• 제목/요약/키워드: DC Trends

검색결과 46건 처리시간 0.024초

ZnO가 첨가된 TiO$_2$의 전기적성질 (Electrical properties of TiO$_2$added ZnO)

  • 김태원;전장배;최우성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1996년도 추계학술대회 논문집
    • /
    • pp.300-302
    • /
    • 1996
  • Using the AC and DC methods we have studied th electrical properties of ZnO added TiO$_2$. The electrical conductivity of ZnO added TiO$_2$ was nearly unchanged with increasing the content of ZnO. Ac conductivity and conductance as a function of Frequency showed the similar trends. The impedance, admittance, and modulus spectrums were consistent with the results of DC conductivity.

  • PDF

통신용 정류시설의 기술적 동향에 관한 연구 (A Study on Technical Trends in Telecom Rectifier Plant)

  • 김만고
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제21권3호
    • /
    • pp.278-283
    • /
    • 1997
  • The rectifier is the main element in the telecom DC power system. This paper investigates the advantages and disadvantages of three rectifier techniques ; thyristor, ferro - resonant, and switched - mode. Compared with other techniques, the switched - mode rectifier tech¬nique offers several advantages such as higher efficiency, smaller size and weight, and lower audible noise. Technical requirements in telecom rectifier plant are also described. Finally, the future trends in telecom powering are discussed in connection with the advance oftelecom net¬works.

  • PDF

직류 전동기 속도제어를 위한 회로 설계 및 모델링 (Circuit design and modeling for DC motor speed control)

  • 윤용호
    • 한국인터넷방송통신학회논문지
    • /
    • 제21권2호
    • /
    • pp.131-136
    • /
    • 2021
  • 직류 전동기 (DC Motor)는 유도전동기와 더불어 광범위한 영역에서 사용되고 있는 중요한 구동원이다. 비록 구조가 복잡하고 유지보수의 측면에서 불리한 점이 있어 오늘날 산업의 동력원으로서 대부분의 수요를 유도전동기에 내어준 상태이지만 우수한 제어성능으로 인하여 소형의 제어용 전동기로는 직류 전동기가 꾸준하게 사용되는 중이다. 또한 계자에 영구자석을 쓸 수 있는 구조로 자석재료의 발달과 더불어 고출력, 고효율 운전이 가능한 구조의 직류 전동기가 개발되고 있다. 그리고 인버터를 이용한 유도전동기의 경우보다 제어기의 구성이 단순하여 아직도 직류 전동기를 선호하는 수요도 무시할 수 없을 정도여서 여전히 중요한 동력원으로 자리를 차지하고 있는 전동기이다. 이러한 경향을 고려하여 본 논문에서는 시뮬레이션을 통한 모델링, EPLD를 이용한 PWM 발생회로 및 전동기구동회로, 프로세서 이용한 PI 제어 등의 하드웨어 구현을 통한 직류전동기의 제어성능을 살펴보고자 한다.

Dental trauma trends in emergency care: a comparative analysis before, during, and after COVID-19

  • Woo-Jung Yang;Ji-Young Yoon
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제49권6호
    • /
    • pp.339-346
    • /
    • 2023
  • Objectives: This analysis details the characteristics of dental trauma in South Korea during the coronavirus disease 2019 (COVID-19) (DC) pandemic and compares them in patients before and after COVID-19 (BC and AC, respectively). Materials and Methods: Data were collected from medical records of patients who visited Seoul National University Bundang Hospital's Emergency Dental Care Center during three 12-month periods: BC, DC, and AC (BC from March 1, 2019 to February 29, 2020; DC from March 1, 2020 to February 28, 2021; AC from March 1, 2022 to February 28, 2023). A retrospective review was conducted to investigate patient age, sex, time of visit, cause, and diagnosis. The study included 1,544 patients: 660 BC, 374 DC, and 510 AC. Results: Significant difference in age and sex was not observed among the three periods; 1-9 years of age was the largest group (38.3% in BC, 29.6% in DC, and 27.8% in AC), and the percentage of male patients was greater than of female patients (male proportion as 63.5% in BC, 67.4% in DC, and 64.9% in AC). The number of patients generally peaked at a Saturday night in spring (for BC: May, Saturday, 18:00-19:59; for DC: March, Saturday, 18:00-19:59; for AC: April as the second most (October as the most peaked), Saturday, 20:00-21:59). The primary etiology of the dental trauma was identical in the three periods: falls, followed by sports. The most frequent diagnosis was laceration, followed by tooth avulsion and jaw fracture. Conclusion: Significant differences were not found between the characteristics and patterns of dental trauma in the BC, DC, and AC periods. However, due to the pandemic and social distancing, activities decreased and associated dental trauma-related incidents declined.

