• 재활복지공학회논문지
• /
• 제5권1호
• /
• pp.41-46
• /
• 2011

감각신경성 난청의 원인 중 하나는 내이에 존재하는 와우(cochlea)의 기능적 이상 때문이다. 와우에서 내유모세포(inner hair cell, IHC)나 신경의 기능적 이상이 있는 곳을 'dead region'이라고 한다. 보청기에서 dead region에 속하는 주파수 영역의 증폭은 효과가 미약한 것으로 알려져 있다. 본 논문에서는 dead region의 위치에 따른 음성신호의 인지 능력 비교와 dead region이 존재할 때 보청기의 효과적인 이득값을 알아보기 위해 WRS 검사와 선호도 조사를 실시하였다. WRS(Word Recognition Score)검사와 선호도 조사를 위해 정상 청력 능력을 지닌 성인 남녀 8명을 대상으로, white noise와 babble noise를 이용하여 신호 대 잡음비(SNR) 0dB의 조건으로 검사음과 혼합하였으며, dead region의 영역을 세 가지로 분류하였다. 주파수 영역에 따라 low-frequency, mid-frequency, high-frequency dead region으로 나누고, 각 dead region에 따라 14.5 dB, 11.5 dB, 6 dB의 증폭 이득을 다르게 하여 결과를 비교하였다. dead region의 위치에 따른 검사 결과는 각 영역별로 차이가 있었다. WRS 검사결과 low-frequency dead region일 때 보다, mid-frequency dead region나 high-frequency dead region일 때의 WRS점수와 선호도 평가가 높게 나왔으며, 증폭 이득값의 차이를 비교해 보았을 때, 14.5 dB의 이득에 비해 낮은 이득을 주었을 때 WRS 검사 결과값이 더 높게 나왔으며, 높은 이득일수록 선호도 조사에서 낮은 점수를 받았다.

• 한국재료학회지
• /
• 제28권7호
• /
• pp.391-397
• /
• 2018

This study deals with the microstructure and tensile properties of 700 MPa-grade high-strength and seismic reinforced steel bars. The high-strength reinforced steel bars (600 D13, 600 D16 and 700 D13 specimens) are fabricated by a TempCore process, while the seismic reinforced steel bar (600S D16 specimen) is fabricated by air cooling after hot rolling. For specimens fabricated by the TempCore process, the 600 D13 and 600 D16 specimens have a microstructure of tempered martensite in the surface region and ferrite-pearlite in the center region, while the 700 D13 specimen has a microstructure of tempered martensite in the surface region and bainite in the center region. Therefore, their hardness is the highest in the surface region and shows a tendency to decrease from the surface region to the center region because tempered martensite has a higher hardness than ferrite-pearlite or bainite. However, the hardness of the 600S D16 specimen, which is composed of fully ferrite-pearlite, increases from the surface region to the center region because the pearlite volume fraction increases from the surface region to the center region. On the other hand, the tensile test results indicate that only the 700 D13 specimen with a higher carbon content exhibits continuous yielding behavior due to the formation of bainite in the center region. The 600S D16 specimen has the highest tensile-to-yield ratio because the presence of ferrite-pearlite and precipitates caused by vanadium addition largely enhances work hardening.

• 한국통신학회논문지
• /
• 제22권8호
• /
• pp.1691-1697
• /
• 1997

This paper presents a new motion compensated error coding method suitable for region based image coding system. Compared with block based conding, the region based coding improves subjective quality as it estimates and compensates 2D (or 3D) translantional, rotational, and scaling motion for each regions. although the region based coding has this advantage, its merit is reduced as bock-DCT (2D-DCT) is used to encode motion-compensated error. To overcome this problem, a new region adaptive motion compensated error coding technique which improver subjective and objective quality in the region boundary is proposed in this paper. In the proposed method, regions with large error are estimated using contour of the regions and contrast between the regions. The regions estiated as those with large error are coded by arbitrarily shaped image segment coding method. The mask information of the coded regions is not transmitted because it is estimated as the same algorithm in the encoder and the decoder. The proposed region adaptive motion conpensated error coding method improves about 0.5dB when it is compared with conventional block based method.

• Parasites, Hosts and Diseases
• /
• 제26권2호
• /
• pp.113-116
• /
• 1988

간흡충 세르카리아의 감각유두 분포양상 즉 chaetotaxy를 관찰하였다. 이 세르카리아의 chaetotaxy는 두부(cephalic region)에서 제1열에 5∼6 Ci 1, 4∼5 Ci 2, 5∼6 Ci 3, 제2열에 4 Cii 1, 2 Cii 2, 4 Cii 3, 5∼6 Cii 4, 제3열에 3∼4 Ciii 1, 2∼3 Ciii 2, 및 제 4열에 2 Civ 1, 2∼3 Civ 2, 2∼3 Civ 3의 분포를 보였으며, 몸통 부위 (body region)의 각측(V) 및 때측(D)에서 2 AiV, 1 AiD, 2 AiiV, 1 AiiB,2 kiiiv,2 AiiiD, 1 AivV, 1 AivD, 1 PiiD, 1 PiiiD, 그리고 꼬리 부위(caudal region)에서 2-2-2-2의 분포양상을 보였다. 이 결과를Opisthorchis chabaudi 및 Metagonimus yokugawai에서 보고된 chaetotaxy와 비교하였다.

