• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.450-456
• /
• 2010

In the high-speed packet service, next generation mobile communication system has emerged as a major feature. If the fire of these high-speed kit services and non-continuous transmission of data due to the symmetrical nature of daeyiteo traffic for D-CDMA system has been actively studied. Small amounts of data moving in the uplink, but the real-time video downlink transmission, such as downloading large files to move data and services to those with asymmetric traffic characteristics, a system that can efficiently handle the data requirements be. Of 3GPP TDD(Time Division Duplex) scheme based on CDMA and TDMA in a way by introducing the concept through the proper allocation of time slots that can handle asymmetric traffic efficiently, has an advantage. TD-CDMA system by considering the characteristics of the frame configuration of transmission methods, such as physical channel structure and channel coding has been investigated. In addition, the HARQ scheme TD-CDMA system performance is analyzed by comparing them.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1602-1609
• /
• 1998

In this paper, the design and implementation of the novel RF front end circuit for CDMA based PCS phone is described. This novel scheme is realized by building the power amplifier module combined with duplexer. The dielectric filters which are parts of duplexer are broken up and relocated into the module. Electromagnetic analysis for via holes and coupling between narrow transmissio lines is icluded to design a circuit. The combined moule has been minimaturized to be as small as 1.5CC. It has satisfied IS-95 requirements for linearity performances of CDMA signal at 24-dBm output power as well as played apart as a duplexer. The operating current of about 95mA has been saved owing to both rearranging dielectric filters and limiting operating point to class-B by considering real working power range of CDMA phones.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.9-15
• /
• 2004

We propose optimal interference rejection weight for multistage parallel nulling (MPN) partial parallel interference cancellation (PPIC) receiver previously proposed to enhance the performance of V-BLAST for downlink multiple-input multiple-output (MIMO) multicarrier (MC)-code division multiple access (CDMA) systems. MPN-PPIC method proposed in [1] was based on the parallel interference cancellation (PIC) with fixed interference rejection weight obtained experimentally. However, the fixed weight can not be adapted to various systems efficiently, thus we proposed method for the optimal interference rejection weight based on the received signal to interference and noise ratio (SINR), and the performance of the proposed method was evaluated through computer simulation comparing with the previous method. We obtained performance gains of 2.5 dB ~ 5 dB for BER of 10$^{-3}$ .

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.932-939
• /
• 1998

In this paper, we analyze the performance of a multicode-CDMA system which have been proposed for the multimedia communications. The performance of a multicode-CDMA system, providing good spectrum efficiency as well as serving various bit rates, is analyzed with multipath, frequency selective, slowly fading Rayleigh channel. Also the proposed scheme adopting RAKE receiver with MRC(Maximal Ratio Combine) is advantageous to multipath channel. For a practical channel modeling, the JTC(Joint Technical Committee) recommended channel model(JTC(AIR) 23-065R6) is applied to simulation. The proposed schemehas serial-to-parallel convertor which splits input data stream of 2 Mits/s into 20 branches o 100 kbits/s. From the result of simulation, the case of RAKE receiver with 3 fingers to reduce the system complexity required the relatively large $E_{b}/N_O$ of 0 dB~1.5 dB, compared to the case of RAKE receiver with the number of path finger to keep the average error rate to be $1{\times}10^{-3}$ in channel A.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.31-34
• /
• 1998

CDMA base station SAW filter has been designed and fabricated successfully. Through the computer simulation, SAW filter is designed to have center frequency of 69.99MHz, ripples lower than 0.7dB and rejection level lower than 50dB. To obtain low noise band pass SAW filter, Input electrode has a apodization type and output electrode has a withdrawal type. For the fabrication of the SAW filter, Al thin film is deposited to the quartz substrates. The fabricated SAW filter has center frequency of 70.5MHz, ripples of 1dB and rejection level of 45dB.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.49-53
• /
• 2000

본 논문에서는 로그노말 분포된 전파음영 환경에서 통화의 신뢰도를 유지하기 위해 필요한 링크 마진을 경로손실과 전파음영의 감쇠를 포함하는 전파 손실 모델을 사용하여 분석하였다. CDMA 셀룰러 시스템에서 셀 반경이 커지게 되면 요구되는 링크 마진도 증가하게 되어 핸드오프이득은 요구되는 링크 마진만큼 감소하게 된다. 이러한 셀 영역과 링크 마진과의 관계를 하프 핸드오프와 소프트 핸드오프로 나누어 수치해석을 통해 살펴보았다. outage 확플이 0.1이고 셀 반경을 5-10% 증가시켰을 때 전력제어를 한 경우의 셀 영역비는 3.22 dB-3.99 dB, 전력제어를 하지 않은 경우의 셀 영역비는 2.55 dB-2.85 dB 만큼 증가하는 것을 알 수 있다.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.2
• /
• pp.86-92
• /
• 1998

In this paper, it is derived the system design parameters for the J-STD-018 of the PCS mobile station(MS) minimum performance using DS/CDMA analyzed the system performance due to the receiver components. The simulation shows the selectivity is -70.96dB at 1.25MHz frequency offset from the carrier frequency while the MS noise figure to satisfy J-STD-018 is 10dB and the input 3rd harmonics intercept point of the MS class I and MS class II-V is -9.5dBm and -14dBm respectively. When the interference power level at the receiver is small, the receiver has better performance as we increase the gain of LNA. However, when the interference level at the receiver is large, the receiver performance is decreased by the effect of the spurious. Thus, the effectiveness of LNA On/Off switching technique is proved as to reduce the effect of the spurious.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.902-907
• /
• 2001

In this paper, we analyzed BER performance of the MC DS-CDMA system and evaluated the degree of performance improvement of the system caused by adopting turbo code recently receiving much attention due to its powerful coding capability. As a result of analysis, it was found that the MC DS-CDMA system without any powerful coding scheme can not serve voice quality $(BER : 10^{-3}$ regardless of the number of users and the value of $(BER : 10^{-3)$ in Rayleigh fading channel. On the other hand, it was found that the MC DS-CDMA system adopting turbo code for performance improvement, shows improved BER performance and can serve voice quality without regard to the number of users and the value of $(BER : 10^{-3)$ in the same channel. For example, when $(BER : 10^{-3)$ is l0dB and the number of users was 10, the MC DS-CDMA system adopting turbo code showed improved BER performance about $5\times10^{-3}$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.227-232
• /
• 2000

This study applied asynchronous W-CDMA(3GPP) system that is suggested as an access method of IMT-2000, multimedia communication in next generation, and estimated fading channel by using pilot symbol different from traditional IS-95. And then, it applied PIC(Parallel Interference Cancellation) as multiple access interference cancellation and analyzed performance depending on the power rate between DPCCH(Control) and DPDCH(Data). As a result of simulation, it showed the best performance in C:D = 3:7 and 4:6, where set up as five users in case of hand design, and showed the best performance in C:D = 3:7, where did as ten users.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.7
• /
• pp.18-27
• /
• 1997

A CMOS 950 MHz frequency synthesizer is designed and fabricated in a 0.8.mu.m standard CMOS process for IS-95-A CDMA mobile communication transceivers To utilize a CMOS ring VCO in a CDMA wireless communication receisver, we employed a QDC (quasi-direct conversion) receiver architecture for CDMA applications. Realized RF frequency synthesizer used as the RF local oscillator for a QDC receiver exhibits a phase noise of -92 dBc/Hz at 885kHz offset from the 950.4 MHz carrier, which complies with IS-95-A CDMA specification. It has a rms jitter of 23.7 ps, and draws 30mA from a 5V supply. Measured I/Q phase error of the 950.4 output signals is 0.7 degree.