• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.584.1-584
• /
• 2001

The purpose of this study was to evaluate the effects of various cavity configuration on bond strength and micro leakage of composite restoration. The specimens were prepared as followed; For control group(C=1), bovine teeth were wet-ground to expose flat dentin surface and in experimental groups, cylindrical cavities, same all2mm deep and 6mm in diameter(C=2.3), 4mm(C=3.0), and 3mm(C=3.7) were prepared.(omitted)

• Smart Structures and Systems
• /
• 제28권6호
• /
• pp.839-853
• /
• 2021

In this paper, a novel multimode liquid metal-based pressure sensor is developed. The main body of the sensor is composed of polydimethylsiloxane (PDMS) elastomer. The structure of the sensor looks like a sandwich, in which the upper structure contains a cylindrical cavity, and the bottom structure contains a spiral microchannel, and the middle partition layer separates the upper and the bottom structures. Then, the liquid metal is injected into the top cavity and the bottom microchannel. Based on linear elastic fracture mechanics, the deformation of the microchannel cross-section is theoretically analyzed. The changes of resistance, capacitance, and inductance of the microchannel under pressure are deduced, and the corresponding theoretical models are established. The theoretical values of the pressure sensor are in good agreement with experimental data, implying that the developed theoretical model can explain the performance of the sensor well.

• 한국음향학회지
• /
• 제19권2호
• /
• pp.8-12
• /
• 2000

본 논문은 주위 환경인 수압 및 수온변화에 따른 맨드릴형 광-음향센서의 감도특성을 분석한 것에 관한 것이다. 음향감지부의 구조로는 실린더형, 중공 층상복합체형 및 air cavity가 삽입된 중공 층상복합체를 선정하고, 주위 수압과 수온변화에 따른 광-음향센서의 감도특성을 분석하였다. 맨드릴형 광-음향센서는 주위 정수압의 변화에 대해 0.15dB 미만의 음향감도 변화를 나타내고, 수압변화에 대해 안정적인 특성을 보유하고 있다. 주위 수온변화에 대한 음향감도의 상대적인 안정성은 air cavity가 삽입된 중공 나일론 층상복합체를 이용한 맨드릴형 광-음향센서가 가장 우수한 것으로 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.437-442
• /
• 1997

An experimental study was carried out in a channel cavity with square heat surface by visual¬ization equipment with Mach - Zehnder interferometer and laser apparatus. The image processing system consists of one commercial image board slit into a personal computer and 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system which adopted two¬frame grey-level cross correlation algorithm. Heat source was uniform heat flux(o.4W/cm$^2$, , O.8W/cm$^2$, 1.2W/cm$^2$). Obtained result showed various flow patterns such as kinetic energy distribution. Severe unsteady flow fluctuation within the cavity are remarkable and sheared mixing layer phenomena are also found at the region where inlet flow is collided with the counter-clockwise rotating main primary vortex. Photographs of Mach ~ Zehnder are also compared in terms of constant heat flux.

• Journal of Radiation Protection and Research
• /
• 제26권3호
• /
• pp.271-273
• /
• 2001

In precise measurement of air kerma with cavity ionization chambers, the effect of wall attenuation and scatter are corrected by Kwall and that of nonuniformity by Knu. Using the EGS4 code, we calculated these two correction factors. Correction factors calculated for two different-sized cylindrical ionization chamber differ by up to 0.7% from those obtained by measurements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.300-303
• /
• 1987

A microwave plasma generating system has been designed to study the properties of plasma. A microwave(2.45GHz) generated by the magnetron is transmitted to the cylindrical cavity through the the rectangular wave guide to generate hydrogen plasma. The electron temperature and the plasma density are measured by the Double Langmuir probe. A dilectric such as alumina is heated by the microwave add plasma. The surface temperature varies with the neutral gas pressure.

