• 트랜스-
• /
• 제8권
• /
• pp.55-78
• /
• 2020

대중음악 작곡가가 시도하는 다양한 작곡 방법 중에서도 DAW 소프트웨어를 통한 작곡 방법은 가장 많이 사용되는 방법일 것이다. 특히 K-POP 등의 상업 음악에 있어서 이러한 프로그램을 이용하여 작곡하는 비율은 절대적으로 높은 편이고, 이 과정에서 작곡가는 소프트웨어를 사용하기 전과는 전혀 다른 양상의 창작 과정을 거친다. 음악창작의 과정에서 DAW 소프트웨어의 사용자 인터페이스는 사용 편의성이나 시각적인 측면에서 작곡가의 창작 과정에 지대한 영향을 미친다. 본 연구는 Avid사의 Pro Tools에 나타난 UI에 내재된 특성을 음악창작 과정에서 미치는 실제적인 효과중심으로 분석한다. Pro Tools의 Edit Window에 나타난 UI 요소를 Grid, Track, Slip, Clip, Fade로 분류하여 각각을 모건의 예술 창작 과정의 네 단계이론을 통해 대입하는데, 이로써 DAW 소프트웨어의 시각적인 인터페이스가 어떻게 음악창작 현장에서 세부적으로 작용하는지 밝힐 수 있다.

• 보존과학연구
• /
• 통권11호
• /
• pp.87-105
• /
• 1990

Chemical and micro morphological changes of archaeological waterlogged woods from shipwrecked materials in marine situations were investigated which were submerged in seabed for over 900 years. Tested Wood species were Pinusdensiflora, Zelkova serrata, Quercus acutissima and Camellia japonica. The obtained results were summarized as follows; Chemical analysis showed that lignin content was increased, whereas the amout of holocellulose was heavily decreased in the degraded archaeological lwoods(DAW), when compared to the recent woods. The amount of alkalineextractives in the DAW was extremley high. IR spectra showed that disappearance of absortion band at $1,730㎝^-1$ intensity increase at 1,600, 1,500 and $1,270㎝^-1$ and the emergence of single band around $1,050㎝^-1$.Microscopic investigation showed that cell wall of latewood tracheids and fiber in the DAW were severely degraded while, early wood tracheids less degraded. Degradation in the cell wall was mainley occurred in $S_2$layer, while the middle lamella was the least degraded. The micro morphological characteristics of DAW were separation of secondary wall from middle lamella, cavities aligned with micro fibril angle in $S_2$layer and granular appearance of secondary wall by the bacterial attack.

• Journal of Oral Medicine and Pain
• /
• 제19권2호
• /
• pp.221-231
• /
• 1994

Age determination in children have been criticized because they rely on subjective estimations of tooth development, as seen in radiographs. This study was undertaken to obtain the objective estimation of developing teeth. The panoramic radiograph of 254 males and 254 females ranging from 6 to 14 years of age were studied. The structures measured were crown height, apex width and root length. The data weree statistically investigated with SPSS/PC + package. The results were as follows : 1. With the aid of a multiple regression model, a linear relationship between some of these distances and age was shown. 2. In th total material(6-14yr) and four-yr. intervals, linear equations are as follow : Boys : 6-14 age = 683 + 145.6 44RL + 126.6.45RL + 71.1 46DRL - 161.3 46DAW 6-10 age = 1202 + 72.6 46DRL + 100.2 44RL + 75.1 45RL 8-12 age = 3818 + 75.9 45RL - 190.9 44AW 10-14 age = 4151 + 58.6 45RL - 84.0 45AW - 130.6 44AW Girls : 6-14 age = 1587 + 104.9 45RL + 113.4 44RL - 233.1 46DAW + 81.4 47DRL - 255.9 46MAW 6-10 age = 1821 + 55.8 46DRL + 67.2 45RL - 184.2 46MAW + 56.3 44RL 8-12 age = 2435 + 68.2 45RLL + 71.3 44RL 10-14 age = 3485 + 49.9 47DRL - 51.3 45AW - 179.9 47DAW + 33.4 45RL + 39.4 44RL (DRL, length of distal root in molars. RL, root length in premolars. DAW, width of distal apex in molars. MAW, width of mesial apex in molars. AW, width of apex n molars)

