• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.511-519
• /
• 1999

The shape of orthodontic retraction spring was varied and force system of each case was obtained using numerical analysis and verified with spring tester. The factors for obtaining biomechanically efficient spring under anatomic limitation were suggested as follows. 1. M/F ratio increases and L/D rate decreases as loop height increases. 2. M/F ratio increases and L/D rate decreases as incorporating more wire above minimum bending moment area. 3. M/F ratio decreases and L/D rate decrease as incorporating more wire below minimum bending moment area. 4. M/F ratio can not be greater than spring height no matter how much wire is incorporated at the apex of the loop. 5. Additional moment is necessary to obtain enough M/F ratio for translation under anatomical limitation. 6. Additional moment should be incorporated at every pah of the spring because M/F ratio and L/D rate decreases as horizontal spring length increases. 7. Material, cross section, and shape of the spring influence L/D rate, whereas M/F ratio is influenced by the shape of the spring independent from material and cross section.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.113-116
• /
• 2003

The investigation of delamination growth behavior in hybrid composite material such as FRMLs should be considered delamination growth rate, dA_D/da$ using the delamination shape factor, $f_S$ instead of traditional fracture mechanics parameters. The main objective of this study is to evaluate the relationship between delamination element (i. e. delamination width, b, delamination contour, c, delamination shape factor, $f_S$ and delamination growth rate, dA_D/da$) and delamination growth in FRMLs under cyclic bending moment. The delamination shape formed along the fatigue crack between aluminum layer and glass fiber/epoxy layer are measured by scanning method. The details of study are as follow : ⅰ) Relationship between crack length, a and delamination width, b. ⅱ) Variation of delamination growth rate, dA_D/da$ was attendant on delamination shape factors, $f_{S1}$, $f_{S2}$, $f_{S3}$. The test result indicated the delamination growth behavior depends in delamination element such as delamination width, b, delamination shape factors, $f_{S1}$, $f_{S2}$, $f_{S3}$.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.181-189
• /
• 1984

1,840 school children aged 6 to 13 years who live in inland area in CHOONG CHUNG BUK DO were surveyed epidemiologically on the dental caries prevalence. The results were as follows; 1. The prevalence of dental carries was 76.35 percentage in male, 76.15 percentage in female, and 76.25 percentage in both sexes. 2. d.m.f rate was 77.72 percentage in male, 80.07 percentage in female, and 78.86 percentage in both sexes. D.M.F rate was 30.73 percentage in male, 38.52 percentage in female, and 34.51 percentage in both sexes. 3. d.m.f.t. rate and index was 27.94 percentage,2.55T, and d.m.f.s. rate & index was 13.62 percentage, 6.22T. 4. D.M.F.T rate & index in permanent teeth was 4.86 percentage,0.72T, and D.M.F.S. rate & index was 1.20 percentage,0.89T. 5. The filling rate was 3.90 percentage in decidious teeth, 2,00 percentage in permanent teeth.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.49-55
• /
• 2013

To explore the paper materials for restoration of the Annals of the Joseon Dyansty, durability of the three type of the traditional Korean Papers were estimated in this study, through moist heat artificial aging test. Three types(D, F, and G) which showed the best preservation performance in dry heat and UV treatment in the previous study were selected and artificial accelerated aging treatment with moist-heat process was conducted; the viscosity change rate was D>G>F; folding endurance G>D>F; $L^*$ value F>D>G; $a^*$ and $b^*$ change rate D>G>F; brightness decrease rate D>G>F, suggesting paper F showed the least change rate in physical/optical properties. Also the CLSM image observation showed fair coherence among fibers and confirmed paper mulberry. And in FDI extraction from each sample, paper F showed the highest value. Overall, paper F (traditional glossy paper) showed the highest stability against thermal treatment. It confirms that paper F is suitable as restoration paper for tributary remains including the annals of the Joseon Dynasty for its steady strength/viscosity decrease rate and color change rate.

• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2015

The aim of the current study is to identify the dimerization and decomposition kinetics of the F-$D_M$ type. The regeneration of F-VS from $F_iF_j-D_M$ or the reversibility of the dimerizations were investigated. The order of real rate constants of the dimerization('$K_D{^{ij}}$) would seem to be similar to that of rate constants of a dimerization($K_D{^{ij}}$) for VS dyes at a given pH because of the constancy of the equilibrium constants($K_a{^j}$-value). The reverse reactions of the $D_M$ types are appeared to occur in two steps, the deprotonation of ${\alpha}$-carbon of the $D_M$ types and disproportionation. The ratio of the decomposition of the $D_M$ type to F-Hy and F-VS appears to be related with the ratio of $K_i/K_j$. Similarities were also found among various other reactions, including homo- and mixed dimerization. VS dyes undergoing fast hydrolysis have difficulty in forming a dimer. The higher the reactivity with cellulose or hydroxide ion, the smaller the dimerization. The easiness of the dimerization was thus found to be inversely proportional to the rate of hydrolysis.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.1932-1940
• /
• 2004

