• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.E4
• /
• pp.157-162
• /
• 2001

Jet Bubbling Reactors(JBRs) were operated for the removal of SO$_{x}$ in flue gases produced from many electric power plants. However, many JBR flue gas desulfurization (FGD) facility faced a decrease of SO$_{x}$ removal efficiency and an increase of scale problems with continuous operations. We increased alkalinity of the SO$_{2}$ absorbing medium by adding the dibasic acids (DBAs) to solve these problems more effectively. The SO$_{2}$ removal efficiency, the purity of CaCO$_{3}$ and COD of the wastewater was measured to identify the addition effects of DBAs (150, 200, 250, and 400 ppm) for 2hr in a day into the JBR attached to the large-scale power plants (400 MW$\times$3). Addition of the DBAs resulted in the improvement of the SO$_{2}$ removal efficiency from 2 to 5% and the purity of the gypsum from 1 to 2%; these improvement were due to the alkalinity increase of the absorbing medium and the reduction of a proportion of un-reacted CaCO$_{3}$, respectively. Also, the scale problems formed by un-reacted CaCO$_{3}$ inside the reaction zone of the JBR were substantially reduced. Even though the effluent COD of the wastewater slightly increased from 10~15 to 18~36 mg/l and the erosion problems in the injection pump and duct occurred, this method of increasing SO$_{2}$ removal efficiency by adding the DBAs could be considered as a profitable approach.ach.

• Sleep Medicine and Psychophysiology
• /
• v.17 no.1
• /
• pp.34-40
• /
• 2010

Objectives: This study aimed to evaluate the clinical efficacy of individual cognitive behavioral therapy (CBT) for Patients with Primary or Secondary Insomnia. Methods: Participants were recruited from a primary care sleep clinic from January 2008 to June 2009. The study sample included 64 outpatients with primary insomnia (n=30) and secondary insomnia (n=34) according to the criteria of DSM-IV. Participants completed sleep diaries, Dysfunctional Beliefs and Attitudes about Sleep Scale-16 (DBAS), State-Trait Anxiety Inventory (STAI) before CBT and shortly after completion of CBT. CBT was provided in 7 weekly, 40-50-minute individual therapy sessions. Results: Both groups of patients with primary and secondary insomnia showed significant improvement in the DBAS and sleep parameters including sleep onset latency, total sleep time, and sleep efficiency. Repeated-measures ANOVA of the DBAS and sleep parameters showed no significant group-by-time interactions between patients with primary and secondary insomnia, suggesting the efficacy of CBT for patients with secondary insomnia was equivalent to that of CBT for patients with primary insomnia. Conclusion: This study suggests that CBT is effective for the management of primary and secondary insomnia in a primary care setting.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.576-577
• /
• 2003

I. Objectives This study investigated the dentin shear bond strength and the degree of conversion (DC) of currently used dentin bonding agents (DBAs) that were irradiated with a light emitting diode (LED) light curing unit (LCU) and a halogen LCU. II. Materials and methods The halogen LCU and the LED LCU used in this study were a VIP(Bisco, Schaumburg, IL, USA) and an Elipar Freelight(3M ESPE, St Paul, MN, USA) respectively. For the VIP, $400mW{\cdot}cm-2$ intensity mode was used to adjust to the intensity of the LED LCU. The DBAs used in this study were Scotchbond Multipurpose (3M ESPE), Single Bond (3M ESPE), One-step(Bisco), Clearfil SE Bond(Kuraray), and Adper Prompt(3M ESPE).(omitted)

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.68-93
• /
• 1998

The physical properties of polymer are greatly influenced by the extent to which a resin cures. The presence of un reacted monomer can, have a plasticizing effect on the polymer, thereby altering the physical and mechanical properties of dentin bonding agent (DBA). If the DBA does not polymerize sufficiently, it will leave a weak bonding layer and lead to lower bond strength. The purpose of this study was to evaluate the shear bond strengths(SBS) and the degree of conversion (DC) of 4 commercialy avilable dentin bonding systems which are composed of 2 multi-bottle systems [Scotchbond Multi-Purpose (SMP), AeliteBond(AB)] and 2 onebottle systems [SingleBond(SB), One-Step(OS)]. For shear bond strength measurement, labial surfaces of freshly extracted bovine incisors were ground with # 600 grit SiC paper to expose dentin. Four different groups of samples were formed, with 10 samples. being made for each of the 4 commercial DBA in each group according to the curing sequences of DBA and overlayer thickness of composites: Group I (standard cure and 1mm thick composites) : The DBA was light cured and the composites of 1mm thickness was applied ; Group II (standard cure and 2mm thick composites) : The DBA was light cured and the composites of 2mm thickness was applied; Group III (simultaneous cure and 1mm thick composites) : The DBA was not light-cured and simultaneously cured with composites of 1mm thickness; Group N (simultaneous cure and 2mm thick composites) : The DBA was. not light-cured and simultaneously cured with composites of 2mm thickness. The SBS was measured immediately after the composites was bonded to the bovine dentin using an Instron machine. The DC of the DBA was examined in a thin film under simulated conditions of the experimental groups according to the curing sequences and overlayer thickness of composites in the SBS test. using a Fourier transform Infrared(FTIR) spectrometer. The following results were obtained from SBS tests and DC measurements 1. In SBS tests, the multi-bottle DBA(SMP, AB) had a generally higher bond strength values than the one bottle DBA(SB, OS). In DC measurements, the one bottle DBA(SB, OS) had a significantly higher DC than the multi-bottle DBA(SMP, AB). 2. In all DBAs except OS, there was no significant difference between the bond strength of group I (standard cure and 1mm thick composites) and that of group III (simultaneous cure and 1mm thick composites). SMP, SB in Group I had a significantly higher DC than those in group III, but AB, OS in group I had a significantly lower DC than those in group III 3. All DBAs in Goup II (standard cure and 2mm thick composites) had significantly higher bond strength and DC than those in Group N (simultaneous cure and 2mm thick composites). 4. In all DBAs, there was no significantly different SBS and DC between Group I and Group II, but all DBAs in Group III had significantly higher SBS and DC than those in Group IV.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.213-223
• /
• 2008

