• Korean Journal of Radiology
• /
• v.24 no.7
• /
• pp.681-689
• /
• 2023

Objective: Three-dimensional rotational angiography (3D-RA) is increasingly used for the evaluation of intracranial aneurysms (IAs); however, radiation exposure to the lens is a concern. We investigated the effect of head off-centering by adjusting table height on the lens dose during 3D-RA and its feasibility in patient examination. Materials and Methods: The effect of head off-centering during 3D-RA on the lens radiation dose at various table heights was investigated using a RANDO head phantom (Alderson Research Labs). We prospectively enrolled 20 patients (58.0 ± 9.4 years) with IAs who were scheduled to undergo bilateral 3D-RA. In all patients' 3D-RA, the lens dose-reduction protocol involving elevation of the examination table was applied to one internal carotid artery, and the conventional protocol was applied to the other. The lens dose was measured using photoluminescent glass dosimeters (GD-352M, AGC Techno Glass Co., LTD), and radiation dose metrics were compared between the two protocols. Image quality was quantitatively analyzed using source images for image noise, signal-to-noise ratio, and contrast-to-noise ratio. Additionally, three reviewers qualitatively assessed the image quality using a five-point Likert scale. Results: The phantom study showed that the lens dose was reduced by an average of 38% per 1 cm increase in table height. In the patient study, the dose-reduction protocol (elevating the table height by an average of 2.3 cm) led to an 83% reduction in the median dose from 4.65 mGy to 0.79 mGy (P < 0.001). There were no significant differences between dose-reduction and conventional protocols in the kerma area product (7.34 vs. 7.40 Gy·cm², P = 0.892), air kerma (75.7 vs. 75.1 mGy, P = 0.872), and image quality. Conclusion: The lens radiation dose was significantly affected by table height adjustment during 3D-RA. Intentional head off-centering by elevation of the table is a simple and effective way to reduce the lens dose in clinical practice.

• Korean Journal of Biological Psychiatry
• /
• v.1 no.1
• /
• pp.67-78
• /
• 1994

The author examined the relationship of two markers, D5S39(p105-153Ra), D5S76(p105-599Ha) of chromosome 5 and $D_2$, $D_3$ receptor genes in a Korean schizophrenic pedigree using polymerase chain reaction(PCR). The results were as follows : 1) On D5S39 locus, 5 different alleles(224/226 bp : 4 cases, 218/226 bp : 3 cases, 222/226 bp : 3 cases, 218/230 bp : 1 case, 222/224 bp : 1 case) were produced. 2) On D5S76 locus, 5 different alleles(102/112 bp : 4 cases, 94/112 bp : 3 cases, 108/112 bp 3 cases, 94/94 bp : 1 case, 102/108 bp 1 case) were produced. 3) On $D_2$ receptor gene, 3 different alleles($A_1A_2$ : 8 cases, $A_1A_1$ : 2 cases, $A_2A_2$ : cases) were produced. 4) On $D_3$ receptor gene, 2 different alleles(1/2 : 7 cases, 1/1 : 5 cases) were produced. The author had not find any specific alleles on all four loci in all pedigree nor any specific alleles in the schizophrenic patients. Though the author has not found absolute relationship between the four loci and the onset of schizophrenia, there still remains the possibilities if the more detailed and elaborated pedigree studies are done.

• Journal of Life Science
• /
• v.23 no.10
• /
• pp.1216-1222
• /
• 2013

NK cells are lymphoid immune cells that participate in innate immunity to protect against foreign pathogens and transforming cells. It is known that the activity of NK cells is regulated by a balance between activating and inhibitory signals rather than specific antigens. One important activating signal is mediated by the NKG2D receptor, which recognizes NKG2D ligands on cancer cells. Therefore, tumor cells that express sufficient amounts of NKG2D ligands could be eliminated by NKD2D+ cells, including NK cells. Oncogenes drive tumor cells to apoptosis resistant and uncontrolled proliferation by altered expression of many critical genes. Therefore, the expression of NKG2D ligands may be affected by oncogenes. This study focused on increasing the susceptibility of cancer cells to NK cells by regulating the expression of NKG2D ligands influenced by three oncogenes: k-ras, wnt, and c-myc. We demonstrated that inhibition of k-ras and c-myc increased the expression of NKG2D ligands and enhanced the susceptibility of cancer cells to NK cells. On the contrary, inhibition of the wnt pathway decreased MICA and ULBP1 transcripts. Although the decreased transcription of NKG2D ligands by inhibition of the wnt pathway, surface proteins of NKG2D ligands were not changed, and the susceptibility of HCT-116 cells was unaffected. The results demonstrate that the transcription of NKG2D ligands are regulated deferentially by the k-ras, c-myc, and wnt pathways and that the cytotoxicity of NK cells solely depends on the amount of surface NKG2D ligands.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1540-1560
• /
• 2022

