• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.4-5
• /
• 2019

본 논문은 DC마이크로그리드에서 저전압 배터리 에너지 저장 시스템과 DC 버스 연결을 위한 Dual Active Bridge(DAB) 컨버터의 제어 방법에 대한 연구이다. DC 마이크로그리드에서 전력을 효율적으로 사용하기 위해 양방향 전력전달이 쉬운 DAB 컨버터는 많이 사용되고 있다. 다만, 낮은 배터리 저장 시스템을 사용하는 경우 과도상태에서 DC 버스 측 커패시터를 충전하기 위해 높은 돌입전류가 발생하게 된다. 이러한, 높은 돌입전류는 시스템의 전력반도체 소자를 파손시키는 문제를 가져온다. 따라서, 초기 돌입전류를 저감시킬 수 있는 소프트 스타트 알고리즘이 필요하다. 본 논문에서는 돌입전류 저감을 위한 소프트 스타트 알고리즘을 제안하고, 3kW급 DAB 컨버터의 실험 결과를 바탕으로 제안 된 알고리즘을 검증하였다.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.228-237
• /
• 2003

Eureka-147 DAB(Digital Audio Broadcasting) system on which DMB(Digital Multimedia Broadcasting) system is based, was designed for the requirements of CD qualify audio with ${10}^{-4}$ bit error rate. Audio program may be primary service in DAB system, but multimedia program can be primary service in DMB system. Therefore, the bit error rate required must be below ${10}^{-7}$∼${10}^{-8}$ to transmit multimedia data via DMB channel. In order to meet the requirements and keep backward compatibility of DAB system we propose an outer channel coding scheme using Reed-Solomon coding and convolutional interleaving. This paper shows the simulation results for DMB channel performance based on mobile channel model. Also, it describes the needs and the effects of the outer channel coding.

• Journal of Sensor Science and Technology
• /
• v.12 no.3
• /
• pp.128-138
• /
• 2003

In this paper, we proposed the algorithm for locating destination address block (DAB) from automatic system to classify packages. For locating DAB, because the size of obtained images is are very large, we select the region of interesting (ROI) to reduce time carrying into algorithm. After selecting the ROI, proposed algorithm is carried out within the ROI. We extract the outline of the handwriting part of the DAB and the rest components within the obtained ROI using thresholding. We carry out labeling to extract each connected component for extracted outline and the rest components. We extract the outline of the handwriting part of the DAB using the geometrical characteristic of the outline of the handwriting part of the DAB among many connected components. The last, we extract the locating DAB using the outline of the handwriting part of the DAB.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1650-1660
• /
• 2016

This paper proposes a compensator to eliminate the DC bias of inductor current. This method utilizes an average-current sensing technique to detect the DC bias of inductor current. A small signal model of the DC bias compensation loop is derived. It is shown that the DC bias has a one-pole relationship with the duty cycle of the left side leading lag. By considering the pole produced by the dual active bridge (DAB) converter and the pole produced by the average-current sensing module, a one-pole-one-zero digital compensation method is given. By using this method, the DC bias is eliminated, and the stability of the compensation loop is ensured. The performance of the proposed compensator is verified with a 1.2-kW DAB converter prototype.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.219-222
• /
• 2002

This Paper presents the RF protection ratios required by NTSC TV video signal against Eureka-147 digital audio broadcasting signal interferer which is draft domestic specification of terrestrial digital audio broadcasting.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.269-275
• /
• 2014

The DAB system was designed to provide CD quality audio and data services for fixed, portable and mobile applications with the required BER below $10^{-4}$. However for the T-DMB system with the video service of MPEG-4 stream, BER should go down $10^{-8}$ by adding FEC blocks which consist of the Reed-Solomon (RS) encoder/decoder and convolutional interleaver/deinterleaver. In this paper we propose two types of turbo coded T-DMB system without altering the puncturing procedure and puncturing vectors defined in the standard T-DMB system for compatibility. One(Type 1) can replace the existing RS code, convolutional interleaver and RCPC code by a turbo code and the other one (Type 2) can substitute the existing RCPC code by a turbo code. Simulation results show that two new turbo coded systems are able to yield considerable performance gain after just 2 iterations. Type 2 system is better than type 1 but the amount of performance improvement is small.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.994-1002
• /
• 2019

In this paper, we propose the development of a power conversion system for electric power take-off (e-PTO) of agricultural electric vehicles. Most e-PTOs use commercial power $220V_{AC}$. A bidirectional power conversion system having a two-stage structure consisting of a DC-DC converter and a DC-AC inverter for supplying a high output voltage using a low battery voltage of an agricultural electric vehicle is suitable. we propose a power conversion system consisting of the one-stage dual active bridge (DAB) converter and the two-stage bidirectional full bridge inverter. In addition, we propose a soft start algorithm for reducing the inrush current generated by the link capacitor charging during the initial operation. A 3kW prototype system and its corresponding algorithms have been implemented to verify its effectiveness through experiments.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.653-656
• /
• 2004

This paper presents an effective algorithm for inserting an MPEG-2 transport stream (TS) into a Digital Audio Broadcasting (DAB) ensemble without any bandwidth waste in a Digital Multimedia Broadcasting (DMB) transmission system. The key technologies of this algorithm include packet rate control and program clock reference correction, which are important for TS processing. The proposed algorithms are applied to the various DMB transmission systems based on Eureka-147, and the performance of the proposed algorithm is confirmed through the experimental DMB broadcasting.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.267-270
• /
• 2003

The DMB recently standardized in Korea is a Eureka-147 DAB(Digital Audio Broadcasting)-based standard which is able to provide multimedia services including moving pictures, still images, text and etc. That has the structure to add the MPEG media codec and the MPEG system, namely, video-multiplexer to the DAB system. In this paper, we analysis the video-multiplexer of the DMB standard and propose a new multiplexer, namely. M4GM(MPEG-4 General Mux) included in the DMB vido-multiplexer for the performance improvement with respect to the transmission efficiency and the expansible functions. In addition, we simulate the two video-multiplexers and then compare and estimate their performance entirely.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.4
• /
• pp.336-344
• /
• 2017

This paper presents the three-port DC-DC converter modeling and controller design procedure, which is part of the solid-state transformer (SST) to interface medium voltage AC grid to bipolar DC distribution network. Due to the high primary side DC link voltage, the proposed converter employs the three-level neutral point clamped (NPC) topology at the primary side and 2-two level half bridge circuits for each DC distribution network. For the proposed converter particular structure, this paper conducts modeling the three winding transformer and the power transfer between each port. A decoupling method is adopted to simplify the power transfer model. The voltage controller design procedure is presented. In addition, the output current sharing controller is employed for current balancing between the parallel-connected secondary output ports. The proposed circuit and controller performance are verified by experimental results using a 30 kW prototype SST system.