• 제목/요약/키워드: DAW

검색결과 40건 처리시간 0.026초

${\cdot}$저준위 방사성폐기물 유리고화체의 물리${\cdot}$화학적 특성 연구 (Studies on the Physico-chemical Properties of Vitrified Forms of the Low- and Intermediate-level Radioactive Waste)

  • 김천우;박병철;김향미;김태욱;최관식;박종길;신상운;송명재
    • 한국세라믹학회지
    • /
    • 제38권9호
    • /
    • pp.839-845
    • /
    • 2001
  • 원자력발전소에서 발생하는 폐수지, 잡고체, 붕산폐액을 유리화 하기 위하여 폐기물별 조성을 바탕으로 유리조성 연구를 수행하였다. 폐수지, 잡고체를 각각 유리화 할 수 있는 두 개 의 후보유리 RG-1과 DG-1 그리고 폐수지, 잡고체, 붕산폐액을 혼합하여 처리할 수 있는 후보유리 MG-1을 개발하였다. 각 후보유리에 대해 운전변수, 고화체 품질, 가용 효과를 평가하였으며 일부 특성들은 실험실적으로 확인하였다. 운전 변수 가운데 유리의 점도와 전기 전도도는 세 후보유리 모두 적정운전 범위값 내에 만족하였으며 밀도, 화학적 견고성, 상안정성 등 고화체의 품질 또한 우수하였다. 개발한 유리 조성 연구를 바탕으로 폐수지, 잡고체, 혼합폐기물을 유리화 할 경우 감용비는 각각 21, 89, 75로 평가되었다.

  • PDF

한국원자력 연구소 실증소각시설에서의 저준위방사성폐기물 시험소각 (Trial Burns of Low-Level Radioactive Wastes the Demonstration-Scale Incineration Plant at KAERI)

  • Yang, Hee-Chul;Kim, In-Tae;Kim, Jeong-Guk;Kim, Joon-Hyung;Seo, Yong-Chil
    • Nuclear Engineering and Technology
    • /
    • 제27권5호
    • /
    • pp.767-774
    • /
    • 1995
  • 방사성 동위원소 추적자를 포함한 모의폐기물의 시험소각을 통하여 $^{60}$Co, $^{54}$Mn 및 $^{137}$Cs의 소각공정에서의 거동을 고찰하였다. 공정 내에서 비휘발성 방사성 핵종들인 $^{60}$Co 및 $^{54}$Mn의 거동은 입자상 물질의 거동과 유사하였다. $^{60}$Co 및 $^{54}$Mn의 제염계수(DF) 는 각각 4.7$\times$$10^{5}$ 및 6.2$\times$$10^{5}$ 이었다. 반휘발성인 핵종의 거동은 소각온도의 의존성을 보여주었다. 반휘발성 $^{137}$Cs의 제염계수는 85$0^{\circ}C$$700^{\circ}C$ 의 다른 소각온도에서 각각 2.8$\times$$10^3$, 2.6$\times$$10^4$이었다. 원자력 발전소(NPS) 고리 3, 4호 기에서 운반된 건조 방사성폐기물(DAW)에 대한 시험소각도 실시하였다. 폐기물에 포함된 총 베타 /감마 방사능에 대한 제염계수가 1.1$\times$$10^{5}$ 이었다. 앞의 추적자 시험의 결과 및 건조 고체폐기물 내 핵종분포에 기준을 둔 예상제염계수보다 다소 높은 값을 보였다. 굴뚝에서의 배출농도는 0.019 Bq /N $m^3$으로 기체상 배출물에 대한 최대허용농도(MPC)를 만족시킬 수 있었다.

  • PDF

비대면 미디 수업의 문제점과 개선 방안 연구 (A Study on Problems and Improvement Plans of Non-Face-to-Face Midi Classes)

