• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.1
• /
• pp.63-73
• /
• 2014

Recently, researches on DBRN(DataBase Referenced Navigation) system are being carried out to replace GNSS(Global Navigation Satellite System), as weaknesses of GNSS were found that are caused by the intentional interference and the jamming of the satellite signal. This paper describes the gravity gradient modeling and the construction of EKF(Extended Kalman Filter) based GGRN(Gravity Gradient Referenced Navigation). To analyze the performance of GGRN, fourteen flight trajectories were made for simulations over whole South Korea. During the simulations, we considered the errors in both DB(DataBase) and sensor as well as the flight altitudes. Accurate performances were found, when errors in the DB and the sensor are small and they located at lower altitude. For comparative evaluation, the traditional TRN(Terrain Referenced Navigation) was also developed and performances were analyzed relative to those from the GGRN. In fact, most of GGRN performed better in low altitude, but both of precise gravity gradient DB and gradiometer were required to obtain similar level of precisions at the high altitude. In the future, additional tests and evaluations on the GGRN need to be performed to investigate on more factors such as DB resolution, flight speed, and the update rate.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.255-258
• /
• 2003

합섬소재를 이용한 의류용 직물설계1)에 있어 원료의 특성과 경ㆍ위사의 번수, 직물의 조직 및 밀도에 따른 직물설계 조건$^{2)}$ 은 다양하게 변할 수 있다. 그럼에도 불구하고 현장에서 적용할 수 있는 이론적 배경과 실제 현장에서 적용할 수 있는 데이터는 미흡한 수준이다. 따라서 다품종 소량 생산 체제에 대비하는 다양한 소재의 설계에 필요한 Data Base 구축이 필요한 실정$^{3)}$ 이다. 본 연구는 직물용 CAD System에서의 합섬 의류용 직물설계에 응용 가능한 DB를 구축하기 위해 국내 직물설계$^{4)}$ 와 일본 직물설계$^{5}$)를 비교하여 국내직물의 수준을 향상시킬 목적으로 실제 현장에서 사용되고 있는 각각 100여 종류의 직물설계조건들을 조사ㆍ분석하여 국내와 일본 직물설계를 비교함으로써 감성 의류용 합섬 소재 설계에 있어 체계적인 지표가 되고 보다 우수한 품질을 위한 직물설계의 기초자료를 제공함으로써 현업에 있는 업체와 기관에 도움을 주고자 한다. (중략)

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3065-3072
• /
• 2011

PID Control Data Base creation device of DCU is safety operation technology of train door. For keeping the normal condition of door, measured value of regular condition and unusual(trouble detected) condition should be recorded by encoding. The door should be measured itself as this value is compared with standard vale. If it's condition of the door and for reaching the datum point and ot does self-diagnosis. This aim for Technical Realization is that carry out safety train operation by using the Estimation Data Base and protect before door-trouble.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2563-2568
• /
• 2012

The growth speed of the industry of national smart phone game service has become faster and the its economical and cultural effect has increased steadily these days. The DB design for data perpetuation in C/S MMO which has accumulated data a lot and many simultaneous plays like smart phone games is very important. This paper, mindful of the operation and the scalability suitable for android OS, by utilizing RDBMS, enabling very short, many transactions, their complexity, and a large amount of game data process, suggests fully-qualified MMORPG game service architecture design techniques widely available for more than online game industries.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.89-92
• /
• 2002

As the use of Internet being generalized, ordering system can be easily achieved on the Web so that the direct sailing system is replaced the various types of Built-To-Order system. It is important to give the up-to-date information to the end-user in order to build the Built-To-Order system. Recently, the way of providing information is updating the product related information continuously. In this study, we provide the method that can be streamlined Product Data Management System which manages a creation and update for product information into the direct BTO system in order to achieve the newest information. This methodology is not only transferring the information but also processing the information in an appropriate form. So this paper is going to cover the various point of view of information processing.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.88-92
• /
• 2015

