• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.185-188
• /
• 2001

본 논문에서는 의복의 2D패턴을 구성하여, 3D모델을 자동생성하는 방법을 제안한다. 먼저, 의복의 2D CAB 패턴으로부터 여러가지 의복 2D모델을 자동생성한 후, 의복 패턴별 2D모델을 붕합(Seaming)하여 3D모델을 생성한다. 봉합과정에서 B-Spline을 이용하여 인체의 굴곡과 의복의 공극을 고려하여 의복착용 후의 3D모델을 재구성하고, Z-buffer를 개량한 저리버퍼를 사용한 선적분을 통하여 3D모델을 구성하고 있다. 이때 의복의 3D 모델의 구조에 따라 부분적으로 의복 표면의 인체가 노출되는 현상을 검색하여( Collision Detection ), 의복 3D 모델을 부분적으로 수정하고 있다. 나아가서, 의복 원단에 대한 텍스처DB를 구축하여 다양한 색상의 의복을 코디할 수 있다.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.5
• /
• pp.19-26
• /
• 2019

In this paper, we consider the D2D Transmitter(Tx) and Receiver(Rx) pair assignment problem in the cellular system. Sharing the resource of the cellular system, D2D users may cause interference to the cellular system, though it is beneficial to improve the D2D user Capacity. Therefore, to protect the cellular users, D2D transmit power should be carefully controlled. Previously, optimal Tx-Rx assignment to minimize the total transmit power of users was investigated. Accordingly, the iterative algorithm to find the optimum Tx-Rx asignment was obtained. In this work, we consider the case where Tx group users becomes Rx group users, and Rx group users become Tx group users. We prove that the Tx-Rx assignment problem has the duality property. We present the numerical examples that show the duality between U-link and D-link.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1232-1236
• /
• 2013

The Cu cation binding sites of $[Cu(I){\cdot}d(CpG){\cdot}d(CpG)-2H]^{-1}$ complex have been investigated to explain the $[Cu{\cdot}DNA]$ biological activity caused by the Cu association to DNA. The structure of $[Cu(I){\cdot}d(CpG){\cdot}d(CpG)-2H]^{-1}$ complex was investigated by electrospray ionization mass spectrometry (ESI-MS). The fragmentation patterns of $[Cu(I){\cdot}d(CpG){\cdot}d(CpG)-2H]^{-1}$ complex were analyzed by MS/MS spectra. In the MS/MS spectra of $[Cu(I){\cdot}d(CpG){\cdot}d(CpG)-2H]^{-1}$ complex, three fragment ions were observed with the loss of d(CpG), {d(CpG) + Cyt}, and {d(CpG) + Cyt + dR}. The Cu cation binds to d(CpG) mainly by substituting the $H^+$ of phosphate group. Simultaneously, the Cu cation prefers to bind to a guanine base rather than a cytosine base. Five possible geometries were considered in the attempt to optimize the $[Cu(I){\cdot}d(CpG){\cdot}d(CpG)-2H]^{-1}$ complex structure. The ab initio calculations were performed at B3LYP/6-31G(d) level.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.369-375
• /
• 2011

Design is important in the IT, digital appliance, and auto industries. Aesthetic and art images are being applied for better quality of the products. Most image patterns are complex and much lead-time is required to implement them to the product design process. A precise reverse engineering method generating 2.5D engraving models from 2D artistic images is proposed through the image processing, NURBS interpolation and 2.5D reconstruction methods. To generate 2.5D TechArt models from the art images, boundary points of the images are extracted by using the adaptive median filter and the novel MBF (modified boundary follower) algorithm. Accurate NURBS interpolation of the points generates TechArt CAD models. Performance of the developed system has been confirmed through the quick turnaround 2.5D engraving simulation linked with the commercial CAD/CAM system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.5-12
• /
• 2008

There are some ways to improve precision of conventional munitions by low-cost method. 2D Course Correction Munition(CCM) is one of those ways, which is a 155mm projectile integrated with 2D Guidance Fuze(GF) instead of conventional fuze. 2D GF can correct the projectile trajectory and minimize range and deflection errors from its aimpoint using canard control. In this paper 2D CCM system concept is introduced and its course correction capability is analyzed using PRODAS.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.17-22
• /
• 1999

In this study, corneal power and eye refraction error were studied on myopic of unaccommodated koreans. The mean of refraction error power is -2.39D(male : -2.75D, female : -2.02D). The mean of corneal refraction error power is +43.90D(male : +44.07D, female : +43.71D). It is +0.90D higher than that of the model eye by Gullstrand(about + 43.00D).

