mu}m$ in the z-direction. The motion performance was also evaluated by not only the computer simulation of CAD model but also the experiment using a capacitive sensor system.

통신탑재체와 소프트웨어 위성버스체를 통합한 HITL 시뮬레이터의 설계 및 구현 (DESIGN AND IMPLEMENTATION OF HITL SIMULATOR COUPLEING COMMUNICATIONS PAYLOAD AND SOFTWARE SPACECRAFT BUS)

  • 김인준;최완식
    • Journal of Astronomy and Space Sciences
    • /
    • 제20권4호
    • /
    • pp.339-350
    • /
    • 2003
  • 국가우주개발 중장기 계획의 일환으로 "통신방송위성(CBS: Communications and Broadcasting Satellite) 탑재체 개발 사업"이 한국전자통신연구원을 중심으로 국내산업체와 공동으로 추진되었다. 통신탑재체는 Ku대역 및 Ka대역 통신중계기와 안테나로 구성되며, 2000년 5월부터 2003년 4월까지 3년 동안 기술검증모델 탑재체가 개발되었다. 본 사업에서 통신방송위성을 위한 위성버스체는 개발되지 않으므로 위성을 이루는 통신탑재체와 버스체의 구성이 완벽하지 않았다. 이러한 문제를 해결하기 위해 위성버스체를 대신할 소프트웨어 위성시뮬레이터의 개발이 요구되었다. 개발에 적용된 위성버스체는 무궁화위성 버스체를 그 대상 모델로 가정하였다. 독립적으로 존재하는 하드웨어 통신탑재체와 소프트웨어 위성시뮬레이터의 연동은 통신탑재체의 기능 시험 및 검증을 목적으로 개발된 전기적 지상시험장치(EGSE: Electrical Ground Support Equipment)의 전력, 원격명령 및 원격측정 시스템(PCTS: Power, Command and Telemetry System)을 통해 이루어지도록 설계되었다. 이러한 시스템 개발을 통해 하드웨어 통신탑재체와 실시간으로 연동되는 Hardware-in-the-loop(HITL) 통신방송위성 시뮬레이터(CBSSIM: CBS Simulator)를 구현하였다. CBSSIM의 위성버스체 모델은 모멘텀 바이어스 삼축 안정화 방식의 정지궤도 위성이고, CBSSIM은 PCTS와 TCP/IP로 연결되고, 통신탑재체는 DC하니스 및 MIL-STD-1553B로 PCTS와 연결된다. CBSSIM은 실시간 처리부을 통해 통신탑재체와 위성버스체 모델로 원격명령을 전송하며, 통신중계기로부터 실제 원격측정 자료와 위성버스체 모델로부터 생성된 원격측정 자료를 수집한다. CBSSIM은 다양한 그래픽 사용자 인터페이스(GUI: Graphic User Interface)를 통해 위성의 상태를 감시할 수 있으며, 통신위성의 발사 전후 및 궤도 운용시의 상태를 모사할 수 있다. 본 논문에서는 객체지향 기법에 의해 위성버스체를 모사한 CBSSIM과 통신탑재체 및 통신탑재체와 CBSSIM을 연동시키는 PCTS를 포함한 HITL시뮬레이터의 설계 및 구현 내용에 관해 기술한다.에 관해 기술한다.

MDA-SMAC: An Energy-Efficient Improved SMAC Protocol for Wireless Sensor Networks

  • Xu, Donghong;Wang, Ke
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권10호
    • /
    • pp.4754-4773
    • /
    • 2018
  • In sensor medium access control (SMAC) protocol, sensor nodes can only access the channel in the scheduling and listening period. However, this fixed working method may generate data latency and high conflict. To solve those problems, scheduling duty in the original SMAC protocol is divided into multiple small scheduling duties (micro duty MD). By applying different micro-dispersed contention channel, sensor nodes can reduce the collision probability of the data and thereby save energy. Based on the given micro-duty, this paper presents an adaptive duty cycle (DC) and back-off algorithm, aiming at detecting the fixed duty cycle in SMAC protocol. According to the given buffer queue length, sensor nodes dynamically change the duty cycle. In the context of low duty cycle and low flow, fair binary exponential back-off (F-BEB) algorithm is applied to reduce data latency. In the context of high duty cycle and high flow, capture avoidance binary exponential back-off (CA-BEB) algorithm is used to further reduce the conflict probability for saving energy consumption. Based on the above two contexts, we propose an improved SMAC protocol, micro duty adaptive SMAC protocol (MDA-SMAC). Comparing the performance between MDA-SMAC protocol and SMAC protocol on the NS-2 simulation platform, the results show that, MDA-SMAC protocol performs better in terms of energy consumption, latency and effective throughput than SMAC protocol, especially in the condition of more crowded network traffic and more sensor nodes.

