• 제목/요약/키워드: D/d ratio

검색결과 9,650건 처리시간 0.034초

대학생의 음주 및 흡연과 손가락 길이비(2D:4D) (Alcohol intake, smoking, and 2nd to 4th digit ratio of university students)

  • 김수일;김금숙;조근자
    • 한국산학기술학회논문지
    • /
    • 제13권9호
    • /
    • pp.3983-3990
    • /
    • 2012
  • 과도한 음주와 흡연은 인체에 유해하며, 다양한 영향요인들이 있다. 본 연구의 목적은 생물학적 요인인 손가락 길이비(2D:4D)와 음주 및 흡연과의 관계를 파악하는데 있다. 연구대상자는 대학생 435명(남자 121명, 여자 314명)으로 음주와 흡연 관련 설문에 응답한 후 복사기를 이용하여 손가락길이가 측정되었다. 연구 결과, 대학생들의 손가락 길이비는 남자 0.95, 여자 0.96으로 남녀 간에 유의한 차이가 있었다(p<0.001). 음주여부에 따른 손가락 길이비는 여자에서만 왼손에서 유의한 차이가 있었고(p<0.05), 흡연여부에 따른 손가락 길이비는 남자에서만 왼손에서 유의한 차이가 있었다(p<0.05). 음주 및 흡연과 손가락 길이비 사이의 관계는 왼손의 손가락 길이비가 낮을수록 음주량과 흡연량이 많은 것으로 나타났다(p<0.05). 결론적으로, 모체내 테스토스테론의 영향을 받는 손가락 길이비는 흡연 및 음주 선호와 상관관계가 있으므로, 음주와 흡연 예방프로그램이나 절주와 금연프로그램의 진행시 참여자의 손가락 길이비도 하나의 기초자료로 활용될 수 있을 것으로 사료된다.

3D 프린터용 시멘트 복합체의 간극비가 출력성과 적층성에 미치는 영향 (The Effects of Void Ratio on Extrudability and Buildability of Cement-based Composites Produced by 3D Printers)

  • 서지석;이봉춘;김윤용
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제23권7호
    • /
    • pp.104-112
    • /
    • 2019
  • 3D 프린팅용 시멘트 복합체 모르타르의 재료적 특성을 평가하고 굳지 않은 상태에서의 모르타르 간극비를 단일지표로 하여 프린팅이 가능한 성능 범위를 산출하였다. 시험 결과, W/B가 증가하면 모르타르 흐름값은 증가하였으며 밀도와 강도는 감소하였다. SS/B가 증가하면 모르타르 흐름값은 감소하였다. 그러나 강도와 밀도는 특정 SS/B까지 증가하다 감소하였다. Ad/B가 증가할수록 모르타르 흐름값, 밀도, 강도는 감소하였다. 이러한 경향성은 따른 3D 프린팅용 모르타르의 목표 성능 만족하기 위한 배합설계를 어렵게 한다. 한편, 간극비가 증가할수록 모르타르 흐름값은 비례적으로 증가하는 반면 밀도와 강도는 감소하는 경향을 보였으며, 그 상관성은 높게 나타났다. 이는 배합설계에 따른 재료적 특성을 제어하는 단일지표로서 간극비를 활용할 수 있음을 나타낸다. 3D 프린터로 출력 가능한 모르타르 배합범위를 시험한 결과, 간극비가 0.6~0.7일 때 출력이 가능하였다. 이를 검증하기 위해 W/B 35.0 %, SS/B 60.0 %, Ad/B 0.1%를 배합하여 간극비를 0.634로 설계했을 때 출력이 가능하였다. 그러나 3D 프린팅 출력 모르타르의 품질을 향상하기 위해서는 혼화제를 활용하는 추가적인 연구가 필요하다.

