• Archives of Pharmacal Research
• /
• 제16권2호
• /
• pp.134-139
• /
• 1993

The molecular structure of acemetacin, 1-(4-chlorobenzoyl)-5-methoxy-2-methyl-1H-indole-3-acetic acid carboxymethyl ester, was determined by single cystal X-ray diffraction analysis. The compound was recrystallized from a mixture of acetone and water in triclinic, space group P1, with a=7.796(1), b=10.245(2), c=13.542(3)$\AA,\;\alpha=97.35(1),\;\beta=96.34(1),\;\gamma=107.06(1)^\circ$, and Z=2. The calculated density is 1.422; the observed value is $1.42\;g/cm^3$. The structure was solved by the direct method and refined by full matrix least-squares procedure to the final R value of 0,037 for 2960 independent reflections. There are water molecules, which are thought to be co-crystallized during the evaporation procedure, with the ratio of one water per compound molecule in the crystal. The conformation of the compound is found to be very similar to that of indomethacin. The molecules are stabilized by three O-H.....O type intermolecular hydrogen bonds between the oxygen of water molecule and those of the compound.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.440-441
• /
• 2006

We have studied the narrow viewing angle liquie crystal displays (LCDs) using a hybrid aligned nematic liquid crystal (LC) cell driven by a fringe field. The device using a LC with positive dielectric anisotropy has a relatively low transmittance. This paper describes how to improve light efficiency by optimizing electrode structure. The results show that the device exhibits a high transmittance of 90%, low driving voltage and narrow viewing angle less than $20^{\circ}$ along horizontal direction which is highly effective for private display application.

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1178-1188
• /
• 1995

Bi4Ti3O12 (BIT) and its rare earth (Y, Nd, Sm, Gd)-substituted derivatives were synthesized using a sol-gel method to investigate their microstructures, cystal structures and electrical properties depending on the subsituted elemetns. Nd- or Sm-substitution into BIT appeared to be favorable, while Y- or Gd-substitution occurred with a pyrochlore phase. This suggests that a smaller trivalent rare earth ion may not be favorable in the structure of BIT. The rare earth derivatives showed that their particle sizes and shapes were considerably different depending on the kinds of substituted elements. Y-substitution resulted in developing a relatively even particle size and a dense microstructure. In structure, they may be similar to the pseudo-orthorhombic BIT but close to a paraelectric tetragonal phase. Their a (or b) axes were shortened, compared to the one of BIT. Such a distortion may result a decrease in the tilting of TiO6. BIT and the derivatives showed that their dielectric constants and losses were 40~120 and less than 0.03, respectively in the frequency range of 1~10 MHz. The dielectric loss of Y-substituted derivative was the lowest one and changed a little to frequency. Curie points were observed in all the derivatives like BIT to suggest that they would be ferroelectric. The temperature stability of the delectric properties of the derivatives below the Curie points were relatively better than the one of BIT.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.747-753
• /
• 2004

In this paper, nanocrystalline indium tin oxide (ITO) particles were fabricated by using synthesis without harmful elements. The synthetic method is to eliminate the chloridic and nitridic elements which are included in the current wet type synthetic method. Therefore, it is possible to lower synthetic temperature below 600 $^{\circ}C$ to eliminate the harmful elements. Accordingly, fine particle can be achieved by applying the process. Particle size, surface area, crystal structure, and composition ratio of the synthesized nanocrystalline ITO particle by using the method were analyzed with high resolution transmission electron microscopy (HRTEM), BET surface area analyzer, X-ray diffraction (XRD), and energy dispersion spectroscopy (EDS). As a result, its particle size is less than 10 nm, and the surface area exceeds 100 m$^2$/g. The XRD analysis indicates that the cystal structure of the powder is cubic one with orientation of <222>, <400>, <440>. Also, the analysis of the composition demonstrates that the around 8 wt% tin is uniformly included in In$_2$O$_3$ lattice of the nanoparticle.

• 한국항해항만학회지
• /
• 제26권1호
• /
• pp.120-126
• /
• 2002

ZnS 박막을 Hot W긴 법에 의해 증발관 온도, 기판온도 및 외부로부터 유황(5)의 공급을 변수로 하여 제작하여 광학적, 결정 구조적 특성을 분석 ·검토하였다 박막의 증착속도는 증발관 온도 및 5 증기압을 높일수록 증가하였으나 기관온도를 높이면 급격히 감소하였다. 박막의 광학적 특성은 증착속도와 밀접하게 관계하고 있다고 사료되며, 실온에서의 금지대 폭은 이론 값보다 작은 3.46∼3.72ev를 나타내어 결정 중에 결함이 존재함을 알 수 있었다. 박막의 구조를 분석한 결과 어느 경우에 있어서나 섬아연광 구조의 (111) 주 배향성을 나타내었으나 회절피크의 강도 및 반치폭으로부터 결정성은 대체로 양호하지 못했음을 알았다. 그러나, 기판온도 또는 5 공급 등의 제작조건에 따라 광학적, 결정적 특성이 개선되었다.