• Management & Information Systems Review
• /
• v.39 no.1
• /
• pp.35-57
• /
• 2020

Recently, research F&E(Facilities and Equipment) have become very important as tools and means to lead the development of science and technology. The government has been continuously expanding investment budgets for R&D and research F&E, and the need for efficient operation and systematic management of research F&E built up nationwide has increased. In December 2010, The government developed and completed a standardized classification system for national research F&E. However, accuracy and trust of information classification are suspected because information is collected by a method in which a user(researcher) directly selects and registers a classification code in NTIS. Therefore, in the study, we analyzed linearly using linear discriminant analysis(LDA) and analysis of variance(ANOVA), to measure the classification accuracy for the standardized classification system(8 major-classes, 54 sub-classes, 410 small-classes) of the national research facilities and equipment established in 2010, and revised in 2015. For the analysis, we collected and used the information data(50,271 cases) cumulatively registered in NTIS(National Science and Technology Service) for the past 10 years. This is the first case of scientifically verifying the standardized classification system of the national research facilities and equipment, which is based on information of similar classification systems and a few expert reviews in the in-outside of the country. As a result of this study, the discriminant accuracy of major-classes organized hierarchically by sub-classes and small-classes was 92.2 %, which was very high. However, in post hoc verification through analysis of variance, the discrimination power of two classes out of eight major-classes was rather low. It is expected that the standardized classification system of the national research facilities and equipment will be improved through this study.

• 한국해양학회지
• /
• v.27 no.3
• /
• pp.237-246
• /
• 1992

In order to examine controlling factors on primary productivity and assimilation Number of phytoplankton, chlorophyll-a concentrations, light intensity, temperature, salinity and transparency were measured in the Kyonggi Bay and in the mid0eastern coast of Yellow Sea from March 1989 to October 1990. Chlorophyll-a concentration of phytoplankton ranged from 0.91 to 4.30 ug/; in the Kyonggi Bay, and from 0.78 to 4.97 ug/l in the mideastern coast of Yellow Sea. Daily averaged primary productivities and annual primary productivities of phytoplankton ranged from 37.23 to 1104.44 (averaged 361.54) mgC/m$^2$/day, 131.96hC/m$^2$/yr in the mid0eastern coast of Yellow Sea, respectively. Assimilation Number of phytoplankton ranged from 1.47 to 28.28 mgC/mg chl-a/hr in the Kyonggi Bay, and of phytoplankton in the Kyonggi Bay was higher than that of the mid0eastern coast of Yellow Sea. Light utilization efficiencies (a) in the P-I curve ranged from 0.03 to 0.93 [mgC/mg chl-a/hr]/[ue/m$^2$/sec]in the Kyonggi Bay, and from 0.01 to 0.62 [mgC/mg chl-a/hr]/[ue/m$^2$/sec] in the mid-eastern coast of Yellow Sea. Their results indicated that phytoplankton in the Kyonggi Bay utilized light more efficiently than those of the mid0eastern coast of Yellow Sea. The average values of I/SUB k/ were 48.15 ue/m$^2$/sec in the Kyonggi Bay, and 120.37 uE/m$^2$/sec in the mid-eastern coast of yellow Sea. It means the phytoplankton populations in the Kyonggi Bay seem to be adapted to lower light intensity than those of the mid-eastern coast of Yellow sea.

• Korean Journal of Remote Sensing
• /
• v.14 no.2
• /
• pp.175-195
• /
• 1998

Automatic lineament extraction algorithms had been developed by various researches for geological purpose using remotely sensed data. However, most of them are designed for a certain topographic model, for instance rugged mountainous region or flat basin. Most of common topographic characteristic in Korea is a mountainous region along with alluvial plain, and consequently it is difficult to apply previous algorithms directly to this area. A new algorithm of automatic lineament extraction from remotely sensed images is developed in this study specifically for geological applications. An algorithm, named as DSTA(Dynamic Segment Tracing Algorithm), is developed to produce binary image composed of linear component and non-linear component. The proposed algorithm effectively reduces the look direction bias associated with sun's azimuth angle and the noise in the low contrast region by utilizing a dynamic sub window. This algorithm can successfully accomodate lineaments in the alluvial plain as well as mountainous region. Two additional algorithms for estimating the individual lineament vector, named as ALEHHT(Automatic Lineament Extraction by Hierarchical Hough Transform) and ALEGHT(Automatic Lineament Extraction by Generalized Hough Transform) which are merging operation steps through the Hierarchical Hough transform and Generalized Hough transform respectively, are also developed to generate geological lineaments. The merging operation proposed in this study is consisted of three parameters: the angle between two lines($\delta$$\beta$), the perpendicular distance($(d_ij)$), and the distance between midpoints of lines(dn). The test result of the developed algorithm using Landsat TM image demonstrates that lineaments in alluvial plain as well as in rugged mountain is extremely well extracted. Even the lineaments parallel to sun's azimuth angle are also well detected by this approach. Further study is, however, required to accommodate the effect of quantization interval(droh) parameter in ALEGHT for optimization.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.413-422
• /
• 2022

