• Asian-Australasian Journal of Animal Sciences
• /
• 제33권4호
• /
• pp.623-633
• /
• 2020

Objective: Substituting starch with digestible fiber (dF) can improve digestive health of rabbits and reduce costs. Therefore, it is necessary to develop a criterion for dF and starch supply. Effects of the dietary dF-to-starch ratio on pellet quality, growth and cecal microbiota of Angora rabbits were evaluated. Methods: Five isoenergetic and isoproteic diets with increasing dF/starch ratios (0.59, 0.66, 0.71, 1.05, and 1.44) were formulated. A total of 120 Angora rabbits with an average live weight of 2.19 kg were randomly divided into five groups with four replicates. At the end of 40 day feeding trial, cecal digesta were collected to analyse microbiota. Results: The results showed that the dF/starch ratio had linear effects on pellet variables (p<0.01). When the dF/starch ratio was 1.44, the pellets had the lowest powder and highest durability. The dF/starch ratio had unfavorable linear effects on growth variables (p<0.001). When analyzed by quadratic regression, the optimal dF/starch ratios for average weight gain and feed/gain were 0.59 and 0.74, respectively. There were differences in wool yield, fiber length and fiber diameter caused by the dF/starch ratio (p<0.05), and the dF/starch ratios that ranged from 0.66 to 1.06 were appropriate for good results. The cecal microbiota operational taxonomic unit (OTU) number index in the 1.05 dF/starch treatment was higher than that in the 0.66 and 0.71 dF/starch treatments. The higher dF/starch ratio resulted in a higher cecal microbiota OTU number index (p<0.05). The proportion of Ruminococcus in the 0.71 dF/starch treatment was higher than that in the 0.59 dF/starch treatment (p<0.05) Conclusion: The most suitable dF/starch ratio for feed pellet quality is 1.44, and for rabbit growth the optimal range of ratios is from 0.59 to 0.74. With combination of the wool growth, output cost, and cecal microbiota, we suggest that a dietary dF/starch ratio ranging from 0.74 to 1.06 is optimal.

• 한국조경학회지
• /
• 제14권3호
• /
• pp.3-19
• /
• 1987

The purpose of this study was to investigate desirable width / height ratio of enclosed space and to offer basic information for the design of enclosed spaces. The data of this study were gathered from the experiment through simulation. Photographic sampling of 7 campus sites located in Kwanak campus of Seoul National University and slides of perspective drawings of enclosed spaces with various D/H ratio (12, 1, 2, 4, 6, 9, 12)were used for simulation. A response format was made using the method of paired comparison and students from various departments were randomly selected for evaluation. In the method of analysis of data Thurstone's equation of Comparative Judgement was used for calculating preference score. A1so non-linear regression analysis was used for finding out relations between preference and D/H ratio. The other method of data analysis were correlation, Chi - test. And the results were summarized as follows. 1. In sketch simulation the ratio of D/H 4 got the highest preference store. This result suggests that desirable D/H ratio of enclosed space is D/H 4. And at the lower range of D/H ratio, as ratio increases, the preference score increases. At the higher range of D/H ratio, however, as ratio increases, the preference score starts to decrease from the cardinal point of D/H 4. 2. In campus photograph simulation preference is influenced by slope, elevation change of floor, trees, lawn area, familiarity, space arrangement, and exterior shape of building besides D/H ratio. 3. The preference virtue was not significantly affected by order effect. This result suggests that order effect can be ignored in the study of visual preference. 4. There are so many factors related to preference that it is difficult to explore those factors without scientific information based on scientific method. We must carry out study for scientific approach of planning and design based on precise, complete simulation technique.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.277-282
• /
• 2006

With the aim of achieving half the regulated value of EURO-3 Emission Regulations, an ultra low emission motorcycle has been developed based on a motorcycle with an 1800 $cm^3$, horizontal opposed 6-cylinder engine. For the fuel supply system, an electronically controlled fuel injection system was applied. For the emission purification system, three-way catalysts, a feedback control system with a LAF(Linear Air-Fuel ratio) sensor, and a secondary air induction system were applied. To reduce CO and HC emissions during cold starting, an early catalyst activation method combining RACV(Rotary Air Control Valve) and retarded ignition timing was applied. After the catalyst activation, air-fuel ratio was controlled to maximize the purification ratio of the catalyst according to vehicle speed. For the air-fuel ratio control system, the LAF sensor was used. Furthermore, fine adjustment by the LAF feedback control reduced torque fluctuation due to the air-fuel ratio change. As a result, smooth ride feeling was maintained. Owing to these technologies, half the regulated value of EURO-3 has been achieved without any negative impact to the large-scaled motorcycles' drivability. This paper presents the developed ultra low emission technologies including the control method using an LAF sensor.

