• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.198-203
• /
• 1999

2D carbon/carbon composites have been prepared with and without addition of 1, 3 and 5wt% of oxidation inhibitor boron and then heat teated up to 1700, 2000, 2300, 2600 each. This paper presents the effects of boron on the mechanical properties of 2D C/C composites in terms of the acceleration of graphitization and also discussed about the retardation of air oxidation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.207-208
• /
• 2007

Recently, high performance microelectronic devices are designed in multi-layer structure in order to make dense wiring of metal conductors in compact size. Imprint lithography have received significant attention due to an alternative technology for photolithography on such devices. In this work, we synthesized dielectric composite materials based on epoxy resin, and investigated their thermal stabilities and dynamic mechanical properties for thermal imprint lithography. In order to enhance the mechanical properties and toughness of dielectric material, various modified polyetherimide(PEI) was applied in the resin system. Curing behaviours, thermal stabilities, and dynamic mechanical properties of the dielectric materials cured with various conditions were studied using dynamic differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA), and Universal Test Method (INSTRON).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.444-447
• /
• 2008

A sandwich plate with a truss core is composed of two face sheets and a truss core between the face sheets. In this paper, a metallic sandwich plate with a pyramidal truss core is investigated numerically, for its deformation and energy absorption ability under dynamic loading. To find the effect of mechanical properties on crashworthiness in the sandwich plate with a pyramidal truss core, various pyramidal cores were simulated and investigated. It appears that relative density and shear modulus of a pyramidal truss core effect the change of energy absorption.

• Journal of the Korean Wood Science and Technology
• /
• 제39권4호
• /
• pp.311-317
• /
• 2011

라디에타 소나무(Pinus radiata D.Don)를 압체온도 $180^{\circ}C$, 압체시간 60분 조건으로 열압밀화 목재를 제작하여 압축세트량에 따른 종압축강도, 휨강도, 경도, 못뽑기저항을 조사하였다. 압축세트량 60%인 열압밀화 목재의 비중은 1.01로 나타났으며, 대조군의 비중 0.48에 비해 현저히 증가한 값을 나타내었다. 압축세트량의 증가와 함께 모든 역학적 특성도 향상되었다. 그리고 라디에타 소나무의 최대 압축세트량은 약 65%로 확인되었으며, 이는 비중 0.48인 라디에타 소나무의 공극율 68%와 거의 일치하는 결과이다.

• 한국주조공학회지
• /
• 제33권4호
• /
• pp.147-156
• /
• 2013

The effects of core materials on the microstructure and mechanical properties of Al casting products have been investigated. The Al casting samples and cylinder head were fabricated by using organic and inorganic binder core respectively, and their microstructure and mechanical properties were evaluated. The Al casting samples fabricated by using inorganic core showed the better mechanical properties such as tensile strength and elongation than those of the Al casting samples fabricated by using organic core. That's because the Al casting samples contained small amount of pore defects and had fine microstructure compared with the Al casting samples fabricated by using organic core. Also, the use of inorganic core effectively reduced harmful gas emission and pollution.

• 한국염색가공학회지
• /
• 제33권3호
• /
• pp.131-140
• /
• 2021

Collagen and chitosan are used in medical and cosmetic materials as natural polymers. In order to utilize the advantages of the materials, collagen/chitosan conjugated wet-spun fibers were prepared. The analysis of surface, optical, thermal and mechanical properties was carried out on the various composition of collagen and chitosan. As a result of images analysis, it was verified that the collagen/chitosan conjugated fibers were stably spun. In addition, the optical and thermal properties of fibers were observed to be changed by hydrogen bond. As a result, an optimized composition could be found at an appropriate content. Moreover, the optimized fibers have mechanical properties similar to chitosan fibers, while improving the structural and thermal stability by its hydrogen bond. In addition, the wet-spun collagen/chitosan conjugated fibers can be applied to medical and various fields through mechanical properties according to content control.

