• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.841-849
• /
• 2013

In this study, a 2-step stamping model with an additional 1st stamping tool is proposed to reduce stamping flaws in the curved parts of a dimple in a nuclear fuel spacer grid. First, the strains of curved part of dimple are characterized via a comparison with strain solutions in pure bending. A reference 2D finite element (FE) model of 1-step stamping is then established, and the corresponding maximum strain is obtained. By varying the values of design variables of the 1st stamping tool in the 2-step stamping model, FE solutions are obtained to express the strain as a function of process variables, which provides the optimum values of process variables. Finally, applying these optimum values to a 3D FE model, we demonstrate the enhanced formability of the proposed 2-step stamping model.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.60.1-60.1
• /
• 2015

High energy photons and mechanical energy produced by the process of star formation result in copious FIR molecular and atomic lines, which are important coolants of the system. Photons thermally or mechanically induced could dissociate water in the dense envelope to change relative abundances among the species of O, OH, and H2O. Here we analyze OH emission lines toward embedded young stellar objects (YSOs) observed as part of the Herschel open time key program, 'Dust, Ice, and Gas In Time (DIGIT)' in order to study the physical conditions of associated gas and the energy budget loaded on the OH line emission. According to our analysis of the Herschel/PACS spectra, OH emission peaks at the central spaxel in most of sources, but several sources show spatially extended emission structures. In the extended emission sources, the distribution of OH emission is correlated with that of [OI] emission and extended along the outflow directions. Considering the diversity of source properties, ratios between detected OH lines are relatively constant among sources. In addition, each OH line has strong correlation with bolometric luminosity. In order to determine the physical conditions of YSOs, we adopt several methods for the analysis of the OH lines: rotational diagram, non-LTE LVG analysis, and a 2-D PDR code. From the simple LVG analysis, we find that the thermal solution with the dense ( > $10^7cm^{-3}$) and warm ( ~ 100 K) OH gas reproduces the ratios of detected OH lines. However, our self-consistent PDR 2-D model, which can deal with the IR-pumping effect from the central protostar as well as the warm dust in situ, cannot fit the observational results, suggesting that an irradiated shock model is necessary for a better interpretation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.77-82
• /
• 2005

Partial response maximum likelihood (PRML) detection using the Viterbi algorithm involves the calculation of likelihood metrics that determine the most likely sequence of decoded data. In general, it is assumed that branches at each node in the trellis diagram have same probabilities. If modulation code with minimum and maximum run-length constraints is used, the occurrence ratio (Ro) of each particular pattern is different, and therefore the assumption is not true. We present a calculation scheme of the likelihood metrics for the PRML detection using the occurrence ratio. In simulation, we have tested the two (1,7) run-length-limited codes and calculated the occurrence ratios as the orders of PR targets are changed. We can identify that the PRML detections using the occurrence ratio provide more than about 0.5dB gain compared to conventional PRML detections at 10/sup -5/ BER in high-density magnetic recording and optical recording channels.

• Korean Institute of Interior Design Journal
• /
• v.13 no.1
• /
• pp.3-10
• /
• 2004

The subject on presentation technique is the class which helps to develop the capability of sensual and creative acts to the students who major in interior design. It helps to understand plasticity and space through the theory of the light and the object, and to develop the capability which realizes one's idea to the actual and visual formations. It also enable the students to explain their designs to the customers by studying the technique which transfers 2D diagram to 3D presentation. Because of these objectives of the class, the departments which major in interior design in Korea consider the class on presentation technique as one of the mun subjects in basic curriculum. However, most of the textbooks related to the presentation technique published in Korea are in the lack of original characteristics for the field of domestic interior design since they refer to or employ the contents of architectural field by directly translating foreign articles. In addition, most of the classes on the presentation technique are taught not by professors but by lecturers so that the class objectives may be varied by their standards for the class. Therefore, it is not easy for each department to set up the one's own characteristics in the field of presentation technique. This study is to analyze the problems in the subjects of presentation technique by investigating the current situations for the subjects on presentation technique in domestic colleges and by surveying the personnels engaged in the field of domestic interior design. Also, the study has the objective to propose the development plan of educational program for the presentation technique in order to enable the student to effectively work in real business.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.2 s.31
• /
• pp.237-248
• /
• 1997

Three types of fatigue cracks frequently observed in the crane runway girders are verified experimentally using two testing-purpose girders with the size of $6400{\times}600{\times}300$ in millimeters. The fatigue cracks are observed in the vicinity of load-bearing points, at the end of gusset plates and at the fillet welded joints between the lower flange and the web. The load-bearing-point cracks are initiated at the intersection of the fillet welds between the upper flange and the web, where the vertical stiffener is located. The cracks grow up toward the diagonal direction of the web. The cracks observed at the fillet welded joints grow up perpendicularly to the crane runway girder. Compared with the JSSC fatigue design code, the joint class is classified as follows: E for the vicinity of load-bearing points, G or H for the end of gusset plates and D for the lower fillet welded joints. The tests reveal that the class of joint classification at the end of gusset plates and at the lower flange coincides with the fatigue design code.