  • 백성현
    • 한국엔터테인먼트산업학회논문지
    • /
    • 제15권4호
    • /
    • pp.267-277
    • /
    • 2021
  • 코로나 바이러스의 영향으로 교수자와 학습자는 비대면 수업을 해야 하는 상황이 되었다. 갑작스러운 상황에 충분한 준비를 하지 못한 상태에서 비대면 수업이 진행되었고 여러 가지 문제점들이 발생했다. 본 연구는 비대면 미디 수업 시 생기는 문제점을 파악하여 개선하고자 하였다. 연구 결과는 다음과 같다. 첫째, 대면과 비대면 수업 시 사용할 수 있는 기자재의 차이로 인한 문제점이 있었다. 이에 컴퓨터 운영 체제에 상관없이 설치 가능하고 기능에 제한 없이 무료 사용할 수 있는 DAW인 리퍼(Reaper)를 사용하는 것으로 개선 방안을 찾을 수 있었다. 둘째, 줌(Zoom)의 화면 공유 기능을 사용할 시 DAW에서 오디오 인터페이스의 드라이버를 선택할 수 없어 레이턴시(Latency)를 줄일 수 없는 문제점이 있었다. 교수자 관점에서는 오디오 아웃풋을 인풋으로 다시 받아 송출하는 방식으로 개선하였다. 또한 Windows 운영체제를 사용하며 오디오 인터페이스가 없는 학습자는 실습 시 레이턴시로 인한 불편함이 생기는데 Asio4all을 설치하여 레이턴시를 줄일 수 있었다. 셋째, 컴퓨터의 리소스 부족으로 화질 저하 및 화면 끊김 현상이 있었다. 이를 개선하기 위해 캡처 보드를 사용하여 2대의 컴퓨터를 연결하여 리소스를 분산하여 고화질을 유지하면서 화면 끊김 현상을 개선할 수 있었으며, 비엔나 앙상블 프로를 사용하여 1대의 컴퓨터를 더 연결하여 추가 리소스를 확보하여 더 많은 플러그인을 사용하면서 비대면 미디 수업을 할 수 있는 시스템 구축에 성공하였다. 연구 결과 비대면 미디 수업의 문제점을 파악하고 개선할 수 있었다.

IP형 운반용기 차폐해석-잡고체폐기물을 중심으로 (Shielding Analysis for Industrial Package: Focusing on Dry Active Waste)

  • 이강욱;조천형;장현기;최병일;이흥영
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2005년도 춘계 학술대회
    • /
    • pp.523-530
    • /
    • 2005
  • 본 연구에서는 IP형 운반용기의 개념설계를 위하여 소내 임시저장중인 방사성폐기물중 $200\;{\ell}$ 잡고체 드럼을 대상으로 운반용기에 적재 가능한 드럼의 최대표면선량률을 제시하고자 하였다. 이를 위해 잡고체 폐기물을 가연성과 비가연성으로 구분하였으며, 각각 혼합핵종이 균일 분포되어있는 경우와 단일핵종(Co-60)이 균일 분포되어있는 경우를 나누어 계산하였다. 연구결과, 가연성 잡고체 드럼에 혼합핵종이 분포되어 있는 경우, IP-1, IP-2-a, IP-2-b형 운반용기에 적재 가능한 최대표면선량률은 각각 3.60E-01, 8.85E-01, 1.27E+01 mSv/hr 이었으며, Co-60이 분포되어 있는 가연성 잡고체 드럼의 최대표면선량률은 각각 3.59E-01, 8.83E-01, 1.25E+01 mSv/hr 이었다. 비가연성 잡고체 드럼에 혼합핵종이 분포되어 있는 경우, IP-1, IP-2-a, IP-2-b형 운반용기에 적재 가능한 최대표면선량률은 각각 7.14E-01, 1.83E+00, 2.69E+01 mSv/hr이었으며, Co-60이 분포되어 있는 비가연성 잡고체 드럼의 최대표면선량률은 각각 7.13E-01, 1.81E-01, 2.62E+01 mSv/hr 으로 계산되었다. 이를 통해 운반가능 방사성내용물의 최대수량을 실측이 용이한 표면선량률 만으로 제시할 수 있었으며, 향후 다른 종류의 폐기물에 대해서도 차폐해석을 수행할 예정이다.

  • PDF

Bacterial $\beta$-Glucan Exhibits Potent Hypoglycemic Activity via Decrease of Serum Lipids and Adiposity, and Increase of UCP mRNA Expression

  • HONG KYUNGHEE;JANG KI-HYO;LEE JAE-CHEOL;KIM SOHYE;KIM MI-KYOUNG;LEE IN-YOUNG;KIM SANG-MOO;LIM YOONG HO;KANG SOON AH
    • Journal of Microbiology and Biotechnology
    • /
    • 제15권4호
    • /
    • pp.823-830
    • /
    • 2005
  • This study was undertaken to evaluate the effect of bacteria-derived $\beta$-glucan fiber on serum lipids, adiposity and uncoupling protein (UCP) expression in rats. In order to induce obesity, Sprague-Dawley weanling male rats were allowed free access to AIN-76A diet until 4 weeks of age, and fed high-fat diet (beef tallow, $40\%$ of calories as fat) for 6 weeks until 10 weeks of age. Rats were then fed with $0\%$ thigh- fat control group), $1\%$, or $5\%$ bacterial ~-glucan supplemented high-fat diets (w/w) for another 6 weeks. For comparison, normal control group was fed with AIN-76 diet $11.7\%$ fat). Supplementation with bacterial $\beta$-glucan resulted in a significant reduction of high-fat-induced white fat (i.e., visceral and peritoneal fat) development, adipocyte hypertrophy, and development of hyperinsulinemia and hyperleptinemia. Serum triglyceride, total cholesterol, and free fatty acid levels were greatly reduced, but, HDL-cholesterol concentrations were increased by bacterial $\beta$-glucan supplementation. Serum leptin level was lower in the $\beta$-glucan groups than in the high-fat group. The expression of UCPs (UCP1, UCP2, and UCP3) in brown adipose tissue (BAT) were significantly increased by $5\%$ bacterial $\beta$-glucan-containing diet. This study suggests that the anti-obesity effect of $5\%$ bacterial $\beta$-glucan is attributed to upregulation of UCPs and inefficient energy utilization.

