• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.3-11
• /
• 2002

This paper presents the trend of low voltage and high current technology for DC-DC converters. It can be said that the output voltage of the on-board power supply has been rapidly moving forward a low voltage in proportion to the minuteness of the semiconductors. As for as its speed is concerned, the change of the market situation seems to be faster than that of R&D for the low voltage and high current products put out by power supply manufacturers. Here, the present situation and the trend of non-isolated type step-down DC-DC converter and isolated type DC-DC converter called "Brick" will be taken up mainly from the fellowing point of view. -low voltage and high current keeping up with the current demand for the latest telecommunication networks and broadband. -build-up of the total solution for dispersion system power supply. In this paper, an explanation is given to mainly concerning to the newest products in the supplier's position.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권12호
• /
• pp.682-690
• /
• 2002

The conventional three-level high frequency phase-shifted dc/dc converter has a disadvantage that a circulating current flows through transformer and switching devices during the freewheeling interval.. Due to this circulating current and RMS current stress, conduction losses of transformer and switching devices increases. To alleviate these problems, we propose an improved three-level Zero Voltage and Zero Current Switching (ZVZCS) dc/dc converter using a tapped inductor, a snubber capacitor and two snubber diodes attached at the secondary side of transformer. The proposed ZVZCS converter is verified on a 7㎾, 30KHz experimental prototype.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권9호
• /
• pp.431-436
• /
• 2005

This paper studies a novel boost DC-DC converter operated high efficiency for discontinuous current mode (DCM) control. The converter worked in DCM eliminates the complicated circuit control requirement, reduces a number of components, and reduces the used reactive components size. In the general DCM converter, the switching devices are turned-on the zero current switching (ZCS), and the switching devices must be switched-off at a maximum reactor current. To achieve the zero voltage switching (ZVS) at the switching turn-off, the proposed converter is constructed by using a new loss-less snubber circuit. Soft-switched operation of the proposed boost converter is verified by digital simulation and experimental results. A new boost converter achieves the soft-switching for all switching devices without increasing their voltage and current stresses. The result is that the switching loss is very low and the efficiency of boost DC-DC converter is high.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.208-215
• /
• 2020

본 연구에서는 LVDC 배전용 출력 380V DC-DC 컨버터를 3가지 유형으로 설계하였고, 시뮬레이션을 통해 3가지 유형의 DC-DC 컨버터의 전압과 전류 특성을 비교 분석하였다. 전력용 MOSFET와 2개의 전류억제용 IGBT를 병렬구조로 적용하여 컨버터를 구성한 경우, 출력 전압이 DC 380V로 안정화 된 시간이 9ms로 비교적 짧았으며, 출력 측 전류 변화 폭도 44.8~50.2A로 IGBT를 적용하지 않았을 경우(68~83A) 보다 훨씬 변화 폭도 작고 전류억제 효과도 더 뛰어남을 알 수 있었다. 이러한 결과는 제안한 LVDC 배전용 DC-DC 컨버터가 스마트 그리드 구축에 적용 가능성이 있음을 시사한다.

• 전력전자학회논문지
• /
• 제6권2호
• /
• pp.209-216
• /
• 2001

종래의 위상전이 영저낮 스위칭 풀-브리지 DC/DC 컨버터와 비슷하게 영전압 스위칭 3레벨 DC/DC 컨버터의 동작 모드 및 파형에서도 순환모드 구간동안 흐르는 순환전류에 EK라 스위칭소자 및 변압기에서의 도통손실이 증가하는 단점을 갖고 있다. 따라서, 본 논문에서는 스위칭전원의 효율개선 및 스위칭 주파수를 증가시키기 위한 보다 개선되고, 진보된 탭인덕터와 스너버 캐패시터/다이오드로 구성된 2차 측 보조회로 적용 영전압 $\cdot$영전류 스위칭 3 레벨(Level) DC/DC컨버터에 대한 주 회로특성분석 및 7kW, 30kHz DC/DC 컨버터의 시제품을 제작하여 실험한 결과에 대해 서술하고자 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.404-407
• /
• 2011

본 논문은 전류모드에서 동작하는 PWM/PFM DC-DC Boost 변환기의 설계를 하였다. 부하전류가 클 때는 PWM으로 동작하고, 부하 전류가 작을 때는 PFM으로 동작함으로써 높은 효율을 유지할 수 있게 설계하였다. DC-DC Boost 변환기는 $0.35{\mu}m$ 공정으로 설계되었으며, 500KHz의 주파수에 동작하고, 최대 효율은 92.1%이다. 그리고 부하 전류가 최대 600mA까지 구동 할 수 있다. 전체 칩의 크기는 패드를 포함하여 $1300{\mu}m{\times}1070{\mu}m$이다. 따라서 작은 칩 면적으로 넓은 부하전류를 구동할 수 있는 DC-DC Boost 변환기를 설계하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.98-100
• /
• 2007

DC Arc Fault Current is an electric discharge which is occurred in two opposite electrode. In this paper, DC arc detection device is designed for the display of DC arc fault current which is occurred in the local electric network with DC Power. This DC arc is one of the main causes of electric fire. Arc fault in electrical network has the characteristics of low current, high impedance and low frequency. DC Arc current detection device is designed for the display of arc fault current which has the modified arc characteristics.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.461-462
• /
• 2007

DC Arc is an electric discharge which is occurred in two oppolsite electrode when system operating with DC current appliance. In this paper, DC arc detection system is designed for the display of DC arc fault current which is occurred in the local electric network with DC Power. This DC arc is one of the main causes of electric fire of dc system. Arc fault in electrical network has the characteristics of low current, high impedance and low frequency. DC Arc current detection device is designed for the display of arc fault current which has the modified arc characteristics.

• 전력전자학회논문지
• /
• 제28권1호
• /
• pp.59-67
• /
• 2023

This paper explores the variation of DC-Link current ripple analysis in terms of duty cycle and phase angle of Multi-phase/Multi-stage boost converter. A 2-Stage/1-Stage boost converter DC-Link current is used to determine the difference between the 1st stage diode current and the 2nd stage inductor current. Each stage boost converter diode and inductor current is subordinate to the phase angle and duty cycle. The magnitude of the ripple current is variable according to phase angle and duty cycle. The analysis results are verified by variation of DC-Link current ripple using a 1kW typical 2-stage/1-stage boost converter.

• 전기학회논문지
• /
• 제67권4호
• /
• pp.595-599
• /
• 2018

Interruption system with the transformer type superconducting fault current limiter(TSFCL) is proposed in this paper. The interruption system with a TSFCL is a technology that it maximizes the interruption function of a mechanical DC circuit breaker using a transformer and a superconducting fault current limiter. By a TSFCL, the system limits the fault current till the breakable current range in the fault state. Therefore, the fault current could be cut off by a mechanical DC circuit breaker. The Interruption system with a TSFCL were designed using PSCAD/EMTDC. In addition, the Interruption system with a TSFCL was applied to the DC test circuit to analyze characteristics of a current-limiting and a interruption operation. The simulation results showed that the Interruption system with a TSFCL interrupted the fault current in a stable when a fault occurred. Also, The current-limiting rate of the Interruption system with a TSFCL was approximately 69.55%, and the interruption time was less than 8 ms.