Latest technological innovation in the development of compact lower power radios has led to the explosion of Internet of Things. With Wi-Fi, Zigbee and other physical layer protocols offering short coverage area there was a need for a RF protocol that had a larger coverage area with low power consumption. LoRa offers Long Range with lower power consumption. LoRa offers point to point and point to multipoint connections. with Single hop communication in place the need for routing protocols are eliminated. LoRa Wide Area Network stack can accommodate thousands of nodes under a single LoRa gateway with a single hop communication between the end nodes and LoRaWAN gateway. This paper takes an experimental approach to analyze the basic physical layer parameters of LoRa and the practical coverage offered by a LoRaWAN under highly dense urban conditions with variable topography. The insights gained from the practical deployment of the LoRaWAN network, and the subsequent performance analysis is used to design a novel public utility monitoring platform. The second half of the papers is designing a robust platform to integrate both existing wired sensor water meters, current and future generation wireless water meters. The Common Automated Metering Platform is designed to integrate both wired sensors and wireless (LoRaWAN and Wi-Fi) supported water meters. This integrated platform reduces the number of nodes under each LoRaWAN gateway and thus improves the scalability of the network. This architecture is currently designed to accommodate one utility application but can be modified to integrate multi-utility applications.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.867-870
• /
• 2001

All-trans-retinoic acid (RA) plays essential roles in the regulation of differentiation and proliferation. It has been proved that RA is effective in the treatments of epithelial and hematologic malignancies. However, in spite of its pronounced effects, the clinical applications of RA are limited due to the retinoid acute resistance. Although RA induces complete remission in a high proportion of the patients of acute promyelocytic leukemia (APL), the cancer was relapsed in many patients after a brief remission in spite of a continued RA treatment. Patients who relapsed from remission that was initially induced by RA had clinically resistant to further RA treatment. That is, specific cytochrome P450 enzymes in the liver were induced by the continuous oral administration of RA, thereby accelerating the metabolism of RA. To overcome this problem, biodegradable microspheres were proposed by us, previously. And, several microsphere formulations for RA delivery have been prepared and studied on their effectiveness. Recently, poly(D,L-lactide) (PDLLA) microsphere formulation was optimized, And, from the animal studies by using a mouse and a rat, it have appeared to be effective on both the inhibition of tumor growth and chemoprevention of a carcinogenesis. In this study, subacute toxicities of the PDLLA microsphere formulation have been investigated as a preclinical test. For the test, the microspheres was injected subcutaneously into the back site of rats, and body weight change, clinical signs, hematological changes, blood biochemistry were evaluated. As a result, severe toxicities such as mortality were observed at the dose of 100mg RA/kg, and toxicities were not observed at the dose of 50mg RA/kg, which is the effective dose against carcinogenesis. Bone fracture, observed at several rats, might be inhibited by treating them with anti-inflammatory drugs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.280-284
• /
• 2011

본 연구에서는 한강의 제1지류인 홍제천 수계에 포함된 불광천 유역을 대상으로 도시지역 침수모의를 수행하였다. 1차원 모형인 HEC-GeoRAS를 이용하여 외수침수에 대한 모의를 수행하였고, 2차원 모형인 CCHE2D를 이용하여 외수침수와 내 외수침수에 대해 모의를 수행하여 비교하였다. SWMM을 이용하여 확률 홍수량과 유출량을 산정한 후, HEC-GeoRAS를 이용하여 50년, 100년, 200년 빈도의 홍수량에 대한 침수지역 및 침수심을 구하였다. 외수침수와 내 외수침수를 각각 수행하여 빈도별 홍수량에 따른 침수지역 및 침수심을 구하였다. 두 모형을 이용한 1차원 및 2차원 해석결과를 바탕으로 기법별 침수면적 및 침수심을 비교한 결과 HEC-GeoRAS가 CCHE2D보다 과다 산정되는 것을 확인할 수 있었다. CCHE2D 모형을 이용한 외수침수모의와 내 외수침수모의를 비교했을 때 침수면적은 높은 빈도에서 최소 1.03배로 큰 차이가 없었으나 낮은 빈도에서 6.85배로 큰 차이가 발생하며, 침수심은 최소 1.01배, 최대 1.28배로 큰 차이가 없었다. 이는 내수침수가 침수면적 산정에 큰 영향을 미치며, 침수지역을 결정하는데 높은 빈도에서는 제방을 월류한 유량이 크게 영향을 미치고, 낮은 빈도에서는 맨홀을 월류한 유량이 크게 영향을 미치는 것으로 판단된다.

