• 한국정보전자통신기술학회논문지
• /
• 제12권1호
• /
• pp.13-21
• /
• 2019

내용기반 영상검색은 영상 내의 정보인 색상, 질감, 형태 등의 특징 값을 추출하여 검색에 이용한다. 본 논문에서는 $8{\times}8$ 이산여현변환, 즉 $8{\times}8$ DCT(Discrete Cosine Transform) 후 얻어지는 DC, AC계수를 이용하여 필터뱅크(filter-bank)를 생성하고, 이를 영상의 내용기반 검색에 이용하는 검색방법을 제안한다. 제안된 방법은 생성된 DCT 필터뱅크에서 DC성분과 주요한 AC성분인 AC01, AC10, AC11 만을 이용하며, DC성분에 대한 양자화를 수행하여 계산량을 최소화한다. 그리고 양자화된 DC성분에 대한 히스토그램 정보를 기반으로 영상 검색에 필요한 특징 값을 산출한다. AC성분에 대해서는 Otsu 이진화를 통하여 개괄적인 형태정보를 취득한 다음 이에 대한 수평/수직 방향으로의 투영 히스토그램을 계산하여 특징 값을 취득한다. 추출된 AC성분의 특징 값은 DC성분의 특징 값과 함께, 특징벡터 빈(feature vector bins)을 구성하여 검색을 수행한다. 실험은 1000장의 데이터베이스를 이용하여 수행 되었으며, 기존의 색상정보를 이용한 검색방법보다 우수한 성능을 보임을 확인하였다.

• ETRI Journal
• /
• 제33권5호
• /
• pp.814-817
• /
• 2011

In this letter, the distributions of direct current (DC) coefficients for P-frames in H.264/AVC are analyzed, and the distortion model of the Gaussian source under the quantization of the dead-zone plus-uniform threshold quantization with uniform reconstruction quantizer is derived. Experimental results show that the DC coefficients of P-frames are best approximated by the Laplacian distribution and the Gaussian distribution at small quantization step sizes and at large quantization step sizes, respectively.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.867-870
• /
• 1998

Video data is usually stored in a compressed format in order to reduce the storage space. For efficient browsing, searching, and retrieval of compressed video sequences, size-reduced images (or DC images which are formed with block DC coefficients) are generally preferred to avoid unnecessary computational complexity. In this paper, we propose a DC image extraction scheme appropriate for scene analysis and efficient browsing of compressed video sequences. The proposed algorithm utilizes predicted low frequency AC coefficients to achieve better approximation and to reduce the error drift. Due to the AC prediction based on a quadratic surface model, the proposed scheme requires no additional memory compared with the previous zero-order or first-order approximation scheme. Simulation results show that the proposed scheme achieves better subjective and objective quality with minor additional operations.

• 한국멀티미디어학회논문지
• /
• 제16권4호
• /
• pp.411-417
• /
• 2013

In this paper, we proposed a fast detection method of copy-move forgery image based on low frequency coefficients of the DCT coefficients. We proposed a new matching criterion of copy-moved forgery image detection (MCD) using discrete cosine transform. For each $8{\times}8$ pixel block, the DCT transform is calculated. Our algorithm uses low frequency four (DC, 3 AC coefficient) and six coefficients (DC, 5 AC coefficients) of DCT per $8{\times}8$ pixel block. Our algorithm worked block matching for DCT coefficients of the $8{\times}8$ pixel block is slid by one pixel along the image from the upper left corner to the lower right corner. Our algorithm can reduce computational complexity more than conventional copy moved forgery detection algorithms.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.378-388
• /
• 2015

This paper proposes a pulse width modulation (PWM)-based sliding mode controller (SMC) for a full-bridge DC-DC converter that can eliminate static output voltage error. Hysteretic SMC in DC-DC converter does not have a fixed switching frequency, and applying hysteretic SMC to full-bridge converters is difficult. Fixed-frequency SMC, which is also called PWM-based SMC, based on equivalent control overcomes these shortcomings. However, the controller order reduction in equivalent control in PWM-based SMC causes static output voltage error. To resolve this issue, an integral item is added to the PWM-based SMC. Sliding mode coefficients are designed by applying a standard second-order system to the sliding mode surface. The effect of adding an integral item on the controller is analyzed, and an integral coefficient design method is proposed. Experiment results on a three-level full-bridge DC-DC converter verify the control scheme and design method proposed in this paper.

