• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.30-40
• /
• 1995

Optically accessible D. I. diesel engine with a rectangular combustion chamber was constructed to visualize the behaviors of sprays and flames in the combustion camber with the close conditions of pressure and temperature in an actual engine. The behaviors of sprays and flames in the combustion chamber as the operating conditions of this engine were photographed with high speed camera by Diffused Background Illumination Method. With photographs taken by this method, behavior of spray droplets injected into the combustion chamber, ignition points, and flame propagation were observed and analyzed at a time-and space-dependent fashion.

• Journal of Pharmaceutical Investigation
• /
• 제26권1호
• /
• pp.13-22
• /
• 1996

Poly(D,L-lactic acid) (PLA) microspheres containing alprazolam(APZ) were prepared by a solvent-emulsion evaporation method and their release patterns were investigated in vitro. Various batches of microspheres with different size and drug content were obtained by changing the ratio of APZ to PLA, PLA concentration in the dispersed phase and stirring rate. Rod-like APZ crystals on microsphere surface, which were released rapidly and could act as a loading dose, were observed with increasing drug content. The release rate was increased with increase in drug contents and decrease in the molecular weight of PLA. The release rate of APZ for long-acting injectable delivery system in vitro, which would aid in predicting in vitro release profile, could be controlled by properly optimizing various factors affecting characteristics of microspheres.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.347-349
• /
• 2005

본 논문에서는 가정용으로 사용하는 3kW 무변압기형 태양광 발전용 인버터에 대하여 설명한다. 지금까지 국내에서 생산되고 있는 태양광 발전용 인버터는 외산을 제외하고는 상용 주파수의 변압기를 장착한 형태로서 계통에 안정적이고 제어가 간단하지만 부피가 크고 무게가 무겁고, 또한 태양전지의 입력 전압 범위가 좁다는 단점을 가지고 있다. 이를 개선하기 위해서 승압형 DC-DC 컨버터를 추가하여, 변압기 없이 컨버터와 인버터로 구성된 시스템을 소개하고 구성 및 특성에 대해서 알아본다.

• 한국표면공학회지
• /
• 제50권6호
• /
• pp.432-438
• /
• 2017

AZ91D casting alloy requires an advanced plasma anodizing processing because large amount of defects are liable to generate during anodization. In this study, plasma electrolytic oxidation (PEO) of AZ91D Mg alloy was conducted by the application of either constant voltage or current using a pulse mode and its effects on pore formation, surface roughness and corrosion resistance were investigated. The PEO films showed a three-layer structure. The PEO film thickness was found to increase linearly with voltage. The surface roughness, Ra, ranged between $0.2{\mu}m$ and $0.3{\mu}m$. The corrosion resistance increased from RN 3.5 to 9.5 by the PEO treatment when evaluated according to the 72 hour salt spray test. The PEO-treated surface exhibited higher pitting potential than the raw material.

• 생태와환경
• /
• 제45권4호
• /
• pp.392-402
• /
• 2012

본 연구는 어류군집을 이용하여 회야강 수계와 인근 하천의 건강도를 분석하고 해당하천을 효과적으로 관리하기 위하여 29지점에 대한 어류상을 조사하였다. 2007년 실시된 조사에서 총 12과 33종의 어류가 채집되었으며, 전체 조사지점에서 우점종은 피라미 (Zacco platypus, RA: 24.8%), 아우점종은 버들치(Rhynchocypris oxycephalus, RA: 16.2%)로 나타났다. 또한 8종의 한국고유종과 4종의 외래종, 그리고 타 수계로부터 도입된 2종의 이입종(끄리, Opsariichthys uncirostris amurensis; 치리, Hemiculter eigenmanni)의 서식이 확인되었다. 하천별 건강성 평가를 위해 어류군집을 이용하여 생물보전지수 (IBI)를 구한 결과 2지점이 B 등급인 것을 제외한 대부분 C~D등급으로 확인되었다. 조사지점 인근의 토지이용이 하천의 건강성에 미치는 영향을 알아보기 위해 생물보전지수와 토지이용과의 Pearson correlation 분석을 실시한 결과 개발지가 증가할수록 생물보전지수가 감소하였다(r=-0.425, p=0.022). 반대로 생물보전지수와 숲과 초지는 양의 상관성을 보였으며(r=0.556, p=0.002), 경작지는 유의한 상관관계를 나타내지 않았다 (r=-0.231, p=0.333). 본 연구를 통해 확인된 회야강 수계 및 인근하천의 어류군집구조, 하천의 건강도, 인근 토지이용과의 상관관계는 유역 토지의 개발로 인한 인근 하천의 영향 예측 및 해당하천의 관리 및 복원사업에 있어 유용하게 이용될 수 있을 것이다.