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.220-223
• /
• 2010

최근 연이은 3D 영화의 성공에 힘입어 영화 산업계를 중심으로 3D 콘텐츠 생성이 늘고 있으며, 이를 가정 내에서도 즐길 수 있도록 다양한 3DTV가 출시되고 있다. 그러나 3DTV의 특성 상 3D 재생 시 밝기 저하에 따른 색 재현 문제로 인하여 입체감과 공간감을 느끼는 대신 2D에서의 화려한 색감을 만끽할 수 없게 되었다. 이에 본 논문은 3D 시청 시에도 2D에서와 같은 색감을 최대한 제공하기 위한 방법에 대해 연구하였다. 이를 위하여 3DTV를 활용하여 입력 RGB 영상에 대하여 2D와 3D 재생 시 재현되는 RGB intensity를 측정한 후 입출력에 따른 관계 모델링을 실시하였고, 모델링에 근거하여 3D 재생 시 2D 대비 보정되어야 할 색상 요소에 대한 매핑 테이블(mapping table)을 생성하였다. 생성된 매핑 테이블은 기존 3DTV 시스템의 출력부에 3D 색상 보정 모듈로써 추가하도록 하여 일반 2D 재생 시에는 입력영상이 바이패스(bypass)되도록 하고, 3D 재생 시에는 본 논문에 의한 3D 색상 보정용 매핑 테이블을 통해 색상 보정 과정을 수행하도록 하여 3D 재생 시에도 2D에서 느낄 수 있는 색감을 재현할 수 있도록 하였다.

• Clinical and Experimental Pediatrics
• /
• v.54 no.2
• /
• pp.51-54
• /
• 2011

Vitamin D is present in two forms, ergocalciferol (vitamin $D_2$) produced by plants and cholecalciferol (vitamin $D_3$) produced by animal tissues or by the action of ultraviolet light on 7-dehydrocholesterol in human skin. Both forms of vitamin D are biologically inactive pro-hormones that must undergo sequential hydroxylations in the liver and the kidney before they can bind to and activate the vitamin D receptor. The hormonally active form of vitamin D, 1,25-dihydroxyvitamin D3 $[1,25(OH)_2D]$, plays an essential role in calcium and phosphate metabolism, bone growth, and cellular differentiation. Renal synthesis of $1,25(OH)_2D$ from its endogenous precursor, 25-hydroxyvitamin D (25OHD), is the rate-limiting and is catalyzed by the $1{\alpha}$-hydroxylase. Vitamin D dependent rickets type I (VDDR-I), also referred to as vitamin D $1{\alpha}$-hydroxylase deficiency or pseudovitamin D deficiency rickets, is an autosomal recessive disorder characterized clinically by hypotonia, muscle weakness, growth failure, hypocalcemic seizures in early infancy, and radiographic findings of rickets. Characteristic laboratory features are hypocalcemia, increased serum concentrations of parathyroid hormone (PTH), and low or undetectable serum concentrations of $1,25(OH)_2D$ despite normal or increased concentrations of 25OHD. Recent advances have showed in the cloning of the human $1{\alpha}$-hydroxylase and revealed mutations in its gene that cause VDDR-I. This review presents the biology of vitamin D, and $1{\alpha}$-hydroxylase mutations with clinical findings.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.76-77
• /
• 2022

In this paper, we propose a method to stabilize the 3D pose estimation result of a 3D volumetric data sequence by matching the pose estimation results from multi-view. Draw a circle centered on the volumetric model and project the model from the viewpoint at regular intervals. After performing Openpose 2D pose estimation on the projected 2D image, the 2D joint is matched to localize the 3D joint position. The tremor of 3D joints sequence according to the angular spacing was quantified and expressed in graphs, and the minimum conditions for stable results are suggested.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_4
• /
• pp.1195-1207
• /
• 2020

With the development of GeoWeb technology, 2D/3D spatial information services through the web are also has been used increasingly in the application of disaster management. This paper is suggested to construct a web-based 3D geo-spatial information mapping platform to visualize various spatial information collected at the disaster site in a web environment. This paper is presented a web-based geo-spatial information mapping service plan for the various types of 2D/3D spatial data and large-volume LiDAR point cloud data collected at the disaster accident site using HTML5/WebGL, web development standard technology and open source. Firstly, the collected disaster site survey 2D data is constructed as a spatial DB using GeoServer's WMS service and PostGIS provided an open source and rendered in a web environment. Secondly, in order to efficiently render large-capacity 3D point cloud data in a web environment, a Potree algorithm is applied to simplifies point cloud data into 2D tiles using a multi-resolution octree structure. Lastly, OpenLayers3 based 3D web mapping pilot system is developed for web visualization of 2D/3D spatial information by implementing basic and application functions for controlling and measuring 3D maps with Graphic User Interface (GUI). For the further research, it is expected that various 2D survey data and various spatial image information of a disaster site can be used for scientific investigation and analysis of disaster accidents by overlaying and visualizing them on a built web-based 3D geo-spatial information system.