• Asian-Australasian Journal of Animal Sciences
• /
• 제29권12호
• /
• pp.1796-1804
• /
• 2016

The high incidence of deaths during transport for slaughter is associated with poor welfare and represents a considerable loss to the poultry industry. In the period from 2009 to 2014, all shipments of broiler chickens to poultry processing plants were monitored in the Czech Republic and the numbers of chickens transported and those dying as a result of their transport were recorded and analysed. Overall transport-related mortality of broiler chickens transported for slaughter in the Czech Republic was 0.37%. It ranged from 0.31% to 0.72%, the increase approximately corresponding to the increasing transport distance. Statistically highly significant (p<0.001) differences were found when comparing transport-related mortality rates in individual seasons of the year. The greatest mortality (0.55%) was associated with transports carried out in winter months whereas the lowest death losses (0.30%) were found in chickens transported for slaughter in summer months. Our study revealed greater transport-related mortality rates in broiler chickens transported for slaughter in the Czech Republic than expected when considering earlier studies. The most pronounced increases were found in transports for shorter distances and in winter months. However, an increase was found at all transport distances monitored except for distances exceeding 300 km and all seasons except for summer. Furthermore, a general increasing tendency in chicken losses during the monitored period was found. The particularly alarming finding is that the mortality of broiler chickens being transported to processing plants has been showing a long-term increasing tendency over the last two decades. Further research should focus on the identification of specific factors leading to such high and growing mortality rates and developing practical guidelines to improve the welfare of the birds in transit accordingly.

• 국제지역연구
• /
• 제14권2호
• /
• pp.499-524
• /
• 2010

본 연구의 목적은 체제전환 국가들인 러시아, 체코, 폴란드의 중앙은행 독립성을 이론적 및 경험적 연구를 토대로 비교 및 평가하는 것이다. 중앙은행 독립성의 객관적 평가를 위해 인플레이션, 경제성장, 예산 적자와의 관계 및 독립성을 제한하는 정치 및 경제적인 요인을 함께 분석하였다. 일반적으로 중앙은행 독립성 확보는 시장경제의 성공적인 발전에 필수적인 조건으로 평가된다. 따라서 각국의 환율 변동, 인플레이션, 금융시스템에 대한 신뢰성 등 중앙은행의 독립성을 제한할 수 있는 금융 규제 문제를 함께 분석하는 것이 필요하다. 현재 중앙은행의 독립성 구축의 문제는 시장경제로 전환을 시도하고 있는 러시아, 체코, 폴란드에서 매우 중요한 문제이다. 이들 국가의 중앙은행들은 인플레이션 및 외환 시장 안정을 위해 물가안정목표제를 실시하고 있다. 또한 각국의 금융시스템의 지속 가능성을 향상시키기 위해 노력하고 있다. 즉 러시아, 체코, 폴란드의 중앙은행 독립성 확보는 시장경제의 완전한 정착 및 경제발전을 위한 궁극적인 목표라고 할 수 있다. 체코와 폴란드는 이미 EU 가입을 계기로 유럽 기준에 적합한 중앙은행 및 금융시스템을 구축하고 있다. 러시아의 경우도 중앙은행 기능 개선과 금융시스템을 개혁하는 과정에 있다. 그러나 현재는 서방과 같은 중앙은행 독립 모델을 사용하고 있음에도 불구하고, 여전히 법적, 경제적, 정치적 독립이 완벽히 실현되지는 못하고 있다. 그 이유는 중앙은행과 정부가 금융정책에 대해 종종 의견 차이를 보이고 있기 때문이다.

• 한국응용곤충학회:학술대회논문집
• /
• 한국응용곤충학회 2001년도 추계 합동 심포지엄 및 학술발표대회
• /
• pp.44-44
• /
• 2001

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권8호
• /
• pp.2590-2606
• /
• 2014

A problem related to deployment of femtocells is how to manage access of users to radio resources. On one hand, all resources of the femtocell can be reserved for users belonging to a closed subscriber group (CSG), which is a set of users defined by a femtocell subscriber. This approach, known as closed access, however, increases interference to users not included in the CSG as those users do not have a permission to access this femtocell. Contrary, resources can be shared by all users with no priority in an open access mode. In this case, the femtocell subscriber shares radio as well as backhaul resources with all other users. Thus, throughput and quality of service of the subscriber and the CSG users can be deteriorated. To satisfy both the CSG as well as non-CSG users, a hybrid access is seen as a compromise. In this paper, we propose a new approach for sharing radio resources among all users. As in common cases, the CSG users have a priority for usage of a part of resources while rest of the resources is shared by all users proportionally to their requirements. As the simulation results show, the proposed resource sharing scheme significantly improves throughput of the CSG users and their satisfaction with granted bitrates. At the same time, throughput and satisfaction of the non-CSG users is still guaranteed roughly at the same level as if conventional sharing schemes are applied.