• 한국정보통신학회논문지
• /
• 제16권10호
• /
• pp.2253-2260
• /
• 2012

본 논문에서는 H.264/AVC 복호기의 역변환과 역양자화를 위한 효율적인 하드웨어 구조를 제안한다. 기존 역변환 및 역양자화기에서는 AC계수와 DC계수를 복호하는 순서가 다르다. 색차 DC계수와 인트라 $16{\times}16$ 모드에서 휘도 DC계수는 역변환을 수행하고 역양자화를 수행하는 반면에, 휘도 및 색차 AC계수는 역양자화를 수행하고 역변환을 수행하기 때문에 하드웨어로 구현시 제어 복잡도가 증가한다. 제안하는 구조는 DC계수와 AC계수에 관계없이 역양자화를 수행한 후 역변환을 수행하여 제어 복잡도를 감소시키고, 역양자화 연산을 공통 연산기를 사용하여 처리함으로써 계산 복잡도가 감소한다. 기존 역양자화기에는 나눗셈 연산을 포함하고 있어 복호하는 순서를 변경할 경우 오차가 발생하기 때문에 나눗셈 연산을 역변환 후에 수행하여 오차를 방지한다. 또한, 역변환기와 역양자화기를 3단 파이프라인으로 구성하고 수평 IDCT와 수직 IDCT를 병렬로 구현하여 수행 사이클을 감소시켰다. 제안하는 역변환기와 역양자화기의 매크로블록 당 처리되는 사이클 수를 비교 분석한 결과, 기존 구조 대비 45%이상 향상된 결과를 얻었다.

• 산업기술연구
• /
• 제30권A호
• /
• pp.69-73
• /
• 2010

In this paper, we designed the RF-DC converter used in wireless power transmission system and studied how to design the RF-DC converter of high conversion efficiency. The RF-DC converter operate at 2.45GHz and the diode is connected with series. The RF-DC converter uses shorted stub for DC loop and matching. We can divide the RF-DC converter circuit into four blocks. The reflection coefficients between the blocks were optimized for the maximum conversion efficiency at 0 dBm input power and $1300{\Omega}$ load impedance. The final design of the RF-DC converter has a 52 percent conversion efficiency.

• ETRI Journal
• /
• 제34권2호
• /
• pp.190-198
• /
• 2012

An adaptive correlation noise model (CNM) construction algorithm is proposed in this paper to increase the efficiency of parity bits for correcting errors of the side information in transform domain Wyner-Ziv (WZ) video coding. The proposed algorithm introduces two techniques to improve the accuracy of the CNM. First, it calculates the mean of direct current (DC) coefficients of the original WZ frame at the encoder and uses it to assist the decoder to calculate the CNM parameters. Second, by considering the statistical property of the transform domain correlation noise and the motion characteristic of the frame, the algorithm adaptively models the DC coefficients of the correlation noise with the Gaussian distribution for the low motion frames and the Laplacian distribution for the high motion frames, respectively. With these techniques, the proposed algorithm is able to make a more accurate approximation to the real distribution of the correlation noise at the expense of a very slight increment to the coding complexity. The simulation results show that the proposed algorithm can improve the average peak signal-to-noise ratio of the decoded WZ frames by 0.5 dB to 1.5 dB.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.827-830
• /
• 2000

In this paper, we propose the method using PCA(principal component analysis) algorithm when proposed algorithm performs multimedia information indexing. After we extract DC coefficients of DCT from MPEG video stream which is an international standard of moving picture compression coding, we apply PCA algorithm to image made of DC coefficients and extract the feature of each DC image. Using extracted features, we generate codebook and perform multimedia information indexing. The proposed algorithm Is very fast when indexing and can generate optimized codebook because of using statistical feature of data

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권6호
• /
• pp.1222-1236
• /
• 2010

In this paper, we propose an improved distributed multi-view video coding method that is robust to illumination changes among different views. The use of view dependency is not effective for multi-view video because each view has different intrinsic and extrinsic camera parameters. In this paper, a modified distributed multi-view coding method is presented that applies illumination compensation when generating side information. The proposed encoder codes DC values of discrete cosine transform (DCT) coefficients separately by entropy coding. The proposed decoder can generate more accurate side information by using the transmitted DC coefficients to compensate for illumination changes. Furthermore, AC coefficients are coded with conventional entropy or channel coders depending on the frequency band. We found that the proposed algorithm is about 0.1~0.5 dB better than conventional algorithms.