• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.283-285
• /
• 2002

The paper describes a study of selection of existing a.c. Transmission facilities converted fur use with d.c. system. In order to increasing the power transfer capability of existing a.c. transmission facilities, d.c. is one of good alternatives. Some advantages and disadvantages of this method are discussed, and the selection method of existing transmission facilities for use with d.c. considering economics and stability is presented in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1313-1315
• /
• 1996

This paper presents a new method to obtain more stable and precise A/D conversion for remote sensing use. Hardware is designed to compensate offset voltage and drift & temperature characteristics, as well as to perform dual slop A/D converter by using single chip microprocessor. Serial communication program which is based on ASCII code commands is also developed to add initial setup & calibration functions as well as to perform A/D data communication. Proposed method will give a good applications to the industrial field where a high precision remote sensing is required.

• 대한수학회지
• /
• 제45권4호
• /
• pp.1075-1087
• /
• 2008

We study a class of KMS-symmetric quantum Markovian semigroups on a quantum spin system ($\mathcal{A},{\tau},{\omega}$), where $\mathcal{A}$ is a quasi-local algebra, $\tau$ is a strongly continuous one parameter group of *-automorphisms of $\mathcal{A}$ and $\omega$ is a Gibbs state on $\mathcal{A}$. The semigroups can be considered as the extension of semi groups on the nontrivial abelian subalgebra. Let $\mathcal{H}$ be a Hilbert space corresponding to the GNS representation con structed from $\omega$. Using the general construction method of Dirichlet form developed in [8], we construct the symmetric Markovian semigroup $\{T_t\}{_t_\geq_0}$ on $\mathcal{H}$. The semigroup $\{T_t\}{_t_\geq_0}$ acts separately on two subspaces $\mathcal{H}_d$ and $\mathcal{H}_{od}$ of $\mathcal{H}$, where $\mathcal{H}_d$ is the diagonal subspace and $\mathcal{H}_{od}$ is the off-diagonal subspace, $\mathcal{H}=\mathcal{H}_d\;{\bigoplus}\;\mathcal{H}_{od}$. The restriction of the semigroup $\{T_t\}{_t_\geq_0}$ on $\mathcal{H}_d$ is Glauber dynamics, and for any ${\eta}{\in}\mathcal{H}_{od}$, $T_t{\eta}$, decays to zero exponentially fast as t approaches to the infinity.

• 해양환경안전학회지
• /
• 제20권6호
• /
• pp.752-759
• /
• 2014

난류유동에 의한 소음은 계산비용의 관점에서 음향 상사법을 이용하여 전산유체 기법과 결합해 다양한 해석모델이 연구되고 있다. FW-H 음향상사법을 이용한 유동소음해석의 연구가 활발히 이루어지고 있으나, 기존 문헌들의 결과에서는 계산비용의 관점에서 난류유동에 의한 소음성분을 생략하고 있다. 그러나, 최근의 연구에서 유동소음특성에 있어 난류소음의 중요성이 밝혀진바 있다. 본 논문에서는 RANS 난류모델과 투과성 경계면을 이용한 Permeable FW-H 음향상사법을 이용한 난류유동소음해석에 대해 연구하였다. 2D실린더에 대하여 직접적으로 변동압력을 추출하는 직접법과 난류성분을 고려하지 않은 FW-H 상사법, 또 난류소음의 성분을 포함하는 Permeable FW-H 방법의 경우를 비교하였다. Permeable FW-H 방법을 통해 일반적으로 적용되는 FW-H 방법에서 해석 불가능한 난류에 의한 소음의 영향을 기존의 FW-H 방법과 동일한 계산비용으로 예측할 수 있었고, 적절한 투과성 경계면 설정을 통해 높은 정확도의 해석이 가능했다. Permeable FW-H 방법을 통한 난류유동해석 절차를 확립하였으며, 그 유용성을 확인했다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1619-1621
• /
• 2007

Novel optical measurement systems and improved cell configurations for measuring of azimuthal anchoring energies were developed. The difference between the mechanical rubbing direction and the optical easy axis that caused errors in the previous azimuthal anchoring energy measurement was compensated. In addition, the measurement accuracy of the twist angle and therefore the azimuthal anchoring energy was greatly enhanced. As a result, we were able to obtain valid azimuthal anchoring energy values for different alignment layers.