• BMB Reports
• /
• 제40권3호
• /
• pp.404-411
• /
• 2007

Transformation of cantaloupes with the coat protein (cp) gene of papaya ringspot virus type W (PRSV-W), Thai isolate, was used to introduce virus resistance. Binary vectors containing either the full length coat protein coding region under control of the 35S CaMV promoter(pSA1175), or the inverted-repeat of a coat protein coding region (pSA1304), were constructed and used for Agrobacteriummediated transformation of cotyledonary explants of the cantaloupe cultivar Sun Lady. Four independent transgenic lines were obtained using pSA1304 and one using pSA1175. Integration of the PRSV-W cp gene into the genome of these transgenic lines was verified by PCR amplification, GUS assays and Southern blot hybridization. In vitro inoculation of these lines with PRSV-W revealed that whereas the line containing pSA1175 remained sensitive, the four lines containing pSA1304 were resistant. The presence of small RNA species, presumably siRNA, corresponding to regions of the viral cp gene in transgenic lines resistant to PRSV-W supports the involvement of post-transcriptional gene silencing in the establishment of resistance.

• Mycobiology
• /
• 제36권4호
• /
• pp.199-202
• /
• 2008

Inonotus obliquus is a fungus that causes white heart rot on several broad-leaved species. This fungus forms typical charcoal-black, sterile conks (chaga) or cinder conks on infected stems of the birche (Betula spp). The dark brown pulp of the sterile conk is formed by a pure mycelial mass of fungus. Chaga are a folk remedy in Russia, reflecting the circumboreal distribution of I. obliquus in boreal forest ecosystems on Betula spp. and in meridional mountain forests on beech (Fagus spp.) in Russia, Scandinavia, Central Europe, and Eastern Europe. Distribution at lower latitudes in Western and Southern Europe, Northern America, Asia, Japan, and Korea is rare. Infected trees grow for many years without several symptoms of decline. The infection can penetrate through stem injuries with exterior sterile conks developing later. In the Czech Republic, cinder conk is found on birches inhabiting peat bogs and in mountain areas with a colder and more humid climate, although it is widespread in other broad leaved species over the Czech Republic. The most common hosts are B. pendula, B. pubescens, B. carpatica, and F. sylvatica. Less frequent hosts include Acer campestre, Acer pseudoplatanus, Alnus glutinosa, Alnus incana, Fraxinus excelsior, Quercus cerris, Q. petraea, Q. robur, Q. delachampii, and Ulmus sp.

• Steel and Composite Structures
• /
• 제20권2호
• /
• pp.251-266
• /
• 2016

The paper combines two distinct parts. First the behavior of welded headed studs with small diameters of 10 and 13 mm acting as shear connectors (which are not embraced in current standards) is studied. Based on standard push tests the load-slip relationships and strengths are evaluated. While the current standard (Eurocode 4 and AISC) formulas used for such studs give reasonable but too conservative strengths, less conservative and full load-slip rigidities are evaluated and recommended for a subsequent investigation or design. In the second part of the paper the partially encased beams under bending are analyzed. Following former experiments showing rather indistinct role of studs used for shear connection in such beams their role is studied. Numerical model employing ANSYS software is presented and validated using former experimental data. Subsequent parametric studies investigate the longitudinal shear between steel and concrete parts of the beams with respect to friction at the steel and concrete interface and contribution of studs with small diameters required predominantly for assembly stages (concreting). Substantial influence of the friction and effect of concrete confinement was observed with rather less noticeable contribution of the studs. Distribution of the longitudinal shear and its sharing between friction and studs is presented with concluding remarks.

