• STI Policy Review
• /
• v.2 no.3
• /
• pp.35-44
• /
• 2011

Korea has rapidly increased R&D investment over the last few decades and the intensity of R&D investment is among the highest in the world; however, there are serious concerns about R&D performance and R&D efficiency. This study is to improve the economic assessment methodology regarding a feasibility study for national R&D programs that are thought to be one of the most prominent ways to enhance R&D efficiency. In order to improve the methodology of economic assessment, a few of important factors such as technical or market uncertainty, spillover effect, and R&D contribution ratio should be covered in the model. The focus of this article is technological and market uncertainty that has a close relation with strategic flexibility and utilization potential to increase the value of R&D programs. To improve the current linear and definitive R&D process, a new framework with strategic flexibility is suggested, in which the result of economic assessment that considers technological and market uncertainty is reflected in planning. That kind of feedback process is expected to enhance the value of the program/project as well as R&D efficiency.

• Journal of Korean Society of Archives and Records Management
• /
• v.16 no.3
• /
• pp.179-207
• /
• 2016

This study suggested the necessity of the management of R & D management records produced from government-supported science research institutes (the so-called "gwagichulyeon") and of a record management manual (item). As such, it gathered rules with regard to record management, conducted a survey, and interviewed general R & D managers. As a result of the research, the ratio of the arrangement of R & D managers to R & D management departments is 100%; however, the ratio of the arrangement of record managers is 33.3%-50%, and the ratio of the arrangement of record management departments is 23.1%, which was poor. The enactment ratio of record management rules is 26.4%, and 73.7% of institutes has managed their records under the provision only of document management rules or only of office management rules. R & D management records has been collected according to an institute's capability without a prescribed collection scope, and the conditions with regard to the omission, damage, and loss of records were poor. There are institutes that did not comprehend the production status of R & D management records. Thus, as a response, this study suggested a record management manual (item) established for the arrangement duties of record managers and record management departments as well as for notifications on the status of R & D management records. In addition, this study produced a standardized collection scope and described how to manage R & D management records.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.6
• /
• pp.254-261
• /
• 2003

This study investigates magnetic circuit design of the Single-phase Line-start Permanent Magnet Synchronous Motor (LSPM) to develop the characteristics in steady state. In this paper, the saliency ratio, that is the ratio of q-axial inductance to d-axial inductance, and the inductance difference between q-axial inductance and d-axial inductance are increased. Design factor is selected permanent magnet position and rotor diameter. The analysis method of the synchronous motor on d-/q- axis coordinates is used for the positive component and the equivalent circuit of the induction motor is applied for the negative component analysis. Back-emf and d-q- axial inductance is analyzed by using 2 dimensional Finite Element Method (FEM). Characteristic analysis results with variation of design factor are reflected magnetic circuit design of LSPM. The characteristics of design model are compared with the characteristic of initial model.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.201-215
• /
• 2002

In this paper, we use a structural equation model to diagnose success factors on commercialization of information and communication technology considering the characteristics of commercialization process in terms of the type of technology, technology provider and technology receiver. The results of our study indicated the following. The transferor's research ability has significant effects on the commercialization by small businesses with low R&D expenditure to sales ratio, and the business management ability plays an important role in the commercialization by the relatively large (over 100 employees) companies with low R&D expenditure ratio. During the commercialization of the technology independently researched by government run institute or university, the transferee's business management ability is crucial to success. To those companies which run the existing business with high R&D expenditure ratio, their ability to utilize technology is essential. When the independently researched technology is used in the new business, the companies' business management ability and the role of technology transfer center are the important factors on the commercialization. Based on these findings, we suggest some strategies to effectively promote R&D efforts for successful commercialization.

• Journal of Biomedical Engineering Research
• /
• v.35 no.6
• /
• pp.192-196
• /
• 2014

Collagen scaffolds were synthesized by cross linking into a solution mixture of 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochlorid(EDC) in ethanol, followed by pressing, cleaning and lyophilization process after the type I atelo-collagen solutions in D.I water(pH3). The experimental conditions are collagen concentration of 1.0 wt%, 3.0 wt%, 5.0 wt% and differential concentration of cross-linker. Then, parametric studies were performed by varying the parameters to investigate the morphology, the porosity, the swelling ratio and the thickness and genotoxicity of the scaffolds. The scaffolds thickness pattern was regular to concentration of the degree of cross-linker and collagen. It was observed that the swelling ratio, the degree of crosslink, and the pore size(thickness of scaffold) can be controlled by adjusting the collagen, crosslinker. Among the parameters investigated, the smallest thickness can be achieved by collagen, crosslinker concentrate condition. The collagen scaffold is induced no genotoxicity. The lowest swelling ratio, as an indication of the highest degree of crosslink, can be obtained by adding crosslink agent.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.1
• /
• pp.30-34
• /
• 2017