Vitrification of Simulated Combustible Dry Active Wastes in a Pilot Facility

  • Yang, Kyung-Hwa;Park, Seung-Chul;Lee, Kyung-Ho;Hwang, Tae-Won;Maeng, Sung-Jun;Shin, Sang-Woon
    • Nuclear Engineering and Technology
    • /
    • 제33권4호
    • /
    • pp.355-364
    • /
    • 2001
  • In order to evaluate and finally optimize the vitrification condition for combustible dry active waste (DAW), dust and gas generation characteristics were investigated for PE, cellulose, and mixed waste Tests were conducted by varying the operation variables such as melter configuration, excess oxygen amount, and waste feeding rate. Results showed that dust generation characteristics were affected by the operation parameters and the melter's configuration is the dominant one. For all tested DAWs, dust generation was reduced by increasing the waste feeding rate and the excessive oxygen amount in the melter. Among waste types, dust amount was decreased by the order of mixed wastes, PE, and cellulose. Other parameters such as temperature variation and operation time have also affected the dust generation. The optimum condition for the DAW vitrification was determined as the melter's configuration equipped for minimizing the waste dispersion with 20 kg/h of waste feeding rate and 100% of excessive oxygen supply. CO gas concentration in the off-gas was immediately influenced by the combustion state in the melter, but showed similar trend as the dust generation. For the NOx production during the vitrification process, thermal NOx, which is generated from the Post Combustion Chamber (PCC), rather than fuel NOx was assumed to be dominant. The gas cleaning of efficiencies of the PCC, wet scrubber, and Selective Catalytic Reduction system (SCR) were found to be high enough to keep the concentration of pollutants (CO, NOx, SOx, HCI) in the stack below their relevant emission limits.

  • PDF

Palladium의 Embedded Atom Method 개발 (The Embedded Atom Method Analysis of the Palldium)

  • 정영관;김경훈;김세웅;이성희;이근진;박규섭
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.652-655
    • /
    • 2002
  • The embedded atom method based on the density functional theory is used for calculating ground state properties of realistic metal systems. In this paper, we had corrected constitutive formulae and parameters on the palladium for the purpose of doing Embedded Atom Method analysis. And then we have computed the properties of the palladium on the fundamental scale of the atomic structure. In result, simulated ground state properties, such as the lattice constant, elastics constants and the sublimation energy, show good agreement with Daw's simulation data and with experimental data.

  • PDF

한국원자력연구소 실증소각시설에서의 방사성폐기물 실증소각

  • 양희철;김인태;김정국;김준형;서용칠
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1995년도 춘계학술발표회논문집(2)
    • /
    • pp.827-832
    • /
    • 1995
  • 한국원자력연구소 실증소각시설의 성능 및 운전성을 입증하기 위하여 방사성동위원소를 포함한 모의폐기물 및 원자력발전소 발생 방사성폐기물에 대한 시험소각을 실시하였다. 비휘발성인 $^{60}$Co 및 $^{54}$Mn의 거동은 비산재의 거동과 거의 유사하였으며 각각의 제염계수는 4.7 x $10^{5}$및 6.2 x $10^{5}$이었다. 반휘발성인 $^{137}$Cs의 경우에는 8$50^{\circ}C$$700^{\circ}C$의 다른 소각온도에서 각각 2.8 $\times$ $10^4$, 2.6 $\times$ $10^3$으로 소각온도의 의존성을 보여주었다. 원자력발전소에서 운반된 건조 방사성폐기물(DAW)에 대한 시험소각은 성공적으로 수행되었다. 총 베타/감마 방사능에 대한 제염계수가 1.1 $\times$ $10^{5}$이었으며 결과적인 연돌에서의 배출농도는 0.019 Bq/N㎥으로 기체상 배출물에 대한 최대허용농도를 만족시킬 수 있었다.수 있었다.

  • PDF