• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1166-1177
• /
• 2014

A new type of topology with medium-frequency-transformer (MFT) isolation for medium voltage wind power generation systems is proposed in this paper. This type of converter is a high density power conversion system, with high performance features suitable for next generation wind power systems in either on-shore or off-shore applications. The proposed topology employs single-phase cascaded multi-level AC-AC converters on the grid side and three phase matrix converters on the generator side, which are interfaced by medium frequency transformers. This avoids DC-Link electrolytic capacitors and/or resonant L-C components in the power flow path thereby improving the power density and system reliability. Several configurations are given to fit different applications. The modulation and control strategy has been detailed. As two important part of the whole system, a novel single phase AC-AC converter topology with its reliable six-step switching technique and a novel symmetrical 11-segment modulation strategy for two stage matrix converter (TSMC) is proposed at the special situation of medium frequency chopping. The validity of the proposed concept has been verified by simulation results and experiment waveforms from a scaled down laboratory prototype.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.624-626
• /
• 2005

디지털 컴퓨터와 측정시스템의 발달로 대전력시험 데이터들은 시험자에 의한 분석이 아닌, 분석프로그램을 이용한 자동 분석이 가능해 졌다. 그러나 분석 프로그램을 이용하여 시험데이터를 분석해야 할 경우, 분석프로그램의 객관적인 신뢰성이 먼저 확보되어야 한다. 최근 들어 이러한 문제점을 보완하기 위하여, STL(Short-circuit Testing Liason)에서는 분석프로그램의 신뢰성평가를 위해 TDG(Test Data Generator)를 개발하였다. 이를 이용하면 대전력시험기관에서 사용하는 분석프로그램간의 객관적인 비교 및 평가가 가능하다. 따라서 본 논문에서는 STL에서 배포한 TDG를 이용하여, Crest, RMS, %DC 분석프로그램 알고리즘의 신뢰성을 평가해 보았다. 또한, STL에서 제시한 reference curve는 50[Hz]를 기본주파수로 하고 있기 때문에, 평가의 신뢰성을 높이기 위해 본 논문에서는 우리나라의 실정에 맞는 60[Hz]의 reference curve도 추가로 고려하였다. 신뢰성 평가 결과 모든 reference curve에 대한 분석알고리즘의 측정불화도가 STL에서 제시하는 범위에 존재함을 확인하였다.

• 한국자기학회지
• /
• 제7권6호
• /
• pp.327-333
• /
• 1997

페라이트, 비정질 코아등의 고주파 연자성재료의 고주파 자기특성 데이터를 디지타이징 방법으로 얻고, 철손 및 B-H 곡선, 투자율을 자동적으로 측정할 수 있는 고주파 자기특성측정장치를 제작하였다. 본 시스템은 교류 인가를 위한 신호발생기와 전력증폭기, 인가자장을 게측하기 위한 전류측정용 저항, H 및 B 신호를 디지타이징 (digitizing)하기 위한 대역폭 500 MHz, 샘플링속도 1 Gs/s의 디지털 오실로스코프, 시스템 제어에 사용되는 GPIB 케이블 및 퍼스널 컴퓨터로 구성되었다. 자계 H 계측을 위한 전류센서로서 저항기(resistor)와 Rogowski 코일을 비교 검토한 결과 고주파 변류기 (current transformer : 이하 CT)가 주파수 특성과 노이즈 억제효과에서 보다 우수하였다. 측정시스템에 동작자속밀도 설정, 비대칭 B-H 곡선의 보정, 구형파등의 다양한 파형지원등의 기능을 부가하였다.

• 전기학회논문지
• /
• 제61권3호
• /
• pp.437-441
• /
• 2012

In this paper, we have designed and manufactured 10MHz power source for the application of short distance wireless power transmission. The designed power source consists of a DDS(direct digital synthesizer) signal generator, a buffer driver and a balanced power amplifier. Short range wireless power transmission is usually carried out by near-field inductive coupling between source and load. The distance variation between source and load gives rise to the change of load impedance of power amplifier, which has effect on the operation of power amplifier. To overcome this problem due to load variation of power amplifier, we have adopted the balanced power amplifier using the quadrature hybrid implemented by lumped capacitors and a mutually coupled coil. The experiment results show the above 40dBm output power, frequency range of 9 to 11MHz, and total DC power consumption of 36W.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권4호
• /
• pp.667-674
• /
• 2004

This thesis is about the Impressed Current Cathodic Protection (ICCP) control and monitoring system. which brings protection against the corrosion of the ship's hull in the sea environments. The ICCP system is composed of a power supply. anode. reference electrode and controller. AC sources from the ship's generator are converted to DC sources in terms of power supply, and a protection current is sent to ship's hull though anode. The controller fully senses whether or not the detected potential is within a range of protection of ship's hull and then it is automatically controlled to increase or decrease the amount of protective current to be sent to the anode. The monitoring system with RS 232/485 communication is also studied in order to check the normal state of the system at a long period. because an operator does not always watch over this system and thus the system cannot operate well because of his or her negligent management. Since the vessel always navigates in the sea. an characteristics experiment of the ICCP system is conducted by introducing various corrosive environmental factors such as velocity, resistivity, dissolved oxygen, PH, temperature and contamination degree. These results must be referred to when the ICCP system is set up. In short. the ICCP is a multi-system for use on ships and on land structures because it includes a safety device. It is suggested that this system can accomodate a ship's automation and will be very useful.