Barnea manilensis is a bivalve which bores soft rocks, such as, limestone or mudstone in the low intertidal zone. They make burrows which have narrow entrances and wide interiors and live in these burrows for a lifetime. In this study, the morphology and the microstructure of the valve of rock-boring clam B. manilensis were observed using a stereoscopic microscope and FE-SEM, respectively. The chemical composition of specific part of the valve was assessed by energy dispersive X-ray spectroscopy (EDS) analysis. 3D modeling and structural dynamic analysis were used to simulate the boring behavior of B. manilensis. Microscopy results showed that the valve was asymmetric with plow-like spikes which were located on the anterior surface of the valve and were distributed in a specific direction. The anterior parts of the valve were thicker than the posterior parts. EDS results indicated that the valve mainly consisted of calcium carbonate, while metal elements, such as, Al, Si, Mn, Fe, and Mg were detected on the outer surface of the anterior spikes. It was assumed that the metal elements increased the strength of the valve, thus helping the B. manilensis to bore sediment. The simulation showed that spikes located on the anterior part of the valve received a load at all angles. It was suggested that the anterior part of the shell received the load while drilling rocks. The boring mechanism using the amorphous valve of B. manilensis is expected to be used as basic data to devise an efficient drilling mechanism.

• Korean Journal of Agricultural Science
• /
• v.2 no.1
• /
• pp.61-100
• /
• 1975

This study has been made to find out the possibilty of successfully using the following $K_2O$ recommended equation $K_2O\;kg/10a=(Ko/\sqrt{Ca+Mg}-Ks/\sqrt{Ca+Mg})sqrt{Ca+Mg}.\;47.\;B\;D$. where $Ko/sqrt{Ca+Mg}=0.03518+0.0007658\;Sio_2/O.M$. $K_Ssqrt{Ca+Mg}$=Exchangeable K me/100g/$\sqrt{Total\;soluble(Ca+Mg)me/100g\;in\;Soil}$ B. D. =Bulk density of top soil, when the dose of Nitrogen for rice is estimated from the following equation: $N\;kg/10a=(4.2+0.096\;SiO_2/O.M).F$ where $F=0.907+0.263x-0.013x^2$ $SiO_2/O.M=(available\;SiO_2=ppm)/(organic\;matter\;%)$in soil For this. two field experiments. one in sandy and the other in clay paddy soil. have been conducted using 3 levels of wollastonite (0, 500, 100kg/10a) as main treatments; 3 levels of $K_2O$ application were used as sub-plots. These were as follows : (1) 8kg of $K_2O$/10a regardless of the K activity-$K/\sqrt{Ca+Mg}$; (2) kg of $K_2O$/10a estimated from the above equation. and (3) same as (2) above plus additional 30% of $K_2O$. The dose of N kg/ 10a was determined from the above equation based on the value of $SiO_2$/O.M. ratio in each treatment. There were three replications. The leading variety of rice in Chung Chong Nam Do area. Akibare (introduced from Japan) was used. The data obtained. through soil and plant analysis and growth and yield observations. have been throughly examined to attain the following summarized conclusions. 1. The nitrogen dose. estimated from the above equation. was in excess for optimum growth of the rice variety Akibare; indicating the necessity of modification onthe value of "F" or the constants in the equation. The concept of using $SiO_2$/O.M. in the equation was shown to be applicable. 2. The dose of potash. estimated from the respective equation given above. also was in excess of the rice requirements indicating the necessity of minor change in the estimation of $Ko/\sqrt{Ca+Mg}$ value and some great modification in the calculation of $Ks/\sqrt{Ca+Mg}$ value for the equation; however the concept of using $K/\sqrt{Ca+Mg}$ as a basis of $K_2O$ recommendation was shown to be quite reasonable. 3. It was found. from the correlation study using the data of paddy yield and amount of $K_2O$ absorbed by rice plants that the substitution of the value of $Ks/\sqrt{Ca+Mg}$ in the equation for the vaule $Ks/\sqrt{Ca+Mg}=0.037+0.78K\;me/100g$ soil was much more applicable than using the value calculated from the data of soil and wollastonite analysis.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.5
• /
• pp.1390-1401
• /
• 2020

