• 제목/요약/키워드: DAD-IS

검색결과 156건 처리시간 0.034초

유산균 발효에 의한 소청룡탕의 발효 전 후 성분 변화 연구 (Analysis of Constituents in Socheongryong-tangs Fermented by Lactic acid bacteria)

  • 양민철;김동선;정상원;마진열
    • 한국한의학연구원논문집
    • /
    • 제17권3호
    • /
    • pp.115-121
    • /
    • 2011
  • Objective : The purpose of this study was to investigate the changes in the contents of constituents in Socheongryong-tang (CY) and its fermentations (FCY) with 10 species of lactic acid bacteria. Methods : Ten strains of lactic acid bacteria, Lactobacillus casei 127, L. acidophilus 128, L. casei 129, L. plantarum 144, L. amylophilus 161, L. curvatus 166, L. delbruekil subsp. lactis 442, L. casei 693, B. breve 744, and B. thermophilum 748, were used for the fermentation of Socheongryong-tang. The increased and decreased constituents were identified using HPLC/DAD and various liquid chromatographic techniques, and the structure was elucidated using NMR and MS. These compounds were quantitatively analyzed using an HPLC/DAD system. Results : The increased constituents were identified to be liquiritigenin (1) and cinnamyl alcohol (2), and the decreased constituent was determined to be liquiritin (3). Liquiritigenin (1) and cinnamyl alcohol (2) were increased in all of the FCYs, while liquiritin (3) was decreased. The fermentation of the ten lactic acid bacteria demonstrated that the decomposable rate of these three compounds in FCYs were different. Socheongryong-tang fermented by L. plantarum 144 and L. amylophilus 161 showed the most remarkable changes. Conclusions : CY could be increased antibacterial, neuroprotective, or antiinflammatory effect by fermentation with lactic acid bacteria, especially with L. plantarum and L. amylophilus, considering their known biological activities. In addition, it is expected that this study will help to establish quality control parameters for FCY.

철도차량내의 효율적인 인터넷 서비스를 위한 Stateless 기반의 Care of Address 구성방안 (The Stateless Care of Address Configuration Scheme To Provide an Efficient Internet Service in a Train)

  • 이일호;이준호
    • 한국컴퓨터정보학회논문지
    • /
    • 제14권9호
    • /
    • pp.37-46
    • /
    • 2009
  • 철도차량에 탑재된 이동 라우터(Mobile Router:MR)의 이동방향은 랜덤하게 이동하는 일반 무선단말기와 달리 선로를 따라 양방향 이동으로 제한된다. 따라서 이동라우터와 접속된 액세스 라우터 (Access Router:AR)은 인접한 이웃 AR의 주소정보를 이용하여 이동라우터의 2계층, 3계층 핸드오프 수행 전에 이동라우터 대신 미리 Care of Address(CoA)를 구성할 수 있다. 이동라우터는 현재 접속된 AR에서 어느 AR 영역으로 이동하더라도 이동검출과정 후 현지 AR로부터 새로운 CoA를 즉시 획득할 수 있게 된다. 성능분석결과, 제안한 방안은 Stateless 방식과 달리 별도의 CoA 과정과 주소중복확인절차(Duplicate Address Detection:DAD)를 수행하지 않아 Stateless 방식보다 최소 약 1.8(s), 최대 4.98(s) 빠르게 CoA를 획득할 수 있음을 확인할 수 있었다.