• 방사성폐기물학회지
• /
• 제2권3호
• /
• pp.175-180
• /
• 2004

In order to vitrify the combustible dry active waste (DAW) generated from Korean Nuclear Power Plants, a glass formulation development based on waste composition was performed. A borosilicate glass, DG-2, was formulated to vitrify the DAW in an induction cold crucible melter (CCM). The processability, product performance, and volume reduction effect of the candidate glass were evaluated using a computer code and were measured experimentally in the laboratory and CCM. The glass viscosity and electrical conductivity as the process parameters were in the desired ranges. Start-up and maintaining glass melt of the candidate glass were favorable in the CCM. The product of the glass product such as chemical durability, phase stability, and density was satisfactory. The vitrification process using the candidate glass was also evaluated assuming that it was operated as economically as possible.

• Nuclear Engineering and Technology
• /
• 제29권3호
• /
• pp.218-228
• /
• 1997

Correlations between the amount of DAW (Dry Active Waste) generated from present Korean PWRs and their operating parameters were analyzed. As the result of multi-variable linear regressions, a model predicting the volume of DAW using the number of shutdowns ( $f_{FS}$ ) and total personnel exposure ( $P_{\varepsilon}$) was derived. Considering one standard error bound, the model could successfully simulate about 8575 of the real data. In order to predict the amount of DAW to be generated from a KNGR another model was derived by taking into account the additional volume reduction by supercompaction system. In addition, the volume of WAW (Wet Active Waste) to be generated from KNGR (Korean Next Generation Reactor) was calculated by considering conceptual design data and replacement effect of radwaste evaporator with selective ion exchangers. Finally, total volume of SRW (Solid Radioactive Waste) to be generated from KNGR was predicted by inserting design goal values of $f_{FS}$ and $P_{\varepsilon}$ into the model. The result showed that the expected amount of SRW to be generated from KNGR would be in the range of 33~44㎥. $y^{-1}$ . It was proved that the value would meet the operational target of KNGR proposed by KEPCO, that is, 50㎥. $y^{-1}$ .

• 방사성폐기물학회지
• /
• 제2권3호
• /
• pp.165-174
• /
• 2004

원자력발전소에서 발생하는 이온교환수지와 가연성잡고체 혼합폐기물을 유리화하기 위하여 유도 가열식 저온용융로를 이용한 실증시험을 수행하였다. 금속 티타늄 고리(Ti-ring)를 이용한 유리의 초기점화에 필요한 에너지는 약 290 kWh로 평가되었다. 혼합폐기물의 투입 중 고주파발생기의 출력은 160∼190 kW로 임피던스는 0.55∼0.65 $\Omega$ 범위 내에서 안정적으로 유지되었다. 이온교환수지 단독투입 시 보다 가연성잡고체와 혼합 할 경우 CO 발생농도는 1/40 정도로 낮아졌는데, 이는 1.8배 정도 높은 연소에너지를 갖는 가연성잡고체가 혼합폐기물의 완전연소를 유도한 것으로 평가되었다. 혼합폐기물의 공급량에 적당한 최적 산소 버블링에 의해 유리 용탕 내부로의 미연폐기물의 함침은 발생하지 않았으며 유리 용탕은 지속적으로 공정 건전성을 유지하였다. 유리 용탕의 부피가 증가하는 팽창(swelling) 현상 때와 정상 일 때 발생가스를 측정, 비교한 결과 swelling 현상 때는 NO와 같이 환원성 가스의 농도 보다 산화성 기체인 $NO_2$의 농도가 높은 것으로 나타났다. 실증시험에 사용된 이온교환 수지와 가연성잡고체의 각각 투입량은 368kg과 751kg 이었으며, 74 정도의 감용비를 달성하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.572-575
• /
• 1997