• Structural Engineering and Mechanics
• /
• 제33권4호
• /
• pp.429-446
• /
• 2009

Three-scale homogenization procedure is proposed in this paper to provide estimates of the effective thermal conductivities of porous carbon-carbon textile composites. On each scale - the level of fiber tow (micro-scale), the level of yarns (meso-scale) and the level of laminate (macro-scale) - a two step homogenization procedure based on the Mori-Tanaka averaging scheme is adopted. This involves evaluation of the effective properties first in the absence of pores. In the next step, an ellipsoidal pore is introduced into a new, generally orthotropic, matrix to make provision for the presence of crimp voids and transverse and delamination cracks resulting from the thermal transformation of a polymeric precursor into the carbon matrix. Other sources of imperfections also attributed to the manufacturing processes, including non-uniform texture of the reinforcements, are taken into consideration through the histograms of inclination angles measured along the fiber tow path together with a particular shape of the equivalent ellipsoidal inclusion proposed already in Sko ek (1998). The analysis shows that a reasonable agreement of the numerical predictions with experimental measurements can be achieved.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1251-1260
• /
• 2019

The water-cooled WCLL blanket is one of the possible candidates for the blanket of the fusion power reactors. The plasma-facing first wall manufactured from the reduced-activation ferritic-martensitic steel Eurofer97 will be cooled with water at a typical pressurized water reactor (PWR) conditions. According to new estimates, the first wall will be exposed to peak heat fluxes up to $7MW/m^2$ while the maximum operated temperature of Eurofer97 is set to $550^{\circ}C$. The performed analysis shows the capability of the designed flat first wall concept to remove heat flux without exceeding the maximum Eurofer97 operating temperature only up to $0.75MW/m^2$. Several heat transfer enhancement methods (turbulator promoters), structural modifications, and variations of parameters were analysed. The effects of particular modifications on the wall temperature were evaluated using thermo-hydraulic three-dimensional numerical simulation. The analysis shows the negligible effect of the turbulators. By the combination of the proposed modifications, the permitted heat flux was increased up to $1.69MW/m^2$ only. The results indicate the necessity of the re-evaluation of the existing first wall concepts.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권1호
• /
• pp.14-22
• /
• 2019

Objective: The aim of the study was to find a possible association between the ${\beta}-$ and ${\kappa}-casein$ and ${\beta}-lactoglobulin$ genotypes and important milk physiochemical and technological characteristics such as acidity, alcohol stability, the contents of some minerals and the parameters of acid fermentation ability (FEA) in Czech Fleckvieh Cattle. Methods: Milk and blood samples were collected from 338 primiparous Czech Fleckvieh cows at the same stage of lactation. The genotypes of individual cows for ${\kappa}-casein$ (alleles A, B, and E) and ${\beta}-lactoglobulin$ (alleles A and B) were ascertained by polymerase chain reaction-restriction fragment length polymorphism, while their ${\beta}-casein$ (alleles $A^1$, $A^2$, $A^3$, and B) genotype was determined using melting curve genotyping analysis. The data collected were i) milk traits including active acidity (pH), titratable acidity (TA), alcohol stability (AS); calcium (Ca), phosphorus (P), sodium (Na), magnesium (Mg), and potassium (K) contents; and ii) yoghurt traits including active acidity (Y-pH), titratable acidity (Y-TA), and the counts of both Lactobacilli and Streptococci in 1 mL of yoghurt. A linear model was assumed with fixed effects of herd, year, and season of calving, an effect of the age of the cow at first calving and effects of the casein and lactoglobulin genotypes of ${\beta}-CN$ (${\beta}-casein$, CSN2), ${\kappa}-CN$ (${\kappa}-casein$, CSN3), and ${\beta}-LG$ (${\beta}-lactoglobulin$, LGB), or the three-way interaction between those genes. Results: The genetic polymorphisms were related to the milk TA, AS, content of P and Ca, Y-pH and Lactobacilli number in the fresh yoghurt. The CSN3 genotype was significantly associated with milk AS (p<0.05). The effect of the composite CSN2-CSN3-LGB genotype on the investigated traits mostly reflected the effects of the individual genes. It significantly influenced TA (p<0.01), Y-pH (p<0.05) and the log of the Lactobacilli count (p<0.05). Conclusion: Our findings indicate that the yoghurt fermentation test together with milk proteins genotyping could contribute to milk quality control and highlight new perspectives in dairy cattle selection.