침투시험에서의 콘크리트 표적크기 영향 분석 (Concrete Target Size Effect on Projectile Penetration)

  • 김석봉;유요한
    • 한국군사과학기술학회지
    • /
    • 제18권2호
    • /
    • pp.154-159
    • /
    • 2015
  • This paper deals with the effect of concrete target size on penetration of projectiles. We investigated the penetration depth and residual velocity of projectiles using the 2-D axial symmetric model. Most analysis were conducted with 13 kg projectile (striking velocity: 456.4 m/s) and concrete target with compressive strength of 39 MPa. This paper provided penetration depth (or residual velocity) versus ratio D/d (target diameter, D and projectile diameter, d). When the bottom of concrete cylinder was constrained, penetration depth converged to limit depth more than the ratio D/d of 36. The residual velocity of projectile with thin concrete target were investigated. The residual velocity was converged to specific velocity more than the ratio D/d of 16.

2.5Gbps 광통신용 DFB-LD 모듈에 대한 광궤환의 영향 (Effects of the external optical feedback on the DFB-LD modules for 2.5Gbps optical communication system)

  • 박경현;이중기;한정희;조호성;장동훈;박철순
    • 전자공학회논문지A
    • /
    • 제33A권7호
    • /
    • pp.1-14
    • /
    • 1996
  • Effects of the external optical feedback on the optical transmission characteristics were evaluated for 3 kinds of commercialized DFB-LD modules for 2.5Gbps optical communication systems. As a result, intensity noise induced by external optical feedback via generating the external cavity modes deteriorated the transmission performances of sthe DFB-LD modules as much as 1.5dB, 1.2dB, and 1.0dB for the maximum feedback ratio of -8.8dB which corresponds to the worst reflection along the fiber transmission line. Additional penalty of 0.5dB was occurrred when state of polarization of feedback light was adjusted. From the experiments evaluating the isolation ratio of the single polarization optical isolator, decrease of the polarization dependent isolation ratio as much as 10dB from that of specification and the effective isolation ratio as much as 20dB from that of specification was mjor cause of high sensitivity of DFB-LD modules to external feedback. It was suggested that polarization independent optical isolator or single polarization optical isolator with isolation ratio specification of more than 40dB is required for 2.5Gbps DFB-LD modules with complete suppression of external feedback effects.

  • PDF

PNF 하지굴곡패턴운동이 체간근육 활성도에 미치는 영향 (The Effects of PNF Leg Flexion Patterns on EMG Activity of the Trunk)

  • 김경환;기경일;윤혜진
    • PNF and Movement
    • /
    • 제9권3호
    • /
    • pp.19-24
    • /
    • 2011
  • Purpose : The purpose of this study was to analyze the effect of PNF lower extremity flexion pattern on the eletromyographic (EMG) activity in rectus abdominis, internal oblique abdominal, external oblique abdominal, erector spinae. Methods : Twenty-six healthy adults volunteered to participate in this study. Subjects were required complete following two PNF lower extremity patterns; flexion-adduction-external rotation with knee flexion (D1) and flexion-abduction-internal rotation with knee flexion (D2). A paired t-test was used to determine the influence of the PNF two patterns on muscle activity for each muscle and descriptive statistics was used to determine local/global muscle ratio. Results : The D1 pattern was showed significant rectus abdominis (p<.05) and Median of internal oblique/rectus abdominis ratio was 2.23 and internal oblique/external oblique ratio was 1.53. The D2 pattern showed significant erector spinae (p<.05) and Median of internal oblique/rectus abdominis ratio was 3.06 and internal oblique/external oblique ratio was 1.72. Conclusion : The D1 pattern made rectus abdominis activation increase. The D2 pattern made erector spinae activation increase. As compared D1 and D2 pattern on trunk muscle activation, it's will be useful decision making for the trunk muscle strength and stabilization.