• Journal of Technologic Dentistry
• /
• v.43 no.2
• /
• pp.56-61
• /
• 2021

Purpose: This study aimed to produce resin prosthetics using a dental automatic barrel finishing. Surface roughness and surface topography of resins were observed according to the grinding time of the dental automatic barrel finishing. Methods: This study was performed with thermopolymer, autopolymer, and photopolymer resins. The dimensions of the specimen were 10×10×2 mm. Each specimen was polymerized according to the manufacturer's instructions. The polymerized resin was honed for 30 minutes at 5-min intervals in a dental automatic barrel finishing. The specimen was observed using a three-dimensional (3D) optical microscope, and the surface roughness was measured. Results: After the polishing with the dental automatic barrel finishing, the heat-cured (HC) specimen showed the highest and lowest values of Ra after 10 and 15 minutes, respectively. The self-cured (SC) specimen showed the highest and lowest values of Ra after 10 and 25 minutes, respectively. Finally, the 3D specimen showed the highest and lowest values of Ra after 5 and 20 minutes, respectively. Conclusion: After measuring the surface roughness of the three types of resins according to the grinding time of the dental automatic barrel finishing, the lowest Ra values for the HC, SC, and 3D specimens were measured after 15, 25, and 20 minutes, respectively. Therefore, we concluded that a limit on the grinding time of the resin using a dental automatic barrel finishing is needed.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.437-443
• /
• 2009

In this study, we used the random amplified polymorphic DNA (RAPD) technique to evaluate the genetic relationships among 29 grapevine cultivars (Vitis spp.). Sixty selective primers detected a total of 558 polymorphic bands. By UPGMA (unweighted pair-group method arithmetic average) cluster analysis with 558 polymorphic bands, the 29 grapevine cultivars were divided into six major groups at 58.8% genetic similarity. The "Super Hamburg" was clustered in group I. Group II consisted of "Wonkyo RA-23", "Muscat Hamburg", "Tano Red", and "Tankeumchu". Group III consisted of "Alden", "Wonkyo RA -21", "Wonkyo RA-30", and "Dutchess". Group IV included 14 grapevine cultivars ("Heukgoosul", "Heukbosuk", "Suok", "Wonkyo RA-29", "Wonkyo RA-22", "Kyoho", "Pione", "Beniizu", "Golden Muscat", "Jinok", "Doonuri", "Campbell Early", "Delaware", and "Schuyler"). Group V consisted of "Hongdan", "Tamnara", "Hongisul", and "Himrod seedless". Group VI included 2 cultivars ("Cheongsoo", and "S. 9110").

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.825-830
• /
• 2016

The purpose of this study optimizes the conditions of PLA printing material for 3D printer. Deltabot type 3D printer is used. The ranges of printing temperature, printing speed, and infill density are $195{\sim}215^{\circ}C$, 10~70mm/sec, and 10~100% respectively. From the results of printing temperature, printing quality is almost same every printing temperature. From the results of printing speed and infill density, printing quality is excellent under 40mm/sec, and over 50% respectively. Surface roughness is $2.28{\mu}mRa$ at $205^{\circ}C$, 10mm/sec, 100%, and is $5.93{\mu}mRa$ at $205^{\circ}C$, 70mm/sec. Surface roughness is directly proportional to the printing speed, and is inversely proportional to the infill density. Objects fabricated PLA printing material adhere bed at room temperature.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.2
• /
• pp.230-238
• /
• 2022

Internet of Things(IoT) is a communication technology that collects information of object remotely and controls the function of object by adding a communication function to object that does not have a communication function. For the IoT, various communication technologies such as Wi-Fi, 3GPP, and Bluetooth are available, and Long Range(LoRa) is communication technologies specialized in the IoT concept. LoRa is a communication technology that support long-distance, low-power, and low-speed communication, and is suitable for collecting information generated form object in remote equipment and controlling equipment. Because of these characteristics, it is used in many application field, and various performance improvement studies are in progress. This paper intends to propose an ultra-long-range LoRa communication module that can be used in a wider range of applications. We design and implement hardware, firmware, and application software for testing to develop ultra-long-range LoRa communication modules. The implemented module will be tested in a real environment to verify its performance and to check its utilization.