자율 모듈 제어 로봇시스템에 관한 연구 (A Study on Automatic Module Control Robot System)

  • 이정익
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2010년도 춘계학술발표논문집 2부
    • /
    • pp.610-613
    • /
    • 2010
  • 본 과제를 통하여 기술적으로는 로봇 개발에 있어 기존 기술을 최대한 활용하고 새로운 기능을 추가하는 형태로 발전해 갈 수 있도록, 각 요소별 기능을 표준화 모듈화 하여 새로운 제품의 개발이 손쉽게 이루어 질 수 있는 기본 platform으로의 역할이 가능해졌다. 구동부 제작 및 설계, 금형 비용 등을 절감하기 위한 다목적 완구로봇 플랫폼을 확보할 수 있었다. 로봇이 복잡한 환경을 인식하고, 자율적으로 작업을 수행하며, 예측하지 못한 문제에 적절한 대처를 할 수 있도록 하기 위한 핵심 기술을 제공하게 될 것으로 생각된다. 로봇 개발에 있어 전문지식이 없는 초보자들이 직접 제작 구동해 볼 수 있는 비주얼한 개발환경을 지원할 뿐만 아니라 GUI 개발환경 및 TEXT Programming 으로 상호 전환이 가능한 코딩 방법을 지원(MSRS와의 차별화를 시도하였다. 기존 하드웨어 지식과 소프트웨어지식이 없는 상태에서도 제작자의 창의력에 따라 다양한 형태의 로봇을 제작 적용이 용의 하며 초보자들에 대한 로봇개발에 흥미를 유발할 수 있도록 하였다. 고급사용자를 위한 별도의 다운로딩 포트를 제공하였다. 로봇공학의 기본지식을 습득(아날로그/디지털 회로를 이해하고, 각종 센서의 이해하며, 스템/서보/DC모터의 제어기술, 펌웨어개발능력, 기본수준의 소프트웨어개발 능력) 활용할 수 있다. 또한, 경제 및 산업적 측면으로는 다음과 같은 장점이 있다. 기존 기술들의 장점을 취합하여 추가적인 기술을 적용할 수 있는 Base형태의 로봇을 개발할 경우 이를 활용한 제품 개발 및 Base자체로도 충분한 시장을 형성 할 수 있을 것으로 기대된다. 인터넷기반 로봇 제어 기술의 확보로 로봇시스템의 생산비용을 낮추고 TTM (Time-to-Market) 제약을 해결시켜 준다. 다른 응용 시스템에 쉽게 적용이 가능하고 지식기반 로봇 서비스의 요소기술 개발은 멀티미디어 콘텐츠분야(교육/게임/오락 등)의 활성화가 가능하기 때문에 타 IT산업에의 파급효과가 예상된다. B2B를 통한 실질적인 판매를 통한 동종기업의 연구 개발비 및 개발 기간의 단축이 예상된다.

  • PDF

경두개직류자극 유뮤에 따른 골프 퍼팅 수행력 비교 분석 (Comparison of Golf Putting Performance on Transcranial Direct Current Stimulation)

  • 이재우;박준성
    • 한국응용과학기술학회지
    • /
    • 제38권6호
    • /
    • pp.1476-1484
    • /
    • 2021
  • 본 연구의 목적은 경두개직류자극(tDCS) 유무에 따른 골프 퍼팅 수행력을 비교 분석하는 것이었다. 본 연구에 참여한 대상자는 신체 건강한 대학 골프선수 10명이 참여하였다. 1대의 SAMPutt basic unit과 tDCS를 이용하여 퍼팅 시 발생하는 운동학적 자료 수집 및 분석을 실시하였다. 통계분석은 경두개직류자극 유무에 따른 퍼팅 수행력을 비교하기 위해 paired t-test를 실시하였으며, 통계적 유의수준은 .05로 설정하였다. 연구결과, 평지 퍼팅에서 FA와 BS가 통계적으로 유의한 차이가 나타났으며, 훅 2° 퍼팅에서 IS가 통계적으로 유의하게 나타났다. 본 연구결과를 바탕으로 추후 경두개직류자극이 퍼팅 시 신체 균형 유지와의 관련성을 규명하는 연구가 필요할 것으로 생각된다.