• 한국전산구조공학회논문집
• /
• 제37권1호
• /
• pp.33-40
• /
• 2024

해양폐기물 중 하나인 패각의 발생량은 매년 증가하고 있으나, 대부분이 해안 근처에 야적되거나 방치되어 환경적·사회적으로 문제가 되고 있다. 천연 골재 부존량 감소에 따른 골재 대체재로서 패각이 사용된다면 재료 수송에 따른 물류비용을 효과적으로 감축시킬 수 있어 자원 재활용을 활성화할 수 있다. 본 연구에서는 3D 콘크리트 프린팅 기술을 활용한 해양 구조물의 건설 재료로서 패각 잔골재의 사용 가능성을 분석하였다. 패각을 활용한 3D 프린팅 콘크리트는 패각 잔골재와 시멘트 풀 계면 등의 공극 요인으로 일반 콘크리트 대비 낮은 강도를 가지기 때문에 역학적 성능 평가를 위한 미세구조 특성 분석이 요구된다. 유동성, 출력성 및 적층성을 고려하여 3D 프린팅 콘크리트의 배합을 선정하였으며, 패각 잔골재를 활용한 3D 프린팅 콘크리트 시편의 물성과 미세구조를 분석하였다. 시편의 물성을 평가하기 위해 3D 프린터로 압축강도와 부착강도 시편을 제작하였고 강도 시험을 진행하였다. 미세구조를 분석하기 위해 고해상도 이미지를 얻을 수 있는 SEM 촬영을 수행하였으며, 히스토그램 기반 상 분리 방법을 적용하여 공극을 분리하였다. 패각 잔골재 종류에 따른 공극률을 확인하고 확률함수를 활용하여 공극 분포 특성을 정량화하였으며, 패각 잔골재의 종류에 따른 시편의 역학적 물성과 미세구조 특성 간의 상관관계를 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.242-242
• /
• 2006

Increasingly complex tasks are performed by computers or cellular phone, requiring more and more memory capacity as well as faster and faster processing speeds. This leads to a constant need to develop more highly integrated circuit systems. Therefore, there have been numerous studies by many engineers investigating circuit patterning. In particular, PCB including module/package substrates such as FCB (Flip Chip Board) has been developed toward being low profile, low power and multi-functionalized due to the demands on miniaturization, increasing functional density of the boards and higher performances of the electric devices. Imprint lithography have received significant attention due to an alternative technology for photolithography on such devices. The imprint technique. is one of promising candidates, especially due to the fact that the expected resolution limits are far beyond the requirements of the PCB industry in the near future. For applying imprint lithography to FCB, it is very important to control thermal properties and mechanical properties of dielectric materials. These properties are very dependent on epoxy resin, curing agent, accelerator, filler and curing degree(%) of dielectric materials. In this work, the epoxy composites filled with silica fillers and cured with various accelerators having various curing degree(%) were prepared. The characterization of the thermal and mechanical properties wasperformed by thermal mechanical analysis (TMA), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), rheometer, an universal test machine (UTM).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.336-341
• /
• 1998

Steel fiber reinforced concrete(SFRC) is a composite material possessing many physical and mechanical properties which are distinct from unreinforced concrete. The use of steel fiber reinforcement to improve the flexural and tensile strengths, extensibility and toughness of ordinary cement concrete is well known at present, but reinforcement of polymer concrete with steel fibers has been hardly reported untill now. The objective of this study was to improve the properties of the polymer concrete by addition of steel fibers. In this paper steel fiber reinforced polymer concrete is prepared with various steel fiber contents and aspect ratio($\ell$ /d), and their mechanical properties were investigated experimentally.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.245-249
• /
• 2006

The effect of scouring, bleaching and dyeing on the low stress mechanical and surface properties of wool woven fabrics was studied. Fabric properties were measured by the KES-FB system. In general, mechanical properties of the treated fabrics are greatly affected by scouring, moderately by dyeing and least by bleaching.