The objective of this study was to compare dentin shear bond strength (DSBS) of dentin bonding agents (DBAs) cured with a plasma arc (PAC) light curing unit (LCU) and those cured with a light emitting diode (LED) LCU. Optical properties were also analyzed for Elipar freelight 2 (3M ESPE); LED LCU, Apollo 95E (DMT Systems); PAC LCU and VIP Junior (Bisco); Halogen LCU. The DBAs used for DSBS test were Scotchbond Multipurpose (3M ESPE), Singlebond 2 (3M ESPE) and Clearfil SE Bond (Kuraray). After DSBS testing, fractured specimens were analyzed for failure modes with SEM. The total irradiance and irradiance between 450 nm and 490 nm of the LCUs were different. LED LCU showed narrow spectral distribution around its peak at 462 nm whereas PAC and Halogen LCU showed a broad spectrum. There were no significant differences in mean shear bond strength among different LCUs (P > 0.05) but were significant differences among different DBAs (P < 0.001).

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.213-223
• /
• 2008

The objective of this study was to compare dentin shear bond strength (DSBS) of dentin bonding agents (DBAs) cured with a plasma arc (PAC) light curing unit (LCU) and those cured with a light emitting diode (LED) LCU. Optical properties were also analyzed for Elipar freelight 2 (3M ESPE); LED LCU, Apollo 95E (DMT Systems); PAC LCU and VIP Junior (Bisco); Halogen LCU. The DBAs used for DSBS test were Scotchbond Multipurpose (3M ESPE), Singlebond 2 (3M ESPE) and Clearfil SE Bond (Kuraray). After DSBS testing, fractured specimens were analyzed for failure modes with SEM. The total irradiance and irradiance between 450 nm and 490 nm of the LCUs were different. LED LCU showed narrow spectral distribution around its peak at 462 nm whereas PAC and Halogen LCU showed a broad spectrum. There were no significant differences in mean shear bond strength among different LCUs (P > 0.05) but were significant differences among different DBAs (P < 0.001)

• Archives of Pharmacal Research
• /
• v.18 no.6
• /
• pp.371-375
• /
• 1995

Erythropoietin (EPO), a glycoprotein hormone, regulates the proliferation and differentiation of ereythroid progenitor cells. Many attempts have been made to identify the functionally important amino acids of the hormone. One of those early studies has found that heavy redioiodination of EPO caused the loss of its biological activity, suggesting some important role of one of the four tyrosine residues (Goldwasser, 1981). Thus, in this study, we have generated and tested four $Tyr{\dashrightarrow}Phe$ substitution mutants to clarify the possible role of the tyrosine residue(s) in the hormone's Tyrosine residue(s) in the hormone's biological activity. When the mutant and wild type EPO cDBAs were transfected into COS-7 cells and the biological activities of the muteins were assayed using the primary murine erythroid spleen cells, no mutation tested was found to affect the biological activity of the hormone. Thus we conclude that, contrary to the previous observation, none of the four tyrosine in eryghropoietin is critically involved in the binding of the hormone to its receptor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10A
• /
• pp.1756-1763
• /
• 2001

In this paper, we propose an ATM-LAN IWU(interworking unit) with threshold based dynamic bandwidth allocation scheme. We analyze a discrete-time based finite queueing model with deterministic service times in order to investigate the performance of the proposed scheme. It is known that the arrival process of IP packets is bursty. So we use an MMPP(Markov Modulated Poisson Process) to model the bursty input traffic. As performance measures, we obtain the packet loss probability and the mean packet delay. We present some numerical results to show the effects of the thresholds on the performance of the DBAS(dynamic bandwidth allocation scheme).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1693-1713
• /
• 2018

An important technique used by database administrators (DBAs) is to improve performance in decision-support workloads associated with a Star schema is multi-level partitioning. Queries will then benefit from performance improvements via partition elimination, due to constraints on queries expressed on the dimension tables. As the task of multi-level partitioning can be overwhelming for a DBA we are proposing a wizard that facilitates the task by calculating a partitioning scheme for a particular workload. The system resides completely on a client and interacts with the costing estimation subsystem of the query optimizer via an API over the network, thereby eliminating any need to make changes to the optimizer. In addition, since only cost estimates are needed the wizard overhead is very low. By using a greedy algorithm for search space enumeration over the query predicates in the workload the wizard is efficient with worst-case polynomial complexity. The technology proposed can be applied to any clustering or partitioning scheme in any database management system that provides an interface to the query optimizer. Applied to the Teradata database the technology provides recommendations that outperform a human expert's solution as measured by the total execution time of the workload. We also demonstrate the scalability of our approach when the fact table (and workload) size increases.

• Journal of Digital Contents Society
• /
• v.18 no.6
• /
• pp.1207-1211
• /
• 2017

Long-Reach PON (LR-PON) is a broadband access network using passive optical network (PON) technology which the reach is extended to 100 km or higher. A major challenge in LR-PON is that the propagation delay between OLT and ONUs is increased by a very significant amount. To effectively and fairly distribute the upstream bandwidth dynamically in LR-PON, we propose a new periodic and multi-thread polling based dynamic bandwidth allocation (DBA) algorithm. We compare the proposed algorithm with traditional DBAs and show its advantage on average packet delay. Numerical results are analyzed under varying offered loads.