루프-루프 전자탐사자료의 효과적인 2.5차원 역산 (An efficient 2.5D inversion of loop-loop electromagnetic data)

  • 송윤호;김정호
    • 지구물리와물리탐사
    • /
    • 제11권1호
    • /
    • pp.68-77
    • /
    • 2008
  • 2.5차원 전자탐사 적분방정식의 확장된 Born 근사해 또는 국소 비선형 근사에 기초하여 루프-루프 전자탐사 역산 알고리듬이 개발되었다 송수신 배열은 수평 동일면(HCP) 또는 수직 동일면(VCP) 방식이고, 다중 주파수 및 다중 송수신 간격을 포함할 수 있으며 PC에서 작동된다. 안정적이고 고해상도를 유지하는 역산이 가능하도록 변수분해 행렬과 Backus-Gilbert 분산 함수 분석을 통해 감도 분포의 함수로서의 공간적으로 변화하는 최적 Lagrange 곱수 결정 알고리듬을 포함하였다. HCP와 VCP 배열 자료가 지하 전기비저항 구조에 따라 서로 다른 감도를 가짐에 따라 동시 역산에서 안정성과 해상도에 영향을 미치게 되므로, 계산값과 측정값 차의 분산에 따라 가중치를 적용하는 방식을 도입하였다. 모델링 코드의 정확성은 통상적으로 루프-루프 전자탐사에서 사용하는 주파수 및 송수신 간격 범위에서 유한차분법에 의해 계산된 결과와의 비교를 통하여 증명되었다. 개발된 역산 알고리듬은 먼저 반무한 공간내 전도체 및 저항체가 포함된 모델에 대한 계산자료에 적용되어 성능이 입증되었다. 현장자료에 적용하고 그 결과 영상을 전기비저항 탐사자료에 대한 역산 결과와 비교하여, 의미있는 지하구조의 영상을 얻을 수 있음을 확인하였다.

국내 전철 및 가전제품을 대상으로 한 전자장 수준 실태조사 (A survey on the EMF Levels of Study and Electric Appliances in Korea)

  • 장성기;조용성;이석조;유승화;정경미;임준호
    • 한국산업보건학회지
    • /
    • 제15권1호
    • /
    • pp.71-81
    • /
    • 2005
  • The purposes of this study was to collect, analyze, and describe the MF exposure levels from subways in Korea and to measure and evaluate the MF levels generated from electric appliances used at general homes. The target subway lines were Seoul Metropolitan Line 1 to Line 8, Bundang Line, Incheon Line, Daegu Line, Gwangju Line, and Busan Line 1 and Line 2. We measured at each station in those subway lines and, all the train types (pantograph-equipped, motor-equipped, and common), and platform types(facing and isolating) were investigated by the distance(80, 200, 400 cm) from the train on 19 targeted subway lines using 3 magnetic field measuring devices (EMDEXII, Enertech Co.) during the survey from January till October, 2004. On the other hand, the levels of the 60Hz magnetic fields generated from 14 items of home electric appliances such as electric blankets, hair dryers, electric razors, etc. were measured at 10 general homes using 5 EMDEXII meters with a sampling interval of 1.5 second by the distance(surface, 30, 50, 100, 300cm ) from the target electric appliances. The survey results in the whole subway lines examined in this study were as follows; Seoul Metropolitan Line 4 using AC(alternating current) power source showed the highest mean value of $2.85{\mu}T$, followed by Seoul Metropolitan Line 1 running between Seoul and Incheon using AC($2.78{\mu}T$), Seoul Metropolitan Line 1 between Seoul and Uijongbu using AC($2.73{\mu}T$), Bundang Line using AC($1.79{\mu}T$), Seoul Metropolitan Line 1 connected from Yongsan using AC($1.67{\mu}T$), Seoul Metropolitan Line 1 between Seoul and Suwon using AC($0.79{\mu}T$), and so on. In general, the intensity of the magnetic field in the subway systems in Korea was significantly higher when using AC($2.14{\pm}0.91{\mu}T$) than when using DC($0.29{\pm}0.44{\mu}T$) power source. Among the home electric appliances examined, microwave ovens showed the highest mean value of $7.69{\mu}T$, followed by hair dryers($6.47{\mu}T$), vacuum cleaners($5.27{\mu}T$), televisions ($2.26{\mu}T$), electric blankets($1.38{\mu}T$), personal computers ($0.81{\mu}T$), and so on. Two items of electric appliances showed the excess value of $0.2{\mu}T$ at the distance of 30cm in the MF exposure level; electric razors $1.58{\pm}2.13{\mu}T$ and vacuum cleaners $0.48{\pm}0.44{\mu}T$. As a whole, this study showed a tendency that the shift of the MF levels according to the increase of distance from the electric appliances was lower than those of the results surveyed in UK and USA. As a result, this study is expected to suggest meaningful data for the future study in exposure assessment of magnetic fields and for the establishment of guidelines for subways and electric appliances in Korea. More detailed and large scaled exposure assessment studies should be performed continuously to get the various and useful information on health risk assessment of MFs in Korea.