Today, the medical information system has evolved in the way of integrated healthcare IT information systems. Therefore, it is trying to build advanced U-Healthcare service. Though the U-Healthcare environments is exchanged the information between systems in many cases, however since the each system is different, the integration and exchange of data is difficult. To overcome this problem, in this paper it proposes that we suggests a possible DBaaS(DataBase as a Service) for the heterogeneous integration of medical information management and data exchange. First, the proposed system builds DBaaS cloud by integrating the meta-DB Schema level and DB Schema for each hospital. And, the mapping the schema data and the existing hospital information system is possible using the International Standard HL7. By applying the proposed method to the hospital system, it comes true the efficient exchange of information between the patients, doctors, staffs through the data mapping of the one to multi-system.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.708-711
• /
• 2008

This study is intended to build research for ways to utilize material information in the design and working business for public works. The contents and results of this study can be classified into object-oriented DB application to bridge construction and object-oriented DB utilization of civil material information. First, application of object-oriented DB to bridge construction 1) constructs the work unit of classified work table as an object(Each object constructs material information on the statement of quantity calculation as data), 2) constructs object-oriented DB for superstructure and substructure of PSC Beam bridge, 3) leads to the research for ways to utilize materials by developing 3D bridge prototype with REVIT structure. Secondly, ways to utilize object-oriented DB for civil material information identified the possibility for utilizing it in making 2D drawings for design work, preparing materials list, analyzing structure for working businesses, selecting and purchasing materials, managing process and maintaining. It is suggested that the results of this study should be applied to all bridge constructions through test-bed and additional studies so as to secure the credibility of the results of this study.

• Journal of the Korea Convergence Society
• /
• v.6 no.4
• /
• pp.243-248
• /
• 2015

U-Healthcare is a convergence service with medical care and IT which enables to examine, manage and maintain the patient's health any time and any place. For communication conducted in U-Healthcare service, the transmission methods are used that patient's medical checkup analysis results or emergency data are transmitted to hospital server using wireless communication method. At this moment when the attacker who executes the malicious access makes DRDoS(Distributed Reflection DoS) attack to U-Healthcare devices or BS(Base Station), various damages occur that contextual information of urgent patients are not transmitted to hospital server. In order to deal with this problem, this study suggests DRDoS attack scenario and countermeasures against DRDoS and converges with Big Data which could process large amount of packets. When the attacker attacks U-Healthcare devices or BS(Base Station), DB is interconnected and the attack is prevented if it is coincident. This study analyzes the attack method that could occur in U-Healthcare devices or BS which are remote medical service and suggests countermeasures against the security threat using Big Data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2851-2858
• /
• 2011

The schedule management in construction project have been performed independently by two method, WBS base management and CBS based management, However, the integrated management model is needed according to efficiency of construction project management and introduction of new EVMS system of KOREA government. For this purpose, interworking database system is designed through efficient modeling of WBS based management data and CBS based management data and relation establishment between entities in this paper. WBS based management DB consists of 4 entities and CBS based management DB consists of 3 entity and one of the 4 WBS DB entities is used to play interworking role between WBS and CBS, Also, attributes of all entities are well defined so that data consistency, integrity and newest are guaranteed. The designed interworking database model was realized using Nex-Pert Pro and the efficiency of data interworking was proved.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.2
• /
• pp.47-62
• /
• 2016

An integrated database(DB) system was developed to manage the marine geological data and geophysical data acquired from around the Korean peninsula from 2009 to 2013. Geological data such as size analysis data, columnar section images, X-ray images, heavy metal data, and organic carbon data of sediment samples, were collected in the form of text files, excel files, PDF files and image files. Geophysical data such as seismic data, magnetic data, and gravity data were gathered in the form of SEG-Y binary files, image files and text files. We collected scientific data from research projects funded by the Ministry of Oceans and Fisheries, data produced by domestic marine organizations, and public data provided by foreign organizations. All the collected data were validated manually and stored in the archive DB according to data processing procedures. A geographic information system was developed to manage the spatial information and provide data effectively using the map interface. Geographic information system(GIS) software was used to import the position data from text files, manipulate spatial data, and produce shape files. A GIS DB was set up using the Oracle database system and ArcGIS spatial data engine. A client/server GIS application was developed to support data search, data provision, and visualization of scientific data. It provided complex search functions and on-the-fly visualization using ChartFX and specially developed programs. The system is currently being maintained and newly collected data is added to the DB system every year.