복소변조 공간 광 변조 기술 동향 (Technology Trends of Complex Modulation Spatial Light Modulator)

  • 남제호;김현의;박민식;김용해;황치선
    • 전자통신동향분석
    • /
    • 제37권4호
    • /
    • pp.81-88
    • /
    • 2022
  • In this study, we investigate the trends and prospects of spatial light modulation (SLM) technology that enables full complex modulation as a next-generation SLM. Current SLM technology, which is used as a key element in holography, augmented reality (AR), XR, and realistic displays, has performance limits that modulate only amplitude or phase. Notably, SLM capable of full complex modulation does not produce diffraction noise, unlike DC and twin image, and thus has a high-efficiency performance. In the future, the application field of next-generation SLM, which can be full-complex modulated, is expected to cover a wide range of holography-AR and-XR devices, optical artificial intelligence, and 6G free space optics communications, which will greatly contribute to the development of a super-realistic metaverse platform and service.

DC 인버터 저항 스폿 용접에서 후전류 효과에 관한 연구 (A Study of Post-current Effect in DC Inverter Resistance Spot Welding)

  • 이희준;이세헌
    • 한국생산제조학회지
    • /
    • 제18권6호
    • /
    • pp.598-603
    • /
    • 2009
  • Resistance spot welding has been investigated to apply for manufacturing car bodies because of its high productivity. So quality of resistance spot weld is one of the major concerns for both automobile and aerospace industry. Current design trends in automotive manufacture have shifted emphasis to alternative lightweight materials in order to aid in producing vehicles with higher fuel efficiency and lower down the vehicle emission level for environmental control. There is increasing emphasis to provide lighter cars. Therefore there is an effort to use high strength steels such as HSLA, dual phase, in car body. However there is used in restricted because of difficulty in producing consistently high quality resistance spot welds. In this study, resistance spot welding schedules were developed to achieve acceptable welds with improved static mechanical properties. Improved resistance spot welding schedules were developed using post heating current to reduce the cooling rate, or in-process tempering to reduce the hardness of the weld produced. The effects of resistance spot welding process parameter on hardening fracture mode and static mechanical properties of the joints were determined.

  • PDF

건설폐기물(建設廢棄物)의 리싸이클링 현황(現況)과 연구동향(硏究動向) - 국내자원(國內資源)의 유효이용(有效利用)을 위한 처리(處理) 및 회수기술동향(回收技術動向)(4) - (Recent Status on the Recycling of Construction Waste and Research Trends - The Current Situation of Recycling Technology for Waste Resources in Korea(4) -)

  • 오재현;김미성;신희덕;민지원
    • 자원리싸이클링
    • /
    • 제17권2호
    • /
    • pp.16-29
    • /
    • 2008
  • 우리나라 사업장 폐기물의 51.7%에 해당되는 47,294천톤이 건설폐기물이고, 이 폐기물의 96.7%가 재활용되는 것으로 집계되어 있다. 한편 고품질 순환골재의 생산을 일부기업에서 시도하고 있으나, 천연골재를 대체하기에는 아직 미급한 것 같다. 우리나라의 경우 혼합폐기물의 정의가 애매하여, 혼합폐기물의 선별자원화가 매우 부실하다. 폐목재의 경우 PB(particle board)용으로 수요가 많으나, 현장에서 폐목재의 수집이 쉽지 않다. 2005년 대형국책과제를 수행하는 $\ulcorner$건설폐기물재활용연구단$\lrcorner$이 발족하였다. (사)한국자원리싸이클링 학회지에 게재된 건설폐기물 관련 보문은 주가 폐기물을 이용해서 건설자재로 재활용하는 것에 관한 것이었다.

