• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.6
• /
• pp.1-10
• /
• 2011

This study presents the results of parametric studies of the P-M interaction diagram of hollow prestressed concrete bridge columns. Among the numerous parameters, this study concentrates on concrete compressive strength, prestressing steel reinforcement ratio, effective prestress, the Ds/Do ratio, and the Di/Do ratio. The strength and ductility of hollow prestressed concrete bridge columns were evaluated through quasistatic tests. The P-M interaction diagrams from the codes were different from that of the results, which were in good agreement with AASHTO-LRFD. Nondimensionalized P-M interaction diagrams were developed to predict the design resistance of hollow prestressed concrete bridge columns.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1261-1266
• /
• 2014

Smart shipyard, all of the business of shipyard by using a mobile application, and the rapid spread of smart equipment, the overload of infrastructure due to a variety of mobile services is expected. Because macrocell and femtecell to reduce the overloading of existing infrastructure, additional core network devices have a problem, in this paper, the efficiency of resources than the communication over the existing infrastructure smart shipyard network to improve, to apply the D2D communication technology that can reduce the load on the infrastructure. The proposed routing path plan in accordance with the transfer method and the traffic type of network configuration and D2D equipment navigation and data for applying a smart shipyard. Whether to execute the function to overload traffic in the core network can send to the optimized path was confirmed by using the state transition diagram. Smart shipyard, by applying D2D communication allow efficient traffic handling than conventional communication method.

• Resources Recycling
• /
• v.23 no.5
• /
• pp.21-27
• /
• 2014

A study on the solvent extraction for the recovery of Li from lithium-containing waste solution was investigated using $D_2EHPA$ as an extractant. The experimental parameters, such as the pH of the aqueous solution, concentration of extractant and phase ratio were observed. Experimental results showed that the extraction percentage of Li was increased with increasing the equilibrium pH. More than 50% of Li was extracted in eq. pH 6.0 by 20% $D_2EHPA$. From the analysis of McCabe-Thiele diagram, 95% of Li was extracted by four extraction stage at phase ratio(O/A) of 3.0. Stripping of Li from the loaded organic phases can be accomplished by sulfuric acid as a stripping reagent and 90 ~ 120 g/L of $H_2SO_4$ was effective for the stripping of Li. Finially, Li was concentrated about 11.85 g/L by continuous stripping process, and then lithium carbonate was prepared by precipitation method.

• The KIPS Transactions:PartD
• /
• v.9D no.4
• /
• pp.639-650
• /
• 2002

We have to carry out systematic, definite requirements analysis for the successful development of software. The UML gives the ways to grasp user or customer requirements and decide the boundary of business systems from the use case modeling. This paper presents how to extract use case diagram from the requirements specification systematically by applying the standardized rules as a part of the study for use case modeling. We modify requirements specification by applying $R_{RS}$ (Rules for Requirements Specification) and extract actor, use case, relationship by applying $R_{A}$(Rules for Actors), $R_{U}$(Rules for Use Cases) and $R_{R}$(Rules for Relationships) to the modified requirements specification separately and then become to make out use case diagram in the end. By applying the rules presented in this paper to the requirements specification for personnel management, we can reduce the existing difficulties of extracting use case diagram based on the narrative descriptions without any standardized rules.rules.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.6
• /
• pp.262-270
• /
• 2003

In this paper, the characteristics of single-phase line-start permanent magnet synchronous motor driven by constant voltage are analyzed on d-q axis vector diagram and compared with that of current controlled motor. The coupled method of symmetrical coordinates and d-q axis voltage equation are applied to the analysis method like the analysis of single-phase induction motor. From the result of the analysis, it is seen that motors driven by constant voltage source have effects on not only the amplitude of current and torque but also current and current phase angle, so overall characteristics such as power factor and load angle are affected by circuit parameters. For precise analysis and design of single-phase line-start synchronous motor, its characteristics should be analyzed on d-q axis vector plan in consideration of the variation of circuit parameters.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.6
• /
• pp.413-421
• /
• 2007

3D rendering is becoming a common feature of mobile application programs with the rapid advance of mobile devices. Since the existing rendering engines do not provide triangulation functions, mobile 3D programs have focused on an efficient handling with pre-tessellated geometry. In addition, triangulation is comparatively expensive in computation, so it seems that the triangulation cannot be easily implemented on mobile devices with limited resources. Triangulation of 3D geometry is the essential process of visualization of 3D model data and many different triangulation methods have been reported. We developed a light and fast visualization process that involves constrained triangulation based on Voronoi diagram and applied it to a mobile computer application. In this paper, we applied kd-tree to the original incremental construction algorithm and produced new O(nlogn) incremental construction algorithm. And we show a simple and efficient constrained triangulation method based on Voronoi diagram. This paper also describes an implementation of mobile STEP data viewer as an application of our proposed algorithms.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.4 no.1
• /
• pp.30-33
• /
• 1984

• 한국가스학회:학술대회논문집
• /
• 2003.05a
• /
• pp.193-196
• /
• 2003

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.861-868
• /
• 2021

With the development of technology for visualizing big-data, tasks such as intuitively analyzing a lot of data, detecting errors, and deriving meaning are actively progressing. In this paper, we describe the design and implementation of a 3D analysis that collects and stores the writing data in Chinese characters provided by the Korean Classical Database of the Korean Classics Translation Institute, stores and progress the data, and visualizes the writing information in a 3D network diagram. It solves the problem when a large amount of data is expressed in 2D, intuitive that analysis, error detection, meaningful data extraction such as characteristics, similarity, differences, etc. and user convenience can be provided. In this paper, we improved the problems of analyzing Chosun dynasty poetry in Chinese characters using 2D visualization conducted in previous studies.

• Wind and Structures
• /
• v.7 no.1
• /
• pp.13-28
• /
• 2004

A method of numerical analysis without conducting 3D wind tunnel model tests was examined in our previous study for predicting vortex-induced oscillation of bridge girders with span-wise varying geometry. The aerodynamic damping forces measured for plural wind tunnel 2D models were used in the analysis. A further study was conducted to examine the precision of solution obtained by this method. First, the responses of vortex-induced oscillation of two rocking models and a taut-strip bridge girder model with span-wise varying geometry were measured. Next, the responses of these models were numerically analyzed by means of this method, and then a comparison was made between the obtained $Vr-A-{\delta}_a$ contour diagram of each 3D model in the wind tunnel test and the diagram in the numerical analysis. Since close correlations were observed between each two $Vr-A-{\delta}_a$diagrams obtained in the model test and in the analysis in cases where the 3D model did not have strong three-dimensionality, our findings revealed that the predicted solution proved to be reasonably accurate.