Although the previous researches evaluated the fatigue behavior of Al/GFRP laminates using the traditional fracture mechanism, their researches were not sufficient to do it : the damage zone of Al/GFRP laminates was occurred at the delamination zone instead of the crack-metallic damages. Thus, previous researches were not applicable to the fatigue behavior of Al/GFRP laminates. The major purpose of this study was to evaluate delamination behavior using the relationship between crack length (a) and delamination width (b) in Al/GFRP laminate. The details of investigation were as follows: 1) Relationship between the crack length (a) and the delamination width (b), 2) Relationship between the delamination aspect ratio (b/a) and the delamination area rate ((A$\_$D/)/subN// (A$\_$D/)$\_$All/), 3) The effect of delamination aspect ratio (b/a) on the delamination shape factor (f$\_$s/) and the delamination growth rate (dA$\_$D// da). As results, it was known that the delamination aspect ratio (b/a) was decreased and the delamination area rate ((A$\_$D/)$\_$N// (A$\_$D/)$\_$All/) was increased as the normalized crack size (a/W) was increased. And, the delamination shape factors (f$\_$s/) of the ellipse-II(f$\_$s3/) was greater than of the ellipse-I(f$\_$s2/) but that of the triangle (f$\_$s1/) was less than of the ellipse-I(f$\_$s2/).

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.398-404
• /
• 2003

Most previous researches for the hybrid composite materials such as FRMLs(Al/AFRP, Al/GFRP) have evaluated the fatigue delamination behavior using the traditional fracture mechanism. However, most previous researches have not generally been firmed yet. Because delamination growth behavior in hybrid composite should be consider delamination growth rate, $dA_D$/da using the delamination shape factors, fs instead of traditional fracture mechanic parameters. The major purpose of this study was to evaluate the relationship between delamination shape factor, fs and delamination growth rate, $dA_D$ . And a propose parameter on the delamination aspect ratio, b/a. The details of the study are as follow : 1) Relationship between crack length, a and delamination width,b. 2) Relationship between delamination aspect ration, b/a and delamination area rate,($(A_D)_{N}(A_D)_{ALL}$. 3) Variation of delamination growth rate, $dA_D/da$ was attendant on delamination shape factors, $fs_1$, $fs_2$, $fs_3$. The test results indicated the delamination growth rate depends on delamination shape factors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.1025-1030
• /
• 2001

As the pre-stage of making 3D stabilizing systems, at this paper designed 2D stabilizing system. This is composed of two axes stabilizing platform to preserve targeted direction while vehicle is moving. The system maintains stabilization by recovering error using the rate gyro with DSP TMS320F240 as controller, vibratory rate gyro (Tokimec co. TFG -l60D) as gyro scope, SD1015B52-1·SD1004C04-l/DM1015B DM1004C as direct drive driver/motor, PI control as control algorithm. This paper got a comparably good stabilization.

• The Journal of the Korean dental association
• /
• v.17 no.2 s.117
• /
• pp.141-145
• /
• 1979

The author, through oral examination, had surveyed the caries experienced teeth in 250 Korean mental Disorders(153 males and 97 fameles) who took it a rule consume a Vegetable diet and had litte chance to Consume refimed Corbohydrates, unlike the Common populars. DMF rate DMFT rate index DT rate MT rate and FT rate had been calculated and Compared with Common Popular's in same ages group. Following are the obtained results 1. In the mental Disorders, Caries experience rate was 52.19% 2. D.M.F. rate and index were lower in the females than in the males 3. The Caries experience rate in the mental Disorders was lower than in the Common Populars 4. In the mental Disorders the F.T. rate was higher in females than in males D.T. rate higher in males than in females and MT rate, lower in males than in females 5. In generally D.T. rate in the mental Disorders was lower than in Controls, M.T. rate resembled as Controls and F.T. rate higher

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.2
• /
• pp.317-326
• /
• 2003

The influence of cyclic bending moment on the delamination and the fatigue crack propagation behavior in Al/GFRP laminate such as the wing section was investigated. The main objective of this study was to evaluate the relationship between crack profile and delamination behavior. And a propose parameter on the delamination growth rate(d $A_{D}$/da) of Al/GFRP laminates with a saw-cut using relationship between delamination area( $A_{D}$) and cycles(N), crack length(a), stress intensity factor range($\Delta$K). Also, the fiber bridging effect factor( $F_{BE}$ ) was propose that the fiber bridging modification factor($\beta$$_{fb}$ ) to evaluate using the delamination growth rate(d $A_{D}$/da). The shape and size of the delamination zone formed along the fatigue crack between aluminum alloy sheet. Class fiber-adhesive layer were measured by an ultrasonic C-scan image. The shape of delamination zone turns out to be semi-elliptic with the contour decreased non-linearly toward the crack tip. It represents that relationship between crack length and delamination growth rate(d $A_{D}$/da) were interdependent by reciprocal action, therefore it's applicable present a model for the delamination growth rate(dA/sib D//da) in Al/GFRP laminates.minates.s.