• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.242-242
• /
• 2010

산화 알루미늄($Al_2O_3$) 박막을 p-type Czochralski(CZ) Si 위에 Remote Plasma Atomic Layer Deposition(RPALD)을 이용하여 저온 공정으로 증착하였다. Photolithography 공정으로 grid 패턴을 형성한 후 열 증착기로 알루미늄을 증착하여 MIS-IL (Metal-Insulator-Semiconductor Inversion Layer) solar cell을 제작하였다. 반응소스로는 Trimethylaluminum (TMA)과 $O_2$를 이용하였다. $Al_2O_3$ 박막의 전기적 특성 평가를 위해 MIS capacitor를 제작하여 Capacitance-voltage (C-V), Current-voltage (I-V), Interface state density ($D_{it}$)를 평가하였으며 Solar simulator를 이용하여 MIS-IL Solar cell의 Efficiency을 측정하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.214-219
• /
• 2009

In high-efficiency crystalline silicon solar cells, If high-efficiency solar cells are to be commercialized. It is need to develop superior contact formation method and material that can be inexpensive and simple without degradation of the solar cells ability. For reason of plated metallic contact is not only high metallic purity but also inexpensive manufacture. It is available to apply mass production. Especially, Nickel, Copper and Silver are applied widely in various electronic manufactures as easily formation is available by plating. The metallic contact system of silicon solar cell must have several properties, such as low contact resistance, easy application and good adhesion. Ni is shown to be a suitable barrier to Cu diffusion as well as desirable contact metal to silicon. Nickel monosilicide(NiSi) has been suggested as a suitable silicide due to its lower resistivity, lower sintering temperature and lower layer stress than $TiSi_2$. Copper and Silver can be plated by electro & light-induced plating method. Light-induced plating makes use the photovoltaic effect of solar cell to deposite the metal on the front contact. The cell is immersed into the electrolytic plating bath and irradiated at the front side by light source, which leads to a current density in the front side grid. Electroless plated Ni/ Electro&light-induced plated Cu/ Light-induced plated Ag contact solar cells result in an energy conversion efficiency of 14.68 % on $0.2{\sim}0.6{\Omega}{\cdot}cm,\;20{\times}20mm^2$, CZ(Czochralski) wafer.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.16-21
• /
• 2010

It is well-known that Boron-doped Cz Si solar cells suffer light-induced degradation due to boron-oxygen defect which is responsible of a reduction in lifetime and hence efficiency. In this paper, we assume that PV solar cell has been connected with variable load to account the real operating condition and it shows different light-induced degradation of Si solar cell. To evaluate the effect of light-induced degradation for solar cell with various load, Single crystalline solar cells are connected with open and short circuits during light exposure. Isc-Voc curve evaluate light induced degradation of solar cells and the reason is explained as a change for serial resistance. From the results, Electrical characteristics of solar cells show better performance under short circuit conditions, after light exposure.

• Korean Journal of Materials Research
• /
• v.20 no.11
• /
• pp.617-622
• /
• 2010

We have studied methods to save Si source during the fabrication process of crystalline Si solar cells. One way is to use a thin silicon wafer substrate. As the thickness of the wafers is reduced, mechanical fractures of the substrate increase with the mechanical handling of the thin wafers. It is expected that the mechanical fractures lead to a dropping of yield in the solar cell process. In this study, the mechanical properties of 220-micrometer-solar grade Cz p-type monocrystalline Si wafers were investigated by varying saw-damage etching conditions in order to improve the flexural strength of ultra-thin monocrystalline Si solar cells. Potassium hydroxide (KOH) solution and tetramethyl ammonium hydroxide (TMAH) solution were used as etching solutions. Etching processes were operated with a varying of the ratio of KOH and TMAH solutions in different temperature conditions. After saw-damage etching, wafers were cleaned with a modified RCA cleaning method for ten minutes. Each sample was divided into 42 pieces using an automatic dicing saw machine. The surface morphologies were investigated by scanning electron microscopy and 3D optical microscopy. The thickness distribution was measured by micrometer. The strength distribution was measured with a 4-point-bending tester. As a result, TMAH solution at $90^{\circ}C$ showed the best performance for flexural strength.

• Journal of the Korean Society for Library and Information Science
• /
• v.28
• /
• pp.301-390
• /
• 1995

In this paper, I intended to study the policy executed by the king Sungjong(성종), the ruler of the early Chosun(조선) Dynasty, for the purpose of the training for the literary scholars under the diplomatic necessity and from his own interest in literature, and the compilation and the publication of anthologies of the famous civil officials in those days under the influence of this policy. The overall findings of the study can be summarized as follows : 1. Sungjong was comparable with the Sejong(세종) in his studiousness and especially, he was very interested in literature. He composed verses personally, showed them to his civil officials and demanded their poems in response to his own ones. Futhermore, he executed steadily the institutions of Eung-je(응제), Kaw-si(과식) and Weol-kwa(월과) that demanded creative writings from his civil officials. The purpose of these institutions which was propelled by the king Sungjong was the training for the literary scholars under the diplomatic necessity. 2. Chosun Dynasty exchanged envoys with Myeong(명) Dynasty during the time of the king Sungjong as many as 100 times. The training for the excellent literary scholars was nationally urgent problem because the competent literary scholars were needed whenever Myeong Dynasty dispatched the envoys to Chosun Dynasty. Eung-je, Kwa-si and Weol-kwa were executed from practical demand and 1 - 3 persons at the minimum, 60 - 70 persons at the maximum took part in this institution at a time. This means that 60 - 70 literary works were produced at a time. Therefore, the steady execution of Eung-je, Kwa-si and Weol-kwa inevitably resulted in mass production of literary works. 3. The king Sungjong instructed his civil officials to compile the anthologies of the then representative civil officials as a means to encourage literary compositions, read it himself and took actions to publish them at the expense of government. There were six anthologies compiled and published under this policy of the king Sungjong, Kang Heui­maeng's Sasukjejib(강희맹, 사숙제집), Shin Suk-ju's Bohanjaejib(신숙단, 보한제집), Kim Su-on's Shikujib (김수온, 식우집), Choe Hang's Taeheojeongjib(최항, 태허정집), Seo Keo-jeong's Sagajib (서거정, 사가집), Lee Seok-hyeong's Jeoheonjib(이석형, 저헌집). Yu Ho-in's Noekyejib(유호인, 뇌계집+CZ48), Lee Seung-so's Samtanjib(이승소, 삼탄집), Kim Jong-jik's Jeompiljaejib(김종직, 점필제집) of three were examined by the king Sungjong, but published later because of the death of the king. 4. jeompiljaejib was compiled by order of the king Sungjong and passed Eulram (을람 : king reads an anthology personally) which contained Joeuijemoon(조의제문) that criticized the king Sejo(세조) who had usurped a throne. The recording of Joeuijemoon became an issue in process of Muosahwa(무오사화), and it was ordered that the printing blocks should be broken and the published books should be collected and be burnt up. These procedures destroyed the social atmosphere that people considered it an honor writing literary compositions, compiling and publishing anthologies thanks to the steady efforts of the king Sungjong. 5. It had an important effect on the compilation and the publication of anthologies after that, breaking the printing blocks, collecting and burning up the pulished books of Jeompiljaejib because of recording of Joeuijemoon. Namely, it got universalized to delete compositions that can cause problems in the future as well as the parts related to political issue, from the objects of recording. Such tendency became one of the important principles of the anthological compilation after that.