This study is a descriptive research to identify the relationship among violence experience, resilience and job stress of nurses working in emergency department. The subjects of this study were 143 nurses with over one year working in emergency departments of 6 hospitals located in D city and C city and collected data through structured questionnaire. It was from November 6th to November 15th. The degree of violent experience of the subjects was 1.26 ± 1.31 out of 4. The average score of resillience was 2.50 ± 0.55 out of 4. The average score of job stress was 3.62 ± 0.49 out of 5. The result of correlation between violence experience, resilience and job stress, among the sub factors, in the correlation among violence experience and job stress sub factors, verbal violence experience was significantly positively correlated with nursing work(r=.194, p=.010), role conflict stress(r=.158, p=.030), and physical threat experience was positively correlated with nursing work(r=.200, p=.008), role conflict(r=.162, p=.027), and conflict with doctor(r=.145, p=.042). In the correlation between resilience and job stress sub factors, nursing work stress is hardness(r=-.189, p=.012), persistence(r=-.165, p=.025), and optimism (r=-.186, p=.013) and there was a negative correlation with the region. Expertise stress is hardness(r=-.230, p=.003), persistence(r=-.195, p=.010), optimistic(r=-.194, p=.010) and there was a negative correlation. Nurse-treated stress was positively correlated with spirituality(r=.154, p=.033). In the subcategory correlations of resilience and violent experience, the hardness had a negative correlation with the physical threat(r=-.150, p=.037) experience. The persistence was negatively correlated with the experience of physical threats(r=-.138, p=.050). The optimism was negatively correlated with the experience of physical violence(r=-.151, p=.036). As a result, it is necessary to create a safe working environment free from violence and to reinforce training on how to deal with violence in order to reduce the job stress of emergency department nurses. In addition, measures to cope with stress according to age and work experience and programs to increase resilience should be developed and mediated to reduce the job stress of emergency department nurses.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.183-198
• /
• 1997

This case study was conducted by verification the site characteristics based on the questionnaire and interview obtained from the all factories located at No. 1 developing area in Kumi industrial complex. The site characteristics were presumed from the process of location behavior and spatial linkage. Kumi industrial complex was developed to improve export industry at national levels by providing chief land price and benefiting various tax. Kumi industrial complex which enticed many factories is playing an important role in export industry in Korea. At beginning, the detention of large enterprises promoted the establishment of related small to medium sized factories into the complex. Two distinctive industries. textile and electronic, were reflected by the purpose to establish the complex and industrial characteristics of Taegu city. respectively. In Kumi industrial complex, positive responses on traffic and raw material supply and negative reactions on the environmental impact on social community as well as high labor charge were investigated. Especially the higher labor cost prevented to hire laborers effectively. In the linkages of spatial and raw material, most factories in the complex depended on the availability of out side the Kumi city. For the textile factories, the supply of raw material and parts were relied on Taegu and/or other cities, whereas in electronic factories purchased them mainly from other cities and partly from abroad. Although questionnaire and interview suggested it, most of the parts were supplied by a parts maturing companies on the complex to a few large enterprises. In the marketing linkage, textile factories revealed higher relation-ship with the foreign countries and sewing factories in Korea. On the other hand, electronic factories have strong relation-ships in the marketing linkage to the parts supplying companies in the complex or large-scale resembling companies in other cities. In the textile companies, the right for decision on purchasing raw materials and parts is belonging to the owner whereas mother enterprise usually have the right for the marketing. In the case of the electronic factories, all the purchasing activities are related to the sub-contracting companies. In the service linkage, the Quality of the service created spatial distinction. There was high linkages on inside of Kumi complex for the low grade services such as repairing and installing machines, whereas strong linkages on outside of the complex for the high grade services such as management, law, taxation, new product development. and manufacturing technology. In the linkages of activity on the R&D (research and development), electronic factories do not have sufficiently qualified institutes in the complex. Strong regional linkages in the field of textile and electronic industries revealed limitations of the local industrial complex. In the sub-contracting linkage, high linkage ship within Kumi boundary reflected the characteristics of industrial site in the complex. There, most decisions by the companies centered by the mother enterprise.