The building integrated photovoltaic system (BIPV) attracts attention with regard to the future of the photovoltaic (PV) industry. It is because one of the promising national and civilian projects in the country. Since land area is limited, there is considerable interest in BIPV systems with a variety of angles and shapes of PV panels. It is therefore expected to be one of the major fields for the PV industry in the future. Since the irradiation is different from each installation angle, the output can be predicted by the angles. This is critical for a PV system to be operated at maximum power and use an efficient design. The development characteristics of tilted angles based on data results obtained via long-term monitoring need to be analyzed. The ratio of the theoretically available and actual outputs is compared with the installation angles of each PV module to provide a suitable PV system for the user.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1A
• /
• pp.1-9
• /
• 2010

This paper offers performance analysis of selection decode and forward (DF) networks with differential modulation/demodulation for an arbitrary number of relays in independent but not identically distributed Rayleigh fading channels. We have shown that the selection DF protocol with differential modulation can achieve full diversity in both independent identically distributed (i.i.d.) and independent but not identically distributed (i.n.d.) Rayleigh fading channels, and the performance loss due to using non-coherent detection is not substantial. Furthermore, we study the impact of combining techniques on the performance of the system by comparing a system that uses selection combining (SC) to one that uses maximum ratio combining (MRC). Simulations are performed and show that they match exactly with analytic ones in high SNR regime.

• Asian Journal of Turfgrass Science
• /
• v.10 no.3
• /
• pp.195-211
• /
• 1996

Dictyostelids cellular slime molds were isolated from the soils of Gokneung and Anyang streamside in Korea. The fifteen species including two undescrihed species were identified. These were as follows ; Dictyostelium macrocephalurn D. sphaerocephalum, D. aureum var. aureum, D.mucoroides, D. minutum, Polyspondyium pallidum. D. giganteum, P. violaceum. D. purpureum. D.brefeldianum, D. flavidum, D. mucoroides var. storoniferum, D. septentrionalis, D. aureum var. luteolum,D. aureo-stipes var. aureo-stipes. D. macrocephalum was the dominant species. and D. sphaerocephalum. D. aureum var. avreum were relatively common. D. mucoroides var. storoniferum, D. septentrionalis were the undescrihed species in Korea. In the soils of streamside, dominant species was shifted by D. macrosephalum, D. sphaerocephalum. which were rare in the forest soils. The total clones per gram of streamside soils were greater than that of forest soils, whereas the number of species in streamside was smaller than the in forest soils. As a result, the ratio of the number of clones to species was very high in the soils of streamside, Environmental factors of soil pH, water content, organic content, total nitrogen and total phosphorus made a effect differently on the cellular slime molds community. Key words: Cellular slime molds, D. macrocephalum, D. sphaerocephalum, Shift of dominant species, Environmental factors.

• Journal of Korea Planning Association
• /
• v.54 no.2
• /
• pp.33-45
• /
• 2019

The Legal Floor Area Ratio (L-FAR) has been used as a major urban planning tool for efficient management of land use, landscape, and density. The Developed Floor Area Ratio (D-FAR) in each parcel is realized by such physical and institutional factors as urban tissue, local characteristics, and zoning with the L-FAR. The Achieved Floor Area Ratio (A-FAR), the ratio of the D-FAR to the L-FAR, is the relationship between realized density and the intended/desired outcomes of the regulations. The A-FAR informs the efficiency of L-FAR and its effect on parcels, and is an indicator of the demands of real estate developments under the zoning regulation. This study used detailed data of each parcel's characteristics, including parcel size, road width, and the number of roads bordered by a parcel, to identify the influencing factors on A-FAR. This analysis confirmed that the parcel size has a non-linear negative effect in the residential zone but a linear positive effect on A-FAR in the commercial zone. The width of the parcel's frontage in the commercial zone has a positive effect on the value, while in the residential zone the narrower width has higher A-FAR. In Seoul, the residential zone has higher A-FAR than the commercial zone, which means that the former has a relatively higher development pressure but a lower designated L-FAR. This result reflects that Seoul's residential zone absorbs the demand of commercial uses because of the significant permitting of mixed land use and has high-density residential buildings.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.1 no.4
• /
• pp.305-312
• /
• 1989

Laminal natural convection heat transfer in the annulus between isothermal horizontal non-circular cylinders is studied by solving the Navier-Stokes and energy equation using an elliptic numerical procedure. Results are obtained to determine the effects of the diameter ratio($D_o/D_i$) and Rayleigh number on heat transfer. The diameter ratio is varied from 1.5 to 13.0 at Pr=0.7, H/L=1.5 and $10^3{\leqslant}Ra_L{\leqslant}4{\times}10^4$. It is found that the diameter ratio causes a more significant on the local heat transfer coefficient of lower semi-circular cylinder and plate than upper semi-circular cylinder. The mean Nusselt number increases as the diameter ratio and Rayleigh number increase, and is higher than that of the circular annulus with a same wetted perimeter.