A Trend Analysis of Dynamic Chair and Applied Technology

  • Hyeong, Joon-Ho;Roh, Jong-Ryun;Park, Seong-Bin;Kim, Sayup;Chung, Kyung-Ryul
    • 대한인간공학회지
    • /
    • 제33권4호
    • /
    • pp.267-279
    • /
    • 2014
  • Objective: The objective of this study was to define the Dynamic Sitting (DS) through trend analysis and research on the Dynamic Chair (DC) and applied technologies. Background: The effects of changing posture on the human body have been studied to find out healthy sitting postures. It is believed that changing posture is effective in reducing disc pressure on spinal cord and preventing back pain and musculoskeletal disease. But, the definition of DS and trends of DC have not been researched yet. Therefore, trend analysis of DC and its applied technologies are required to define dynamic sitting posture. Method: We researched the type of occupant postures from previous studies. And then, sitting behaviors were classified into three types; (1) sitting and standing, (2) working and studying, (3) taking a rest. Results: Variety shapes of DC and applied technologies were found out. From the result, the trend of DC and applied technology were summarized from three perspectives. ; (1) changing the chair functions according to user's intention, (2) conversion of dynamic chair technologies to office chair mechanism, (3) enables the user to change their sitting posture without operating control device. Conclusion: From this study, we defined dynamic sitting posture and analyzed the trend of DC and its applied technologies. This result might be used to develop an office chair for healthy sitting. But further investigation is required to figure out the technologies and functions for development of healthy chair. Application: The results of the publishing trend analysis might help to determine design concept of office chair.

Evaluation of Inbreeding and Genetic Variability of Five Pig Breeds in Czech Republic

  • Krupa, Emil;Zakova, E.;Krupova, Z.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제28권1호
    • /
    • pp.25-36
    • /
    • 2015
  • The complex analysis of the pedigree records of Czech Landrace (CLA), Czech Large White-dam line (CLWd), Czech Large White-sire line (CLWs), Duroc (DC), and Pietrain (PN) was performed to determine trends of genetic diversity (GD), and to find the main sources of the GD loss. The total size of the pedigree was 132,365, 391,151, 32,913, 13,299, and 7,160 animals in CLA, CLWd, CLWs, DC, and PN, respectively. Animals born in the years 2011 through 2013 were assumed as the reference population. The average pedigree completeness index for one generation back was 95.9%, 97.4%, 91.2%, 89.8%, and 94.2% for appropriate breeds. Number of ancestors explaining 100% of gene pool was 186, 373, 125, 157, and 37 in CLA, CLWd, CLWs, DC, and PN, respectively. The relative proportion of inbred animals (58%, 58%, 54%, 47%, and 25%), the average inbreeding (2.7%, 1.4%, 2.5%, 3.6%, and 1.3%) and the average co-ancestry (3.1%, 1.6%, 3.3%, 4.2%, and 3.3%) were found over the past decade in analysed breeds. The expected inbreeding under random mating increased during the last 10 years in CLWs and PN and varied from 1.27% to 3.2%. The effective population size computed on the basis of inbreeding was 76, 74, 50, 35, and 83 in 2012 in CLA, CLWd, CLWs, DC, and PN, respectively. The shortest generation interval (1.45) was observed for CLWd in sire to son selection pathway. The longest generation interval obtained PN (1.95) in sire to daughter pathway. The average relative GD loss within last generation interval was 7.05%, 4.70%, 9.81%, 7.47%, and 10.46%, respectively. The relative proportion of GD loss due to genetic drift on total GD loss was 85.04%, 84.51%, 89.46%, 86.19%, and 83.68% in CLA, CLWd, CLWs, DC, and PN, respectively. All breeds were characterized by a high proportion of inbred animals, but the average inbreeding was low. The most vulnerable breeds to loss of GD are DC and PN. Therefore, a breeding program should be more oriented to prevent the increase of GD loss in these breeds.

지중배전케이블 준공시험 관련 국제규격 동향과 국내기준 개선 방안 (The International Standard Trends of MV Power Cable Installation Test and its Application on Korean Standard)

  • 이재봉;정연하;송일근;조성훈
    • 전기학회논문지
    • /
    • 제57권11호
    • /
    • pp.1933-1937
    • /
    • 2008
  • XLPE insulated power cables are introduced in Korea in 1980s. The cable installation test has been carried out according to the Korean Technical Reference of Electrical Facilities. But recent research results shows DC Hipot test cannot detect the serious defects in XLPE insulated cables. VLF test is recommended as a installation test of XLPE insulated cables by CENELEC and IEEE standards in 1996 and 2001 respectively. We suggest to apply VLF test as an installation test for XLPE insulated MV cables in Korea.