• Ecology and Resilient Infrastructure
• /
• v.9 no.1
• /
• pp.1-14
• /
• 2022

The total maximum daily load (TMDL) implemented in Korea mainly manages the mainstream considering a single common pollutant and river discharge, and the river system is divided into unit watersheds. Changes in the water quality of managed rivers owing to the water quality management in tributaries and unit watersheds are not considered when implementing the TMDL. In addition, it is difficult to consider the difference in the load of pollutants generated in the tributary depending on the conditions of the water quality change in each unit watershed, even if the target water quality was maintained in the managed water system. Therefore, it is necessary to introduce the total maximum load management at tributaries to manage the pollution load of tributaries with a high degree of pollution. In this study, the HSPF model, a watershed runoff model, was applied to the target areas consisting of 53 sub-watersheds to analyze the effect of water quality changes the in tributaries on the mainstream. Sub-watersheds were selected from the three major areas of the Paldang water system, including the drainage basins of the downstream of the South Han-River, Gyeongan stream, and North Han-River. As a result, BOD ranged from 0.17 mg/L to 4.30 mg/L, and was generally high in tributaries and decreased in the downstream watershed. TP ranged from 0.02 mg/L - 0.22 mg/L, and the watersheds that had a large impact on urbanization and livestock industry were high, and the North Han-River basin was generally low. In addition, a pollution source reduction scenario was selected to analyze the change in water quality by the amount of pollution load discharged at each unit watershed. The reduction rate of BOD and TP according to the scenario changes was simulated higher in the watershed of the downstream of the North Han-River and downstream and midstream of the Gyeongan stream. It was found that the benefits of water quality reduction from each sub-watershed efforts to improve water quality are greatest in the middle and downstream of each main stream, and it is judged that it can be served as basic data for the management of total tributaries.

• Journal of Food Hygiene and Safety
• /
• v.20 no.4
• /
• pp.258-266
• /
• 2005

Licorice Extract and Erythritol, food additives used in korea, are widely used in foods as sweetener. Its application for use in food is regulated by the standard and specification for food additives but official analytical method far determination of these sweetener in food has not been established. Accordingly, we has been carried out to set up analytical method of the glycyrrhizic acid in several foods by the way of thin layer chromatography and high performance liquid chromatography glycyrrhizic acid is qualitative anaylsis technique consists of clean-up with a sep-pak $C_{18}$ cartridge, separation of the sweeteners by Silica gel 60 F254 TLC plate using 1-butanol:4Nammonia solution:ethanol (50:20:10) as mobile solvent. Also, the quantitative analysis for glycyrrhizic acid, was performed using Capcell prk $C_{18}$ column at wavelength 254nm and DW:Acetonitrile (62:38 (pH2.5)) as mobile phase. and we has been carried out to set up analytical method of the erythritol in several foods by the way of high performance liquid chromatography. erythritol is qualitative anaylsis technique consists of clean-up with a DW and hexane. The quantitative analysis for erythritol, was performed using Asahipak NH2P-50 column, Rl and DW:Acetonitrile (25:75) as mobile phase. The glycyrrhizic acid results determined as glycyrrhizic acid in 105 items were as follows; N.D$\∼$48.7ppm for 18 items in soy sauce, N.D$\∼$5.3ppm for 12 items in sauce, N.D$\∼$988.93ppm for 15 items in health food, N.D$\∼$180.7ppm for 26 items in beverages, N.D$\∼$2.6ppm for 8 items in alcoholic beverages repectively and ND for 63 items in the ethers. The erythritol results determined as erythritol in 52 items were as follows; N.D$\∼$155.6ppm for 13 items in gm, N.D$\∼$398.1ppm for 12 items in health foods repectively and ND for 45 items in the others.

• Korean journal of applied entomology
• /
• v.54 no.2
• /
• pp.91-97
• /
• 2015

The sweetpotato whitefly, Bemisia tabaci, is the major insect pest that transmitted over 100 plant viruses including tomato yellow leaf curl virus (TYLCV) of tomato plant as virus vector in the world. In this study, cDNA library of whitefly was constructed using Gateway system for selecting target gene in order to control of B. tabaci using virus-induced gene silencing (VIGS) vector with RNAi. First of all, when using oligo d(T) rimer, the calculated titer of cDNA library was confirmed with $1.4{\times}10^4$ clones and average insert sizes was confirmed with 1 kb. However, insert size was very big for construction of cDNA. Otherwise, when using attB-N25 random primer and sonication for 6 sec, the calculated titer of cDNA library was confirmed with $1.04{\times}10^5$ clones. But mostly insert band wasn't identified on the electrophoresis, because it seemed that insert size is too small (${\leq}100bp$), also the size of identified insert was somewhat big. Finally, when using oligo d(T) primer and sonication for 1 sec, cDNA insert of whitefly was appropriated for VIGS with 300-600 bp. However, cDNA sequence included a poly A and titer was very low to $5.2{\times}10^2$ clones. It was supposed that heat shock transformation was used instead of electro-transformation. It is considered that when constructing cDNA library for using VIGS vector, (1) random primer should be used for First strand cDNA synthesis in order to remove poly A and (2) sonication for 1 sec should be performed in order to get appropriated insert size and (3) electro-transformation should be performed in order to improve transformation efficiency.