• 한국생산제조학회지
• /
• 제24권3호
• /
• pp.314-319
• /
• 2015

Invar is a compound metal of Fe-Ni system contained 36.5% Ni. The characteristic of invar is that the coefficient of thermal expansion is $1.0{\times}10^{-6}cm/^{\circ}C$. It is approximately 10 times smaller than series of steel. Because of this low thermal expansion characteristic of Invar, it is used to shadow mask of display device such as UHDTV or OLED TV. In this study, pulse current from pulse generator instead of DC current is used to overcome the disadvantages of the conventional electrochemical machining. Pulsed current with different duty factor in PECM affect the precise geometry. Pulse electrochemical machining is conducted to machine the micro hole to the invar sheet with different duty factor. The machined shape and overcut of invar sheet with different duty factor is observed by optical microscope and scanning electron microscope (SEM).

• Journal of Biosystems Engineering
• /
• 제36권3호
• /
• pp.171-179
• /
• 2011

Facing the current hikes of labor wage and high oil price, it is needed to have energy-saving machinery which also enables us precise farm operations. Thus, it was necessary to develop a safe machine which allows secure and pleasant works along orchard slopes. In this study, a lifting utility with balance-controlled platform was developed. The platform utility could maintain to level the workbench while driving along slopes. Even the machine body was driven at the tilt angle ranges of ${\pm}20^{\circ}$, the platform bench could be maintained within ${\pm}0.5^{\circ}$ of a gimbal angle. In addition, the machine lifted up to 2.0 m using an electric-hybrid driving mechanism with a low noise. A tandem hybrid power source was developed with a DC 72 V, 100 AH for the Deep-Cycle batteries, charged with 3.5 kW gasoline generator as an auxiliary power source. HST, which is one of the CVT's, was adopted as a transmission device, and a crawer track was used for the safety of the vehicle against tip-over. The maximum lifting height of platform was is 2,500 mm, and the maximum extendable width was 2,900 mm.

• 한국항공우주학회지
• /
• 제48권4호
• /
• pp.303-310
• /
• 2020

본 논문은 무인항공기 전기시스템을 위한 전원모니터링장치에 대해서 기술하고 있으며, 무인항공기에 장착되는 AC/DC 발전기, 전원변환기, 배터리 및 기어박스의 데이터 측정과 임무장비의 전원 ON/OFF 장치를 운용하는 전원모니터링장치에 대한 설계를 기술하였다. 전원모니터링장치는 비행체 전원(발전기, 전원변환기 및 배터리)에 대한 전압과 전류를 측정하고, 기어박스의 압력과 온도를 측정하며, 임무컴퓨터로부터 수신된 임무장비의 전원명령을 수행한다. 전원모니터링장치는 무인항공기 비행체 요구사항을 만족하도록 설계하였으며, 구조/열 해석, 환경/EMI 및 지상/비행시험을 통하여 검증을 수행하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 자성 및 자성재료 국제학술대회
• /
• pp.95-95
• /
• 2013

The NdFeB magnet can be classified into the sintered magnet and bonded magnet. The former has superior magnet characteristics but the degree of freedom in shape is highly restricted, whereas the latter has a high degree of freedom, but its magnet characteristics are inferior to the former. When a NdFeB magnet is used at the elevated temperature, part of Nd must be replaced with a high priced Dy to increase its coercive force. For these reasons, a Dy free and high performance NdFeB bonded magnet is desired strongly. The author successfully developed a Dy free NdFeB anisotropic bonded magnet based on discovery of new phenomena called as d-HDDR reaction and its mass production process such as a thermally balanced hydrogen reaction furnace, micro capsuled powder, compression molding / injection molding under magnetic field, magnetic die and so on. Applied to DC brush seat motor for automotive use, the motor has become 50% small in size and weight. The commercialization of a half sized motor for automotive use has been realized up to the market share of 30%. At present, its commercialization is extending to various types of motors such as power tool, ABS motor, wiper motor, window motor, electric bike power motor, and compressor motor. It is expected that the applications will be increasingly enlarged to EV motor, wind generator, EPS motor, washing machine, and glass cutting machine. This innovative technology has realized Dy free high performance magnet and mudt make big contribution to not only rare element strategies but also energy conservation.

• 한국태양에너지학회 논문집
• /
• 제34권1호
• /
• pp.91-97
• /
• 2014

This paper proposes a modeling of fuel cell which replaces dc source during simulation. Fuel cells are electrochemical devices that convert chemical energy in fuels into electrical energy. This system has high efficiency and heat, no environmental chemical pollutions and noise. Proton exchange membrane fuel cells (PEMFC) are commonly used as a residential generator. These fuel cells have different electrical characteristics such as a low voltage and high current compared with solar cells. And there are different behaviors in the V-I curve in the temperature and pressure. Therefore, the modeling of fuel cell should consider wide voltage range and slow current response and the resulting electrical model is applied to boost converter with fuel cell as an input source.