GPS 보호비 연구 (A Study on the Protection Ratio of GPS)

  • 유병재;심용섭;조현묵;이일규;홍헌진
    • 한국통신학회논문지
    • /
    • 제36권3A호
    • /
    • pp.296-301
    • /
    • 2011
  • GPS(Global Positioning System)서비스는 다 우선서비스보다 중요성을 갖는 서비스로 분류 된다. 따라서, GPS는 간섭신호로부터 보호할 필요가 있으며 이에 본 논문에서는 비트에러율(BER)을 근거로 GPS의 보호비를 제안하였다. 도출된 최대허용 간섭신호는 -190 dBm/Hz이며 간섭신호 대 잡음비(I/N)값은 -16 dB이다. 도출된 GPS 보호비(I/N)는 GPS의 실제 운용마진을 4 dB로 고려할 경우 -20 dB로 요구된다. 분석결과는 향후 안정적인 GPS 서비스 운용을 위한 국내 GPS 보호기준 제정에 도움을 줄 것으로 기대된다.

2D:4D 비율과 사상체질 및 MBTI 선호유형간의 상관성 연구 (A Study on the 2D:4D Ratio and Its Correlation with the Sasang Constitution and the MBTI Preference Types)

  • 권오현;고호연;이재혁
    • 동의신경정신과학회지
    • /
    • 제28권3호
    • /
    • pp.157-164
    • /
    • 2017
  • Objectives: The purpose of this study is the research of the 2D:4D ratio and its correlation with the Sasang constitution and the MBTI preference types. Methods: A measurement of the 2D:4D ratios of 101 South Korean medical students was performed, the QSCC-II and PSSC-2004 were used to diagnose the Sasang constitution, and MBTI testing was performed to classify the preference types. Results: In the relationship between the Sasang constitution and the 2D:4D ratios, a statistically significant difference is absent in the 2D:4D ratios of the group comprising both sexes in the order of Taeumin, Soyangin, and Soeumin. A statistically significant difference is also lacking in the 2D:4D ratios of the male-only group in the order of Taeumin, Soyangin, and Soeumin. The 2D:4D ratios are higher in the female group only, but again a statistically significant difference is absent. In the 2D:4D ratios according to the MBTI preference type, the 2D:4D ratios of the I, S, F, and P types are higher in the unisex group, but a significant difference is not evident. The 2D:4D ratios of the E, N, F, and P types are higher in the male-only group, but again a significant difference is not evident. In the female-only group, the mean of the 2D:4D ratios of the I, S, F, and P types is higher, but a significant difference is not identifiable. Conclusions: The Sasang constitution and the MBTI preference types did not show statistically significant differences regarding the 2D:4D ratios of the male, female, and unisex groups.

셀룰러 시스템의 간섭에 의한 D2D 시스템의 Outage 확률 분석 (Outage Probability of the Device-to-Device Communication According to the Interference-to-Signal-Ratio Generated by Cellular Networks)

  • 민현기;서우현;박성수;홍대식
    • 대한전자공학회논문지TC
    • /
    • 제48권1호
    • /
    • pp.55-61
    • /
    • 2011
  • 본 논문에서는 device-to-device (D2D) 시스템이 M 개의 셀룰러 단말기들과 상향 링크의 주파수 자원을 공유할 때 셀룰러 단말기들에 의한 간섭과 D2D 통신 단말기 쌍의 신호의 파워 비에 따른 outage 확률을 분석한다. 이 때, D2D 통신 전송기의 최대 전송 파워는 셀룰러 네트워크에 어떠한 해로운 간섭도 발생하지 않게 하기 위해서 엄격하게 제한된다. 수학적 모델에 의해 D2D 통신 수신기의 outage 확률은 셀룰러 사용자 단말기들에 의해 발생하는 간섭 대 선호 비 및 셀룰러 사용자 단말기의 개수, M에 의한 함수로 표현된다. 또한, 셀룰러 사용자 단말기들에 의해 발생하는 간섭 대 신호 비는 D2D 통신 단말기 쌍, 셀룰러 사용자 단말기들, 및 기지국과의 거리의 함수로 표현된다. 얻어진 outage 확률을 이용해서, D2D 통신 시스템의 신뢰성을 쉽게 평가할 수 있다. 또한, 분석의 타당성을 입증하기 위해 모의실험들을 제공한다.

