• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.27-34
• /
• 2024

This study was conducted to examine the feasibility of using Fe-activated wood-derived biochar as a conductive filler for manufacturing cement-based strain sensor. To evaluate the compressive and electrical properties of cement composite with 3% Fe-activated biochar, three cubic specimens of size 50 x 50 x 50mm³ and three prismatic cement-based sensors of size 40 x 40 x 80mm³ were prepared respectively. The four-probe method of electrical resistance measurement was used for cement-based sensors. For cement-based sensors with FE-activated biochar, the conductive performance such as electrical resistance and impedance under different water content and repeated compression was investigated. Results showed that the fractional changes in the DC electrical resistivity of cement-based sensors increase with increasing time and the maximum fractional changes in the resistivity decrease with increasing the moisture contents during 900s. At moisture content of 7.5% range, the conductive performance of cement composite including 3% Fe-activated biochar as a conductive filler showed the most stable, while the strain detection ability tended to decrease somewhat as the repeated compressive stress increased between repeated compressive strain and fractional change in resistivity (FCR).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.4
• /
• pp.41-54
• /
• 2021

This study targets the urban park corresponding to the core areas (Hubs) of Green Infrastructure and estimates their value utilizing the Contingent Valuation Method (CVM) and determines the planning factors which affect them. The research aims to provide basic data for supporting the value improvement in the planning stage for urban parks representing green infrastructure. The primary purpose of this research is to derive variables that affect economic value and planning factors to improve the use-value of urban parks, one of the Hubs of the green infrastructure. In this study, Sejong Lake Park, located in Sejong City, is the target site. This study collected the responses of 105 people by conducting a survey on the intention to pay for the use-value and the planning factors that affect it, targeting visitors to Sejong Lake Park. The study conducts Contingent Valuation Method (CVM) on this survey responses. The results are as follows: first, as a result of analyzing the variables which affect willingness to pay for use-value, residence and age influence the willingness to pay significantly among socioeconomic characteristics. Next, the survey responses of Double-bounded dichotomous choices (DB-DC) CVM are converted into variables through statistic techniques. Furthermore, the variables are used for a Logit model to draw coefficients. The average willingness to pay per person for the use-value of Sejong Lake Park using the derived coefficients was approximately found to be 8,597 won. Therefore, as of 2019, Sejong Lake Park, with a total of 430,000 visitors, is estimated to have an annual economic value of 3.7 billion won. Third, the average Likert scale of the planning factor affecting the decision to pay for the economic value of Sejong Lake Park was the highest along the waterfront landscape, and the convenience facilities and waterfront landscape showed the highest willingness to pay, 10,000 won. In the range between 2,500 won and 5,000 won, the waterfront area ranks highest. Therefore, it can be said that visitors to Sejong Lake Park take account of the economic value of using the waterfront landscape the most. This study is meaningful as a thesis on use-value and the planning factors that affected value evaluation results of urban parks, and the analysis of the correlation between the planning factors of urban parks as hubs located in urban areas.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.6
• /
• pp.550-556
• /
• 1985

In order to evaluate the marine mollusc muscle as foodstuff not only from the biochemical aspect but also from the view point of food science, we have analyzed the protein and amino acid compositions of the echiurid (Urechis unicinctus) and sea hare (Aplysia kurodai) muscle. The protein quality of the muscles was also investigated using in vitro methods based on in vitro digestibility, predicted digestibility, computed PER (C-PER) and discriminant computed PER(DC-PER). The remarkable feature of the protein compositions of the both muscles was that water soluble protein occupied a large amount of the muscle protein with fairly lower contents of the salt soluble protein. From the analysis of SDS-PAG electrophoresis, the sarcoplasmic proteins in the echiurid and the sea hare muscles were composed of 15 and 10 subunits, respectively. The free amino acid compositions of the total amino acids in the echiurid and sea hare muscle were characterized with $75\%$ of glycine and alanine, and with $78\%$ of taurine, respectively. The amino acid anaylsis of both muscle proteins showed that the echiurid muscle was rich in glycine, aspartic acid, glutamic acid, arginine and lysine, but was poor in cysteine, while the sea hare muscle was rich in glycine, glutamic acid, aspartic acid and arginine, but was negligible in cysteine and tryptophan. In the total amino acid profiles of the freeze dried muscles in echiurid and sea hare, there was not found a significant difference compared to the amino acid compositions of the muscle proteins. Predicting the protein quality of the echiurid and sea hare muscles using the in vitro method, it was apparently low compared to the muscle protein of fishes.