• Restorative Dentistry and Endodontics
• /
• 제32권6호
• /
• pp.542-549
• /
• 2007

본 연구의 목적은 네 종류의 복합레진의 연마 후의 표면 거칠기에 있어서의 차이와 염색액에 담근 후 색 안정성에 있어서의 차이를 평가하기 위한 것이다. 필러 크기와 함량이 다른(나노입자형, 혼합형, 미세입자형, 흐름성) 네 종류의 광중합 복합레진(색상 A2)을 사용하였다. 산화 알루미늄 마모 디스크(Super-Snap)로 연마하기 전과 후에 평균 표면 거칠기(Ra)를 표면 조도 측정기 (Surftest Formtracer)로 측정하였다. 2% 메틸렌 블루 용액으로 착색하기 전과 후 표본의 색은 SCI geometry를 이용해 spectrophotometer(CM-3700d)로 측정되었다. 표면 거칠기와 색 변화 값은 one-way ANOVA, Scheffe multiple comparison test와 Student t-test로 분석되었다. 연마 후, 표면 거칠기 값은 복합레진의 종류에 관계없이 감소하였다. 연마 후 표면 거칠기와 착색 후 색 안정성에 있어서, 나노입자형 복합레진이 흐름성 레진을 제외한 다른 복합레진들과 유사하였다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.293-296
• /
• 2005

This paper presents the design of linear and circular polarization baseball- shaped circular microstrip antenna (BCMA) with 3-dimensional structure using perturbation effect to reduce its size, which runs at 1.575GHz frequency bandwidth. As a result, the size of linear polarized antenna could be reduced up to 23.7% in patch diameter and 41.8% in its area. Linear polarized antenna has -26.04dB of return loss, 69MHz(4.38%) of -l0dB bandwidth, 4.51dBd of gain, and its -3dB beamwidth are 99$^{\circ}$ in E-plane, 83$^{\circ}$ in H-plane. Circular polarized antenna has -17.43dB of return loss, 113.7MHz(7.2%) of -l0dB bandwidth, 2dBd of gain, 2dB of axial ratio and its -3dB beamwidth are 87$^{\circ}$, 86$^{\circ}$ x-axis polarized, 80$^{\circ}$, 84$^{\circ}$ y-axis polarized. It has 82mm of diameter, which is 28.5% of linear polarized CMPA. Therefore, in this paper we verified that baseball-shaped 3-dimensional structure of circular microstrip patch antenna applied with perturbation effect is appropriate for miniaturization.

• 소성∙가공
• /
• 제22권1호
• /
• pp.23-29
• /
• 2013

In this study, a micro/nano-random-pattern-structure surface was machined by electric discharge machining (EDM) followed by replicating the EDM surface with a silicone elastomer having low energy and greater hydrophobicity. The variation of hydrophobicity was of prime interest and was examined as a function of the surface roughness of the replicated silicone elastomer. The hydrophobicity was evaluated by the water contact angle (WCA) measured on the relevant surface. For the experiments, the original surfaces were machined by die sinking electric discharge machining (DS-EDM) and wire cutting electric discharge machining (WC-EDM). The ranges of surface roughness were Ra $0.8{\sim}19{\mu}m$ for the DS-EDM and Ra $0.5{\sim}4.7{\mu}m$ for the WC-EDM. In order to fabricate a hydrophobic surface, the EDM surfaces were directly replicated using a liquid-state silicone elastomer, which was thermally cured. The measured WCA on the replicated surfaces for DS-EDM was in the range of $115{\sim}130^{\circ}$ and for WC-EDM the WCA was in the range of $123{\sim}150^{\circ}$. Additionally, the dynamic hydrophobicity was evaluated by measuring an advancing and a receding WCA on the replicated silicone elastomer surfaces.

• 천문학회보
• /
• 제37권2호
• /
• pp.211.1-211.1
• /
• 2012

The on-orbit test simulation for predicting the instrument directional responsivity was conducted by the Monte Carlo based integrated ray tracing (IRT) computation technique and analytic flux-to-signal conversion algorithms. For the on-orbit test simulation, the Sun model consists of the Lambertian scattering sphere and emitting spheroid rays, the Amon-Ra instrument is a two-channel including a broadband scanning radiometer (energy channel) and an imager with ${\pm}2^{\circ}$ FOV (visible channel). The solar radiation produced by the Sun model is directed to the instrument viewing port and traced through the dual channel optical train. The instrument model is rotated on its rotation axis and this gives a slow scan of the Sun model over the full field of view. The direction of the incident lights are fed with scanned images obtained from the visible channel instrument. The instrument responsivity was computed by the ratio of the incident radiation input to the instrument output. In the radiometric simulation, especially, measured BRDF of the 3D CPC was used for scattering effects on radiometry. With diamond turned 3D CPC inner surface, the anisotropic surface scattering model from the measured data was applied to ray tracing computation. The technical details of the on-orbit test simulation are presented together with field-of-view calibration plan.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2158-2165
• /
• 2023

Marine radioactivity monitoring is critical for taking immediate action in case of unexpected nuclear accidents at nuclear facilities located near coastal areas. Especially when the level of contamination is not predictable, mobile monitoring systems will be useful for wide-area ocean radiation survey and for determination of the level of radioactivity. Here, we used a silicon photomultiplier and a high-efficiency GAGG crystal to fabricate a compact, battery-powered gamma spectroscopy that can be used in an ocean environment. The developed spectroscopy has compact dimensions of 6.5 × 6.5× 8 cm³ and weighs 560 g. We used LoRa, a low-power wireless protocol for communication. Successful data transmission was achieved within 1.4 m water depth. The developed gamma spectroscopy was able to detect radioactivity from a ¹³⁷Cs point source (3.7 kBq) at a distance of 20 cm in water. Moreover, we demonstrated an unmanned radioactivity monitoring system in a real sea by combining unmanned surface vehicle with the developed gamma spectroscopy. A hidden ¹³⁷Cs source (3.07 MBq) was detected by the unmanned system at a distance of 3 m. After successfully testing the developed mobile spectroscopy in an ocean environment, we believe that our proposed system will be an effective solution for mobile real-time marine radioactivity monitoring.