• The KIPS Transactions:PartD
• /
• v.8D no.1
• /
• pp.88-98
• /
• 2001

in this paper, we imlemented design pattern retrieval system for efficient managemant and reusability of design patterns. Pattern is conssisted of property information and meta information id used for similarity measurement on classification and retrieval of patterns.Meta information od used for UML modeling of patterns. We classified design patterns with the empirical scope in addition to Gamma's basic classification. also we used E-SARM for retrieval represented UML diagram with pattern meta information, and simulated the environment so as to obtain best result on applying to retrieval of design pattern. This system is able ro resister new patterns through pattern viewer and manages these patterns with property informaiton and meta information. Thus this system supports efficient management of patterns, UML modeling, priority pattern retrieval, higher reusability and reduces pattern selection cost.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.470-475
• /
• 2017

PURPOSE. The purpose of this study was to identify the complex course of the mandibular canal using 3D reconstruction of microCT images and to provide the diagram for clinicians to help them understand at the interforaminal region in Korean. MATERIALS AND METHODS. Twenty-six hemimandibles obtained from cadavers were examined using microCT, and the images were reconstructed. At both the midpoint of mental foramen and the tip of anterior loop, the bucco-lingual position, the height from the mandibular inferior border, the horizontal distance between two points, and position relative to tooth site on the mandibular canal were measured. The angle that the mental canal diverges from the mandibular canal was measured in posterior-superior and lateral-superior direction. RESULTS. The buccal distance from the mandibular canal was significantly much shorter than lingual distance at both the mental foramen and the tip of anterior loop. The mandibular canal at the tip of anterior loop was significantly located closer to buccal side and higher than at the mental foramen. And the mental canal most commonly diverged from the mandibular canal below the first premolar by approximately $50^{\circ}$ posterior-superior and $41^{\circ}$ lateral-superior direction, which had with a mean length of 5.19 mm in front of the mental foramen, and exited to the mental foramen below the second premolar. CONCLUSION. These results suggest that it could form a hazardous tetrahedron space at the interforaminal region, thus, the clinician need to pay attention to the width of a premolar tooth from the mental foramen during dental implant placement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.9
• /
• pp.668-676
• /
• 2018

In satellite communications, a modulation technique with a low peak-to-average power ratio, high transmission efficiency, and low bit error rate(BER) is required, and differential amplitude and phase shift keying(DAPSK) modulation technique has been appraised as a technology that meets these requirements. However, because conventional DAPSK modulation uses a regular constellation diagram, the Euclidean distance between the symbols in the inner concentric circles of the constellation are quite short. Such a characteristic degrades the BER. In this paper, we propose a DAPSK system that uses an efficient constellation assignment to improve the performance of existing DAPSK systems and evaluate the performance of the proposed scheme. From the simulation results, we confirm that the proposed 16-DAPSK system achieves an signal-to-noise ratio gain of 0.8 dB over the conventional approach at a BER condition of $10^{-4}$ when the number of symbols used in the symbol detector of the receiver is 2.

• International Journal of Human Ecology
• /
• v.7 no.2
• /
• pp.43-52
• /
• 2006

This study analyzed and compared the color characteristics of preferred textiles for blouses and shirts of college students. After the survey of preference in fabrics for blouses and shirts of college students according to season, colors of preferred fabrics were analyzed. Spectral data were measured and a chromaticity diagram was drawn. The color of shirt fabric that college students preferred in the spring/fall was PB (Purple-Blue) and light shades, and in summer, PB color and pale shades. Generally achromatic black or a simple color that is close to an achromatic color, light and soft shades were preferred. For blouse fabric, PB, d (dull) and g (grayish) tones were preferred in spring/fall, G (Green) and It., d. were preferred in summer. Achromatic white and medium, soft shaded chromatic especially greenish colors were preferred. In spring fall, regardless of the clothing item, PB was the most preferred color. Y (Yellow) was the most preferred color for shirts, and for blouses, R (Red) was the most preferred. For achromatic color, black is preferred for shirts, white is preferred for blouses. In summer, the color of preferred shirt fabric was PB, and blouse fabric had a lot of G color. College students prefer simple colors which are close to achromatic colors, and light and soft color were preferred for shirt fabric and they preferred various, medium shaded and closer to pure colors for blouses because college students tend to consider the aesthetic side as important and usually wear blouses less often than shirts.

• Journal of The Korean Astronomical Society
• /
• v.38 no.4
• /
• pp.429-435
• /
• 2005

We present BV CCD photometry for the open clusters Czernik 24 and Czernik 27. These clusters have never been studied before, and we provide, for the first time, the cluster parameters; reddening, distance, metallicity and age. Czernik 24 is an old open cluster with age $1.8{\pm}0.2Gyr$, metallicity $[Fe/H]=-0.41{\pm}0.15dex$, distance modulus $(m-M)_0=13.1{\pm}0.3mag$ ($d=4.1{\pm}0.5kpc$), and reddening $E(B-V)=0.54{\pm}0.12mag$. The parameters for Czernik 27 are estimated to be $age=0.63{\pm}0.07Gyr$, $[Fe/H]=-0.02{\pm}0.10dex$, $(m-M)_0=13.8{\pm}0.2mag$ ($d=5.8{\pm}0.5kpc$), and $E(B-V)=0.15{\pm}0.05mag$. The metallicity and distance values for Czernik 24 are consistent with the relation between the metallicity and the Galactocentric distance of other old open clusters. We find the metallicity gradient of 51 old open clusters including Czernik 24 to be ${\Delta}[Fe/H]/{\Delta}R_{gc}=-0.064 {\pm}0.009dex\;kpc^{-1}$.