조절자극 방식에 따른 원거리와 근거리 AC/A비에 관한 연구 (The Study of Distance and Near AC/A Ratio by Stimulus)

  • 조태식;김인숙;장정운
    • 한국안광학회지
    • /
    • 제16권4호
    • /
    • pp.417-423
    • /
    • 2011
  • 목적: 본 연구는 근거리 경사 AC/A 비가 원거리 외사위 교정에 적용될 수 있는지를 알아 보기 위하여 원거리 및 근거리 경사 AC/A 비의 차이를 비교하고 또한 계산 AC/A 비와 경사 AC/A 비의 관계에 대하여 연구 하였다. 방법: 타각적 및 자각적 굴절검사에 의한 완전교정 후 원거리 경사 AC/A 비 검사는 -1.00 D를 가입한 후 Howell 시표(3 m용)를 사용하였으며, 근거리 경사 AC/A 비 검사는 +1.00 D, -1.00 D, +2.00 D와 -2.00 D를 각각 가입한 후 Howell-Kim(40 cm 용) 시표를 사용하여 사위검사와 계산 AC/A 비를 측정하였다. 결과: 원거리 사위는 평균 외사위 1.17${\pm}$1.17 $\Delta$, 근거리 평균 외사위 3.71${\pm}$2.80 $\Delta$으로 나타나(t-test. p < 0.001), 원근거리 사위의 상관관계(r = 0.59, p < 0.001)는 비교적 높게 나타났다. 경사 AC/A 비는 측정거리와 조절자극에 따라 다양하였고(r = 0.11~0.53. p < 0.001) 측정거리가 가까울수록 조절자극이 클수록 높았다. 또한 플러스 굴절력보다 마이너스 굴절력에 의한 조절자극이 높게 나타났다(t-test. p<0.001). 또한 계산 AC/A 비가 클수록 경사 AC/A 비는 오히려 낮아지는 음의 상관관계를 보였다. 원거리와 근거리에서 -1.00 D 부가한 경사 AC/A 비는 원거리가 1.30 $\Delta$/D 근거리가 1.68 $\Delta$/D로 근거리 AC/A 비가 유의적인 수준에서 약간 크게 나타났다(t-test. t=1.67, p<0.001). 결론: 본 연구를 통하여 계산 AC/A 비와 경사 AC/A 비의 음의 상관관계를 알 수 있었고, 근거리 경사 AC/A 비가 원거리 경사 AC/A 비보다 작지만 유의적 수준의 차이를 보여 원거리 외사위의 교정은 원거리 경사 AC/A비를 반드시 측정할 필요성이 있음을 알 수 있었다.

수중 가청음에 의한 볼락의 청각 능력 2. 청각 임계비 (The Hearing Ability of Black Rockfish Sebastes inermis to Underwater Audible Sound 2. The Auditory Critical Ratio)

  • 이창헌;서두옥
    • 한국수산과학회지
    • /
    • 제34권2호
    • /
    • pp.151-155
    • /
    • 2001
  • 해양 목장에서 음향 순치 대상 어종으로 사용할 수 있는 볼락의 청각 문턱치를 기본으로 하여 음향 어법의 기초 자료를 제공할 목적으로 볼락의 백색 잡음에 대한 청각 임계비와 학습 및 유집을 위한 방성 음압 강도를 조사한 결과는 다음과 같다. 음압 73, 78, 83dB의 3단계 백색 잡음을 방성하였을 때 볼락의 청각 문턱치는 백색 잡음이 없을 때보다 높게 나타나 마스킹 현상이 나타났고, 주파수 300Hz에서 보다 높게 나타났다. 볼락의 청각 임계비는 측정 주파수 80, 100, 200, 300, 500, 800Hz에서 음압이 대략 28, 34, 26, 30, 47, 52dB이고 마스킹 현상은 주파수 300Hz에서 음압 65dB의 잡음 레벨에서 나타나기 시작하였고 그 외의 주파수에서는 음압 68dB 이상에서 나타났으며, 볼락이 주파수 $200\~300$Hz에서 신호음을 인식하기 위해서는 음압 96dB 이상, 잡음 레벨보다 약 26dB 이상의 높은 음압이 요구되었다.

  • PDF