• 대한치과교정학회지
• /
• 제29권5호
• /
• pp.511-519
• /
• 1999

생역학적으로 우수한 스프링을 설계하기 위해서 스프링의 형태에 여러 가지 변화를 주면서 각 상황에서 force system이 변하는 양상을 수치분석계산과 spring tester를 이용한 실험과 비교하였다. 주어진 해부학적인 한계 내에서 최대한 생역학적 효율을 높이는 요소들을 제시하였다. 1. 스프링의 높이가 증가하면 M/F ratio는 증가하고 L/D rate은 감소한다. 2. 스프링의 최소 굽힘 모멘트 부위보다 위에 wire를 첨가하면 M/F ratio는 증가하고 L/D rate은 감소한다. 3. 스프링의 최소 굽힘 모멘트 부위보다 아래에 wire를 첨가하면 M/F ratio는 감소하고 L/D rate도 감소한다. 4. 스프링의 위쪽에 아무리 wire를 많이 첨가하여도 스프링의 높이 이상의 M/F ratio는 얻을 수 없다. 5. 제한된 높이의 스프링으로 충분한 M/F ratio를 얻기 위해서는 부가적인 모멘트가 필요하다. 6. 스프링의 수평 길이가 증가할 수록 M/F ratio와 L/D rate는 감소하므로 부가적인 모멘트는 점점 각도가 증가할 수 있도록 스프링 전체에 부여할 필요가 있다. 7. L/D rate는 재료, 단면, 그리고 형태에 영향을 받지만 M/F ratio는 재료나 단면에 관계없이 스프링의 형태에만 영향을 받는다.

• 한국산림과학회지
• /
• 제105권3호
• /
• pp.330-335
• /
• 2016

본 연구는 중부지방소나무 등 주요 5개 수종에 대하여 상업적으로 이용가능한 재적율인 조재율을 구하기 위하여 수행되었다. 본 연구에 이용한 자료는 최소 1,300여본 이상의 전국적인 조사자료를 이용하였으며, 적용한 추정식은 임목재적 중 목질부 재적을 나타내는 목질부 재적율 추정식과 목질부 재적에 대한 이용재적을 나타내는 원목이용율 추정식이었으며, 이 두가지 추정식의 곱으로 조재율을 도출하였다. 흉고직경에 의한 목질부 재적율(W)은 $W=\frac{a_1}{1+a_2/D}+\frac{b_1}{1+b_2/D}$의 모형을 이용하였으며, 이 식의 적합도는 수종별로 99% 이상이었고 기타 검정통계량도 식의 적합성을 충분히 설명하고 있었다. 목질부 재적에 대한 원목이용율(M)은 $M=e^{a_1\(\frac{d}{D}\)^{a_2}}-(b_0+b_1D+b_2D^2+b_3D^3)$ 모형을 적용시켜 적합도는 수종별로 96% 이상이었다. 이 두가지 추정식을 이용하여 5개 수종별로 상업적 재적이용율인 조재율을 산정하고 조재율표를 작성하였다. 분석결과, 조재율은 침엽수와 활엽수 임상별로는 거의 차이가 없는 것으로 나타났으나, 기존 침엽수, 활엽수 조재율과의 차이는 있는 것으로 나타났다.

• 한국주거학회논문집
• /
• 제24권6호
• /
• pp.61-68
• /
• 2013

According to the relation of the attribution of residents, we analyzed the spatial characteristics of newly-built Hanok in Bukchon focused on a spatial area-ratio, the number of rooms, L/D/K configuration. The results are as follows: 1) Have increased the number of residents, the family members are also increased. In this study, the major formed case is 3 residents and two-generation family. 2) In the most cases, R area-ratio is the highest, next to L/D/K integrated area-ratio. While the examples that the L/D/K integrated area-ratio is lower than R area-ratio, or is also higher than R area-ratio are appeared. These examples can present that it has a tendency to secure the necessary room depending on the attribution of residents. 3) L/D/K is classified into four types of connection. And the characteristics depending on the number of rooms are as follows. L+DK is the most common type, next to LDK>LD+K>L+D+K. And L+DK is widely distributed in each sized area. And particularly, it is appeared mostly in 3R.