• Journal of Welding and Joining
• /
• 제30권4호
• /
• pp.44-48
• /
• 2012

H-beam used for stiffening the upper structure of ocean plant is cut in the various shapes. The cutting process of the H-beam is done manually and requires a long time and high cost. Therefore, automation of H-beam cutting is an important task. This research aims to develop a 3-D simulator to build the automatic H-beam cutting system and to determine the optimal cutting method. The automatic H-beam cutting system composes of 6 robots including 2 cutting robots hang to a crane and 1 conveyer. The appropriate system layout for covering the various sizes and types of H-beam was tested and determined using the simulator. The H-beam cutting system uses a hybrid type of plasma and gas cutting because of special cutting shapes of H-beam. The cutting area of each cutting method should be properly divided according to the size and shape of H-beam to shorten the total cutting time. Additionally the collision between a robot and a robot or a robot and H-beam should be avoided. The optimal cutting method for the shortest cutting time without the collision could be found for the various cutting conditions by use of the simulator. 2 simulation samples shows the availability of the simulator to find the optimal cutting method.

• 대한조선학회논문집
• /
• 제49권3호
• /
• pp.213-221
• /
• 2012

The present study numerically investigates the interaction between a free-surface and flow around a circular cylinder over a moving wall. In order to simulate the flow past the circular cylinder over a moving wall near a free-surface, this study has adopted the direct-forcing/fictitious domain (DF/FD) method with the level set method in the Cartesian coordinates. Numerical simulation is performed for a Reynolds numbers of 100 in the range of $0.25{\leq}g/D{\leq}2.00$ and $0.5{\leq}h/D{\leq}2.00$, where g/D and h/D are the gaps between the cylinder and a moving wall and the cylinder and a free-surface normalized by cylinder diameter D, respectively. According to g/D and h/D, the vortex structures have been classified into three patterns of the two-row, one-row, steady elongation. In general, both of g/D and h/D have the large values which mean the cylinder is far away from the wall and the free-surface, two-row vortex structure forms in the wake. When g/D decreases, the two-row vortex structure gradually transfers into the one-row vortex structure. When the g/D reveals the critical value below which the flow becomes steady state, resulting in the steady elongation vortex.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.566-572
• /
• 2007

본 연구에서는 DME 직접 합성을 위한 혼성촉매가 두 가지 방법으로 제조되었으며, 이들의 촉매적 활성이 조사되었다. DME 합성을 위한 혼성촉매는 메탄올 합성과 메탄올 탈수반응에 촉매적 활성을 가진 성분들로 제조되었다. 메탄올 합성촉매는 Cu와 Zn이 함유된 전구물질로부터 합성되었으며, 메탄올 탈수촉매는 ${\gamma}-Al_2O_3$를 이용하였다. 두 촉매는 물리혼합법과 침전법에 의해서 혼성촉매로 제조되었다. 물리혼합법은 두 촉매를 분말상태에서 혼합하는 것이며, 침전법은 ${\gamma}-Al_2O_3$ 촉매상에 Cu-Zn 또는 Cu-Zn-Al 성분을 퇴적시키는 방법이다. 제조된 촉매의 물리적 특성을 조사하기 위하여 X선 회절법에 의한 결정구조, 질소흡착에 의한 BET 표면적, $N_2O$ 화학흡착에 의한 Cu의 표면적 그리고 주사전자현미경에 의한 표면형상 등이 조사되었다. 또한 이들 혼성촉매의 촉매적 활성은 여러 가지 반응조건을 변화시키면서 조사되었다. 이때 반응온도는 $250{\sim}290^{\circ}C$, 반응압력은 30~70 atm, $[H_2]/[CO]$ 몰비는 0.5~2.0, 그리고 공간속도는 $1,500{\sim}6,000 h^{-1}$ 촉매활성이 조사되었다. 반응성 실험 결과로부터 침전법으로 제조된 혼성촉매(CP-CZA/D)가 물리혼합법으로 제조된 혼성촉매(PM-CZ+D)보다 우수한 반응성을 나타냄을 확인할 수 있었으며, 특히 반응 온도, 압력, $[H_2]/[CO]$ 비, 공간속도가 각각 $260^{\circ}$, 50 atm, 1.0, $3,000h^{-1}$인 조건에서 침전법에 의해 제조된 촉매의 CO 전화율이 72%로 물리혼합법으로 제조된 촉매보다 약 20% 이상 높았다. $N_2O$ 화학흡착실험으로부터 Cu 표면적을 측정한 결과, PM-CZ+D 혼성촉매보다 CP-CZA/D 혼성촉매의 Cu 표면적이 더 높았다. 그러므로 침전법으로 제조된 혼성촉매상의 Cu입자가 더 잘 분산되었기 때문에 촉매의 활성이 개선된 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1754-1756
• /
• 2002

This paper deals with an effective installation method of lightning protective devices for information and communication facilities. Due to the potential difference between grounding of the AC power lines and communication lines, the equipments connected to the communication lines are easily damaged by lightning surges. So we have examined the behaviors of surge protective devices against lightning surges from the AC power lines and signal lines, and the coordination effects of SPD installation method were investigated. As a result, it was confirmed that the bypass arrester method and common grounding method were very effected.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.549-550
• /
• 2007