한국산 오디 품종별 안토시아닌 배당체 성분 분석 (Analysis of Anthocyanin Glycosides in Korean Mulberry Fruit Cultivars)

  • 김소아;권령하;김주형;라혜민;이지혜;조수묵;김헌웅
    • 한국식품영양학회지
    • /
    • 제36권6호
    • /
    • pp.543-550
    • /
    • 2023
  • Mulberry fruit is a superior source of polyphenols, especially anthocyanin, and has a long history of use as an edible fruit and traditional medicine. The anthocyanin composition of mulberry fruit from 15 Korean cultivars was analyzed by ultra-performance liquid chromatography diode array detector with quadrupole time of flight/mass spectrometry (UPLC-DAD-QToF/MS) based on a cyanin internal standard. The four glycosides were identified by comparison with authentic standards and published reports. The major anthocyanin was cyanidin 3-O-glucoside (71.7%), followed by cyanidin 3-O-rutinoside (26.6%). The minor components (total of 1.7%) were pelargonidin 3-O-glucoside and pelargonidin 3-O-rutinoside. The total anthocyanin content (mg/100 g, dry weight) of mulberry fruit varied by cultivar and ranged from 471.5±4.0 (Su Hong) to 4,700.2±54.0 (Gwa Sang2). Among the 15 cultivars examined, Gwa Sang2 showed the highest level of cyanidin 3-O-glucoside (3,133.4±32.6), which was 9-fold higher than that of Su Hong (351.5±3.4). In conclusion, anthocyanin profiles, including pelargonidin 3-O-glucoside and pelargonidin 3-O-rutinoside, were reported for the first time from 15 Korean mulberry fruit cultivars. The results will contribute valuable information on pharmaceutical properties, breeding superior mulberry cultivars, and food industries.

갠트리 크레인의 CAE 통합설계에 관한연구 (A Study on CAE Integrated Design of Gantry Crane)

  • 박경택;김두형;박찬훈;한동훈;홍성재
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 추계학술대회 논문집
    • /
    • pp.720-725
    • /
    • 1997
  • This paper is to study the wind effect of the large scale gantry crane. It is used to control the sway of gantry crane in the loadingiunloading job of containers. I'hls is very important in the automated container terminal because the sway of handling equipments in pard is caused by thc l~nexpected disturbance such as wind and dynamic inertia by deriving force. This study shows the process of the modelling simulation of the wind effect of the sway motion of the gantry crane. Pro-Engineer, ANSYS and DAD'; ~ rr . used for 3D solid modelling and dynamic simulation. Though this study did not use the real parameters. the ; cwl ~ shows the trend of the wind effect is very large in the large scale crane and should be considered in design of the large scale gantry crane. In future, if the study is done by using the real parameters, the result is much more ~ise!'ul for dynamic control and design of gantry crane.

  • PDF

DADS를 이용한 유연 다물체의 동응력 해석 (Dynamic Stress Analysis of Flexible Multibody using DADS)

  • 안기원;서권희;황원걸
    • 한국자동차공학회논문집
    • /
    • 제6권6호
    • /
    • pp.107-112
    • /
    • 1998
  • A great deal of time and effort are required to evaluate the safety and durability of a vehicle structure in the vehicle development stage. It is difficult to find the reasons for cracks which occur in the body and frame of a vehicle during tests. Recently computer aided engineering techniques have been utilized to solve the problems of safety and durability of vehicles. In this study, a dynamic stress analysis is performed on the frame of the vehicle by rigid and flexible multibody dynamics techniques. The result of the analysis is compared to that of the actual test. The full vehicle dynamic models for the rigid and flexible bodies are developed by DADS package. The modal coordinate system is used to save time for the dynamic stress analysis. The flexible multibody dynamic models have 12 normal modes considering the flexibility of the frame. Dynamic stresses arc calculated by relating the stress influence coefficients and the applied forces.

  • PDF

19th May 2011 Simav (Kütahya) earthquake and response of masonry Halil Aga Mosque

  • Ural, Ali
    • Earthquakes and Structures
    • /
    • 제4권6호
    • /
    • pp.671-683
    • /
    • 2013
  • The May 19, 2011 an earthquake hit Simav (K$\ddot{u}$tahya) province in Turkey. Simav is a district of K$\ddot{u}$tahya located 255 km southwest from capital city of Turkey. According to Turkish General Directorate of Disaster Affairs (DAD), the magnitude of this moderate earthquake was 5.7. The major percent of the housing stock in the affected region was built in masonry. Many masonry dwellings, mosques and also minarets were heavily damaged due to this seismic activity. The Halil Aga Mosque and its minaret were also heavily damaged as a masonry structure around the earthquake region. In this paper, a site survey of masonry damages is presented and Response Spectrum Analysis of the Halil Aga Mosque is performed using the finite element method.