• Advances in Computational Design
• /
• 제1권3호
• /
• pp.253-264
• /
• 2016

Based on the variation of strain along the cross section, any region in a structural member can be classified into two regions namely, Bernoulli's region (B-region) and Disturbed region (D-region). Since the variation of strain along the cross section for a B-region is linear, well-developed theories are available for their analysis and design. On the other hand, the design of D-region is carried out based on thumb rules and past experience due to the presence of nonlinear strain distribution. Strut-and-Tie method is a novel approach that can be used for the analysis and design of both B-region as well as D-region with equal importance. The strut efficiency factor (${\beta}_s$) is needed for the design and analysis of concrete members using Strut and Tie method. In this paper, equations for finding ${\beta}_s$ for bottle shaped struts in concrete deep beams (a D-region) with and without steel fibres are developed. The effects of transverse reinforcement on ${\beta}_s$ are also considered. Numerical studies using commercially available finite element software along with limited amount of experimental studies were used to find ${\beta}_s$.

• 생명과학회지
• /
• 제26권11호
• /
• pp.1341-1344
• /
• 2016

보길도에서 자라고 있는 황칠나무(Dendropanax morbifera)를 구입하여, 캘러스로 유도한 후, ribosomal DNA(nrDNA)의 internal transcribed spacer (ITS) region의 염기서열을 결정하였다 보길도의 황칠나무(Dendropanax morbifera)의 ITS region의 염기서열을 분석한 결과, 총 689염기를 결정하였다. 결정된 689염기 중에서 ITS1은 222 개염기, 5.8S rDNA는 160염기, ITS2는 233염기인 것으로 판명되었다. GenBank의 BLAST 프로그램(http://www.ncbi.nlm.nih.BLAST)을 사용하여 GenBank/EMBL/DDBJ에 등록되어 있는 Dendropanax 속 33의 염기서열을 수집한 후 multiple alignment를 수행한 결과, 유사도는 99.7%(D. chevalieri)에서 92.6%(Dendropanax arboreus)로 나타났으며, 일본황칠나무(D. trifidus)와는 유사도가 99.4%로 판명되었다.

• 제어로봇시스템학회논문지
• /
• 제13권9호
• /
• pp.868-874
• /
• 2007

This paper proposes an efficient partial matching system and representation by using a region-based method for 2D image, and we applied to an extraction of the ROI(Region of Interest) according to its matching score. The matching templates consist of the global pattern and the local one. The global pattern can make it by using region-based relation between center region and its rest regions in an object. And, the local pattern can be obtained appling to the same method as global, except relation between objects. As the templates can be normalized, we use this templates for extraction of ROI with invariant to size and position. And, our system operates only one try to match, due to normalizing of region size. To use our system for searching and examining if it's the ROI by evaluating the matching function, at first, we are searching to find candidate regions with the global template. Then, we try to find the ROI among the candidates, and it works this time by using the local template. We experimented to the binary and the color image respectively, they showed that the proposed system can be used efficiently for representing of the template and the useful applications, such as partially retrievals of 2D image.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.1887-1890
• /
• 2003

This paper presents a three-dimensional (3D) head pose estimation algorithm using the stereo image. Given a pair of stereo image, we automatically extract several important facial feature points using the disparity map, the gabor filter and the canny edge detector. To detect the facial feature region , we propose a region dividing method using the disparity map. On the indoor head & shoulder stereo image, a face region has a larger disparity than a background. So we separate a face region from a background by a divergence of disparity. To estimate 3D head pose, we propose a 2D-3D Error Compensated-SVD (EC-SVD) algorithm. We estimate the 3D coordinates of the facial features using the correspondence of a stereo image. We can estimate the head pose of an input image using Error Compensated-SVD (EC-SVD) method. Experimental results show that the proposed method is capable of estimating pose accurately.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.107-115
• /
• 2008

Accurate extraction of traversable region is a critical issue for autonomous navigation of unmanned ground vehicle(UGV). This paper introduces enhanced extraction of traversable region by combining scene clustering with 3D world modeling using CCD(Charge-Coupled Device)/IR(Infra Red) image. Scene clustering is developed with K-means algorithm based on CCD and IR image. 3D world modeling is developed by fusing CCD and IR stereo image. Enhanced extraction of traversable regions is obtained by combining feature of extraction with a clustering method and a geometric characteristic of terrain derived by 3D world modeling.

• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2514-2519
• /
• 2012

광역경제권 선도산업은 지역 간 협력 및 연계를 통해 산업 경쟁력을 높이는 것을 정책 목표로 하고 있어 R&D의 경제적 파급효과에 대한 권역별 분석이 요구된다. 본 논문에서는 충청광역경제권 선도산업 중 'New IT' 분야의 '차세대무선통신 단말기 부품소재 글로벌 경쟁력 강화' 프로젝트에 대한 경제적 파급효과를 한국은행에서 발간한 지역산업연관표를 활용하여 분석한다.