• Korean Journal of Microbiology
• /
• v.44 no.3
• /
• pp.212-220
• /
• 2008

A Pn10 DNA probe was introduced as a Prevotella nigrescens ATCC $33563^T$-specific DNA probe. In that study, the specificity of the Pn10 was tested with only type or reference strains of 5 oral bacterial species. The purpose of this study is to evaluate the specificity of the Pn10 using the wild type strains of P. nigrescens and is to develop the P. nigrescens ATCC $33563^T$-specific PCR primers based on the nucleotide sequence of the Pn10. The specificity of the Pn10 DNA probe was determined by Southern blot analysis. The nucleotide sequence of Pn10 DNA probes was determined by chain termination method. The PCR primers were designed based on the nucleotide sequence of cloned DNA fragment. The data showed that Pn10 DNA probe were hybridized with the genomic DNAs from P. nigrescens ATCC $33563^T$ and KB6. The Pn10 homologous region, KB6-Pn10, of P. nigrescens KB6 was cloned by PCR and sequenced. The Pn10 and KB6-Pn10 DNA fragments were consisted of 1,875 bp and 1,873 bp, respectively. The percent identity of the two was 98.8% and the divergence of them was 0.6%. The two primer sets (Pn10-F-AC/ Pn10-R-AC and Pn10-F-A/ Pn10-R-A), designed base on the nucleotide sequences of Pn10 DNA probe, were specific to the P. nigrescens ATCC $33563^T$. The two PCR primer sets could detect as little as 4 pg of genomic DNA of P. nigrescens ATCC $33563^T$. These results indicate that the two PCR primer sets have proven useful for the identification of P. nigrescens ATCC $33563^T$, especially with regard to the maintenance of the strain.

• Journal of the Korean Magnetics Society
• /
• v.7 no.5
• /
• pp.265-273
• /
• 1997

The MR ratios and the exchange biasing field and interlayer coupling field were investigated in $Ni_{91}Fe_{19}/Co_{90}Fe_{10}/Cu/Co_{90}Fe_{10}/NiO$ spin-valve sandwiches grown on antiferromagnetic NiO films as a function of the NiO thickness, the thickness of Cu and pinning layer $Co_{90}Fe_{10}$. The spin-valve sandwiches were deposited on the Corning glass 7059 by means of the 3-gun dc and 1-gun rf magnetron sputtering at a 5 mtorrpartial Ar pressure and room temperature. The deposition field was 50 Oe. The MR curve was measured by the four-terminal method with applied magnetic soft bilayer [NiFe/CoFe] (90$\AA$) decreased dramatically to less than 10 Oe when the NiFe/CoFe bilayer used an NiFe bilayer thicker that 20$\AA$. So NiFe layer improved the softmagnetic properties in the NiFe/CoFe bilayer. The GMR ratio and the magnetic field sensitivity of the spin-valve film $Ni_{91}Fe_{19}(40{\AA})/Co_{90}Fe_{10}(50{\AA}) /Cu(30{\AA})/Co_{90}Fe_{10}(35{\AA})/NiO(800{\AA})$ was 6.3% and about 0.5 (%/Oe), respectively. The MR ratio had 5.3% below an annealing temperature of 20$0^{\circ}C$ which slowly decreased to 3% above 30$0^{\circ}C$. The large blocking temperature of the spin-valve film was taken (as being) due to the good stability of the NiO films. Thus, the spin-valve films with a free NiFe/CoFe layer clearly had a high large GMR output and showed a effective magnetic field sensitivity for a suitable spin-valve head material.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.57-71
• /
• 2015

This study was conducted to develop the fertigation system with a peristaltic hose pump and brushless DC motor. The fertigation system was consisted of sensor, main controller, motor control unit, peristaltic pump, water supply pump, control panel, and filter. The peristaltic pump discharges liquid by squeezing the tube with rollers. Rollers attached to the external circumference of the rotor compresses the flexible tube. The fluid is contained within a flexible tube fitted inside a circular pump casing. The developed fertigation system has no mixing tank but instead injects directly a concentrated nutrient solution into a water supply pipe. The revolution speed of the peristaltic pump is controlled by PWM (Pulse width modulation) method. When the revolution speed of the peristaltic pump was 300rpm, the flow rate of the 3.2, 4.8, 6.3mm diameter tube was 202, 530, 857mL/min, respectively. As increasing revolution speed, the flow rate of the peristaltic pump linearly increased. As the inner diameter of a tube larger, a slope of graph is more steep. Flow rate of three roller was more than that of four roller. Flow rate of a norprene tube with good restoring force was more than that of a pharmed tube. As EC sensor probe was installed in direct piping in comparison with bypass piping showed good performance. After starting the system, it took 16~17 seconds to stabilize EC. The maximum value of EC was 1.44~1.7dS/m at a setting value of 1.4dS/m. The developed fertigation system showed ±0.06dS/m deviation from the setting value of EC. In field test, Cucumber plants generally showed good growth. From these findings, this fertigation system can be appropriately suitable for fertigation culture for crops.