• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.18-18
• /
• 2009

본 논문은 X8R 온도 특성을 가지는 유전체 원료를 이용하여 고용량이면서 고압화가 가능한 적층 칩 캐패시터를 제작하였다. 대형 고압용 적층 칩 캐패시터를 위한 내부 전극 설계 및 외부 전극 형성 방법에 대한 연구도 함께 진행하였다. 적층 칩 캐패시터를 하이브리드 자동차 및 산업용 인버터의 DC-Link으로 사용하기 적합한 모듈을 제작하였으며 모듈 설계시 고유전율의 에폭시-세라믹 필름을 하였다. 본 모듈을 평가한 결과 기존 캐패시터 모듈에 비하여 2/3 크기의 소형화를 얻을 수 있었으며 ripple 전류 및 발열 특성이 매우 우수함을 확인하였다.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.2
• /
• pp.67-76
• /
• 2013

Under an imperfect channel estimation, a Device-to-Device (D2D) communication framework based on MIMO relay technology is presented. The model consists of a D2D pair equipped with M antennas and a relay equipped with N antennas as well as a cellular user equipped with M antennas. The outage probability under different relaying protocols (i.e. AF and DF protocol) with and without considering a direct link was derived. The actual and theoretical outage probability of the five links under different antenna numbers was emulated. The number of user antennas and channel estimation error was analyzed carefully to determine their impact on the outage probability of a system. The simulation verified the theory analyses and the results showed that MIMO relaying improves the D2D communication system performance.

• Journal of Biomedical Engineering Research
• /
• v.29 no.3
• /
• pp.187-190
• /
• 2008

This paper presents two dimensional receiving coils to provide hundreds of milli-watt power via inductive link to in vivo robotic capsules, whose orientation are practically undetermined. The wireless power transmission system consists of a transmitter powered by class E power amplifier, and a receiver with three dimensional antenna, rectifier, and voltage regulator. As the 2D lateral antenna construction is more critical for the receiving antenna, two types of 2D antennas are introduced and evaluated by theoretic and experimental analyses. Experimental results verifies that the cross-type construction show better directional performance for receiving power than the cylindrical one for the 2D antenna. The former could deliver the power homogeneously regardless of its orientation, with less than 20 % of variation from the possible maximum power.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.31-32
• /
• 2010

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.383-392
• /
• 2017

This paper introduces a real-time 3D model generation system that can process in real time from multi-view image acquisition to image-based 3D model generation. This system describes how to collect, transmit, and manage the HD images input from 18 cameras and explain the background separation and smooth 3D volume model generation process. This paper proposes a new distributed data transmission and reception method for real-time processing of HD images input from 18 cameras. In addition, we describe a codebook-based background separating algorithm and a modified marching cube algorithm using perspective difference interpolation to generate smooth 3D models from multi-view images. The system is currently being built with a throughput rate of 30 frames per second.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.973-974
• /
• 2012

• ETRI Journal
• /
• v.38 no.2
• /
• pp.227-234
• /
• 2016

Herein, we demonstrate clipping distortion suppression of directly modulated multi-IF-over-fiber links using a simple shunt diode predistorter. The dynamic range of a directly modulated analog fiber optic link is limited by nonlinear distortions caused by laser-diode clipping. We investigate the link performance in the context of carrie-to-noise and distortion ratio (CNDR) and error vector magnitude (EVM) requirements when supporting LTE-A services. We also design an analog predistorter with a shunt-diode structure, and demonstrate experimentally that the predistorter has the ability to suppress clipping-induced third-order intermodulation distortions of the link by at most 14 dB. It also improves the CNDR and EVM of the 4-IF-multiplexed LTE-A carriers by 7 dB and 2.9%, respectively.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.123-128
• /
• 2007

SPWPM traditional software development is surveyed and essential problems are investigated on the basis of system wireless link considerations. This paper presents the current state software planning tools for wireless LAN link optimization. The software directory is based on combination of MatLab and MapInfo software and measurement which gives the best grouping parameters to build up the software development. Among the requirements assumed, the WLAN site selections must be Line-of-sight (LOS) or near line of sight (NLOS) field strength prediction for either point to point or point to multi points. The results obtainable the out put of the program include two-dimensional (2D) and three dimensional (3D) plots for creating the link; design parameters through GUI representing the height and location for each antenna is depending on K-factor of the area and transmit antenna location.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.40-47
• /
• 2015

We propose a method to provide a selective VoD service during live streaming sessions. In the proposed method, each peer joined the live streaming session receives video stream packets with P2P manner and stores the packets to provide a VoD service. To mitigate the overhead of each peer node to store the video stream packets, the proposed scheme categorizes peers into three different groups based on their link types. To increase data gathering speed and reduce the network load, we also proposes the P2P transmission scheme within the same AP network for the peers with Wi-Fi link. To evaluate the performance of the proposed method, we implement computer simulator using NS-3. Simulation results show that the proposed method reduces the overhead about 66% and increases the P2P data gathering speed about 50% compared to the conventional schemes.

• Journal of the Korean Society of Safety
• /
• v.6 no.3
• /
• pp.35-39
• /
• 1991

Concentrically braced frames are limited in their ability to absorb energy during an earthquake However by placing the bracing members eccentric to the beam column joints, an energy absorbing link unit is produced. The energy is absorbed by the link and / or columns deforming inelastically. Three models of a multistorey structure were analyzed using DRAIN-2D computer program .Three link lengths were used in the analyses, 7, 11 and 15 inches. The yield patterns are produced. However it is interesting to note the relative valuses of force and moment obtained.