The embedded atom method based on density functional theory was developed as a new means for calculating ground state properties of realistic metal system by Murray S. Daw, Stephen M. Foiles and Michael I. Baskes. In the paper, we had corrected constitutive formulae and parameters on the nickel for the purpose of doing Embedded Atom Method analysis. And then we have computed the properties of the nickel on the fundamental scale of the atomic structure. In result, simulated ground state properties, such as the lattice constant, elastics constants and sublimation energy, show good agreement with Daw's simulation data and with experimental data.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.726-728
• /
• 2016

본 연구에서는 leap motion을 이용하여 실시간 MIDI controller를 설계하였다. Windows상에서 virtual MIDI port를 생성한 후 DAW(Digital Audio Workstation) 또는 VST(Virtual Studio Technology)와 해당 port와 프로토콜에 연결되어 통신을 수행한다. MIDI controller는 손동작 및 모양을 실시간으로 탐지해서 해당 데이터를 MIDI 데이터로 변환시킨다. 이 변환 된 데이터는 설정 된 포트와 미리 입력 된 MIDI CC(Control Change)에 따라 전송된다. 따라서 기존의 MIDI controller보다 유연한 MIDI 입력을 지원하는 목적을 가진다.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.576-581
• /
• 2002

원자력발전소에서 발생하는 이온교환수지와 잡고체를 동시에 처리하기 위하여 유도 가열식 저온용융로를 이용한 유리화 실증시험을 수행하였다. 유리 고화체의 화학적 내구성을 평가하기 위하여 최종 유리에 대해 수행한 PCT 침출 시험결과 기준유리 보다 내 침출성이 우수한 것으로 나타났다. 최종 유리 고화체에 대해 열처리 실험 결과 액상온도는 1048K (775$^{\circ}C$)로 측정되었다 유리 고화체에 대한 압축강도 측정 결과 규제치인 34kg/$\textrm{cm}^2$ 보다 약 90배 높은 값을 나타내었다. 저온용융로(CCM)의 하부, 중앙, 상부 유리 고화체의 미세구조 관찰 결과 이차상 없는 균질한 상태였다. 환원성 유기물을 함유한 이온교환수지에 잡고체를 동시 투입하여 자성 금속상 침전을 방지할 수 있었다. 유리화 실증시험을 통하여 감용비 74를 달성하였다.

• 대한치과교정학회지
• /
• 제47권3호
• /
• pp.167-175
• /
• 2017

Objective: To evaluate the differences in maxillomandibular transverse measurements at either the crown or the estimated center of resistance (CR), and to compare values between normal occlusion and Class III malocclusion groups. Methods: Dental casts and computed tomography (CT) data from 30 individuals with normal occlusion and 30 with skeletal Class III malocclusions were evaluated. Using the casts, dental arch widths (DAWs) were measured from the cusp tips, and basal arch widths (BAWs-cast) were measured as the distance between the points at the mucogingival junction adjacent to the respective cusp tips. The BAWs determined from CT (BAWs-CT) images were measured from the estimated CRs of the teeth. Results: None of the DAW measurements or maxillomandibular DAW differences showed statistically significant intergroup differences. In contrast, the maxillary BAWs-CT and BAWs-cast were lesser in the Class III malocclusion group than in the normal occlusion group. The mandibular BAWs-CT were significantly greater in the Class III malocclusion group than in the normal occlusion group. Moreover, the maxillomandibular BAW differences on both CT and cast showed significant intergroup differences in all transverse measurements. Conclusions: The maxillomandibular DAW differences showed no significant intergroup differences. In contrast, the maxillomandibular BAW differences on both CT and cast showed significant intergroup differences in all transverse measurements. The maxillomandibular BAW differences at the estimated CRs, measured using CT or casts, can reveal underlying transverse maxillary basal arch deficiencies in patients with skeletal Class III malocclusions.