Simulation of Child Care for First-time Father

  • Jang, Sin-young
    • International journal of advanced smart convergence
    • /
    • 제8권2호
    • /
    • pp.47-55
    • /
    • 2019
  • In past patriarchal societies, childbearing was considered the sole possession of women. At a time when women were struggling to move into society, the concept of parenting as the mainstay of the capitalist economic society and the head of the family has naturally been taken for granted by a woman named "housewife." Since the role of male babies is as important as that of females, Fathers are trying to promote the importance of the effects of fathers due to active participation in childcare and help change old perceptions of the past. Men also know the importance of participating in childcare in early childhood, but often do not know what their children want or why they cry due to lack of basic child care knowledge and lack of education. We tried to give fathers the meaning of indirect experience and change their perception of parenting by producing interactive VR content, which is completed with dad's participation, so that they can experience the child in person. In addition, through familiar childcare professional product advertisement and 360 degree stereo sound. It is made to immerse in the game to gain persuasive effect, inducing fathers to have interest and interest in childrearing.

Effect of Extraction Condition on the Content of EGCG and Caffeine of Green Tea: Comparison with the Inhibitory Activity on Pancreatic Lipase

  • Lee, Eun Song;Lee, Mi Kyeong
    • Natural Product Sciences
    • /
    • 제19권2호
    • /
    • pp.166-172
    • /
    • 2013
  • Caffeine and epigallocatechin gallate (EGCG) are major constituents of green tea, the leaves of Camellia sinensis (Theaceae). Although EGCG is well known for diverse beneficial effect, caffeine is sometimes harmful with adverse effects. Therefore, the extraction efficiency was investigated using different extraction method such as extraction solvent, extraction time, extraction method, and repeated extraction. The content of EGCG and caffeine in green tea extract was quantitated by HPLC analysis. The extraction condition exerted difference on the extraction yield. The content of EGCG was also affected by different extraction condition. Especially, the extraction solvent greatly affected the content of EGCG in the extract. However, the content of caffeine was less affected compared to that of EGCG. The inhibitory effect of green tea extract on pancreatic lipase was almost similar regardless of extraction condition. Taken together, optimization of extraction condition will provide best efficacy for further development of green tea as anti-obesity therapeutics.

Water-Side Oxide Layer Thickness Measurement of the Irradiated PWR Fuel Rod by ECT Method

  • Park, Kwang-June;Chun, Yong-Bum
    • Nuclear Engineering and Technology
    • /
    • 제29권2호
    • /
    • pp.175-180
    • /
    • 1997
  • It has been known that eater-side corrosion of fuel rods in nuclear reactor is accompanied with the metallic loss of wall thickness and hydrogen pickup in the fuel dadding tube. The fuel dad corrosion is one of the major factors to be controlled to maintain the fuel integrity during reactor operation. An oxide later thickness measuring device equipped with ECT probe system was developed by KAERI, and whose performance test was carried out in NDT(Non-destructive Test) hot-cell or PIE(Post Irradiation Examination) Facility. At first, the calibration/performance test was executed for the unirradiated standard specimen rod fabricated with several kinds of plastic thin films whose thickness ore predetermined, and the result of which showed a good precision within 10% of discrepancy. And then, hot test us peformed for the irradiated fuel rod selectively extracted from J44 fuel assembly discharged from Kori Unit-2. The data obtained with this device were compared with the metallographic result obtained from destructive examination in PIEF hot-cell on the same fuel rod to verify the validity of the measurement data.

  • PDF