• 생물정신의학
• /
• 제18권1호
• /
• pp.25-35
• /
• 2011

Objectives : Cerebral laterality is thought to be an important marker for neurodevelopment. Prenatal testosterone could influence both cerebral laterality and 2nd to 4th finger length ratio(2D : 4D). EEG coherence and 2D : 4D were examined to investigate the relationship between prenatal testosterone level and cerebral laterality. Methods : EEG was recorded in 24 healthy subjects in the eyes closed resting state. Differences in 2D : 4D finger ratio were used to discriminate "masculine finger type" and "feminine finger type" groups. The 2D : 4D ratio was lower and greater than one for the "masculine finger type" group and "feminine finger type" group, respectively. We used coherence analysis to estimate the cortical functional connectivity. Results : There were statistically meaningful relationships among cerebral functional connectivity, sex and finger ratio. Man and masculine finger type group showed higher intra-hemispheric coherence than those of woman and feminine finger type group. Woman and feminine finger type group showed higher inter-hemispheric coherence than those of man and masculine finger type group. Conclusions : These results imply that prenatal testosterone might act as important determinants of cerebral laterality. Further examination of the relationship between 2D : 4D and EEG coherence in schizophrenia could give some clues for the neurodevelopmental hypothesis of schizophrenia genesis.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.1133-1153
• /
• 2016

In this article, an additive performance ratio method using structural analysis of both 2D and 3D is introduced to mitigate the complexity of work evaluating structural performances of numerous steel outrigger alternatives in multi-story buildings, especially high-rise buildings. The combined structural analysis process enables to be the design of economic, safe, and as constructional demanding structures by exploiting the advantages of steel, namely: excellent energy dissipation and ductility. First the approach decides the alternative of numerous steel outriggers by a simple 2D analysis module and then the alternative is evaluated by 3D analysis module. Initial structural analyses of outrigger types are carried out through MIDAS Gen 2D modeling, approximately, and then the results appeal structural performance and lead to decide some alternative of outrigger types. ETABS 3D modeling is used with respect to realization and evaluation of exact structural behaviors. The approach reduces computational burden in compared to existing concepts such as full 3D analysis methods. The combined 2D and 3D tools are verified by cycle and displacement tests including comprehensive nonlinear dynamic simulations. The advantages and limitations of the Additive Performance Ratio Approach are highlighted in a case study on a high rise steel-composite building, which targets at designing the optimized alternative to the existing original outrigger for lateral load resisting system.

• 한국자기학회지
• /
• 제26권3호
• /
• pp.105-114
• /
• 2016

삼각 섬유성 연골(TFCC) 손상 환자의 평가를 위하여 fat suppressed 3D fast spoiled gradient recalled T1 기법과 fat suppressed Isotropic 3D fast spin echo T1 기법을 이용하여 영상을 획득하였다. 정량적 평가를 위해 각각의 영상에서 signal to noise ratio 및 contrast to noise ratio 값을 측정하고, Mann-Whitney U 검정으로 두 기법 간의 통계적 유의성을 검증하였다. 또한 정성적 평가를 위해 영상의학의 2명이 각각의 영상을 관찰하여, TFCC의 형태, 영상 내 인공음영, 병변의 묘사 정도의 3가지 항목을 선정한 후 이를 4점 척도(0: 진단 불가, 1: 부족함, 2: 충분함, 3: 좋음)로 평가하였고, Kappa-value 검정을 이용하여 두 관찰자 간의 일치도 검증을 하였다. 영상획득에는 3.0 Tesla MR 장비와 8-channel RF coil을 사용하였다. 정량적 평가 결과, 모든 영상 단면에서 signal to noise ratio 및 contrast to noise ratio 값이 Isotropic 3D fast spin echo T1 기법이 높게 나타났으며, Mann-Whitney U 검정을 이용한 두 영상기법 간의 검증도 통계적으로도 유의하였다(p < 0.05). 정성적 평가 결과, 관찰자 1, 2 모두에서 Isotropic 3D fast spin echo T1 기법의 평가 결과가 더 높게 나타났으며, Kappa-value 검증을 이용한 두 관찰자 간 평가 결과의 일치도 검증도 통계적으로 유의하였다(p < 0.05). 결론적으로 TFCC 손상 환자의 자기공명영상 검사 시 fat suppressed Isotropic 3D fast spin echo T1 기법의 적용은 TFCC 병변의 감별에 보다 유용한 진단적 정보를 제공 할 수 있을 것이라 생각된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1028-1029
• /
• 2006

We have developed a self-aligned single isolation structure (SIS) and an asymmetric single isolation structure with an image reversal photoresist to increase the aperture ratio in a passive matrix organic light emitting display (PMOLED). Compared to the conventional structure, the fabrication process is reduced by about 17% and the aperture ratio is enlarged over 4%.