• 대한전자공학회논문지TC
• /
• 제38권7호
• /
• pp.14-21
• /
• 2001

본 논문에서는 유전체가 삽입된 공진기를 이용하여 C-band용 대역통과 여파기를 설계, 제작하였다. 공진기의 높이는 인접 유전체 공진기의 도파관 차단 주파수로부터 결정된다. 공진기의 지름은 도체 손실을 고려하여 유전체의 두 배로 결정하였다. 유전체 공진기의 공진주파수는 비소멸(non-decaying) 모드 해석법으로 계산하였다. 일반적으로 원통형 유전체 공진기의 공진주파수는 Cohn 모델로 해석하였는데, 이것은 공진기의 벽과 유전체벽 사이에서 전자파가 소멸(decaying)된다는 가정 하에 해석한 방법이다. 그러나， 이 방법은 근사적인 해석방법이다. 외부양호도(external quality factor)인 $Q_{ex}$는 Ansoft의 Maxwell 시뮬레이션 툴을 사용하여 결정하였다. 유전율 45인 유전체를 사용하여 설계한 대역통과 여파기는 5.065GHz의 중심주파수를 가졌다. 삽입손실은 1dB, 밴드 폭은 20MHz, 감쇠 특성은 30dB$(f_0{\pm}15MHz)$)로 설계목표에 만족함을 알 수 있다.

• 한국전자파학회지:전자파기술
• /
• 제5권2호
• /
• pp.46-54
• /
• 1994

본 논문에서는 원통변에 표면-정합된 마이크로스트럽 배열 안태나의 지향특성을 개선하기 위한 방볍을 제 시한다. 장방형 마이크로스트립 패치를 원통변에 횡방향으로 호(arc) 모양 배열하는 경우, 원통면윤 다각형의 각주로 끈사하고, 각각의 각주 평변에 임의 방향으로 주빔의 sqwnt를 가지는 Dolph - Tschebyscheff 배열, u uniform 배열 등의 부배열(sub-array)을 배치하므로써 전체 원통면 배열 안테나에 원하는 지향특성을 가지도 록 할 수 있음을 보이고, 원통면-공진기 모텔을 이용하여 복사패턴을 해석한다. 부배열의 종류에 따른 전체 배 열 얀테나의 복사패턴을 비교하고, 배열간격이 $\lambda_0$/2인 uniform 배열을 이용한 요소수 12인 원통면 배열 안테 나를 제작하여 반경이 6인 원통변에 정합시켰을 때 부엽 level -l3dB, 반전력범폭 $9^{\circ}$, 제일 null 사이각 $15^{\circ}$인 양호한 특성을 얻어 선형배열을 이용하는 경우보다 지향특성을 현저하게 개선시켰다

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3491-3496
• /
• 2007

If a molten core is released from a reactor vessel into a reactor cavity during a severe accident, an important safety issue of coolability of the molten core from top-flooding and concrete ablation due to a molten core concrete interaction (MCCI) is still unresolved. The released molten core debris would attack the concrete wall and basemat of the reactor cavity, which will lead to inevitable concrete decompositions and possible radiological releases. In a OECD/MCCI project scheduled for 4 years from 2002. 1 to 2005. 12, a series of tests were performed to secure the data for cooling the molten core spread out at the reactor cavity and for the 2-D long-term core concrete interaction (CCI). The tests included not only separate effect tests such as a melt eruption, water ingression, and crust failure tests with a prototypic material but also 2-D CCI tests with a prototypic material under dry and flooded cavity conditions. The paper deals with the transient simulations on the CCI-2 test by using a severe accident analysis code, CORQUENCH, which was developed at Argonne National Laboratory (ANL). Similar simulations had been already per for me d by using MELCOR 1.8.5 code. Unlike the MELCOR 1.8.5, the CORQUENCH includes a melt eruption mode I and a newly developed water ingression model based on the water ingression tests under the OECD/MCCI project. In order to adjust the geometrical differences between the CCI-2 test (rectangular geometry) and the simulations (cylindrical geometry), the same scaling methodology as used in the MELCOR simulation was applied. For the direct comparison of the simulation results, the same inputs for the MELCOR simulation were used. The simulation results were compared with the previous results by using MELCOR 1.8.5.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.456-462
• /
• 2001

Comprehensive numerical computations are made of a homogenous spin-up in a cylindrical cavity with a time-dependent rotation rate. Numerical solutions are acquired to the governing axisymmetric cylindrical Navier-Stokes equation. A rotation rate formula is ${\Omega}_f={\Omega}_i+{\Delta}{\Omega}(1-{\exp}(-t/t_c))$. If $t_c$ is large, it implies that a rotation change rate is small. The Ekman number, E, is set to $10^{-4}$ and the aspect ratio, R/H, fixed to I. For a linear spin-up(${\epsilon}<<$), the major contributor to spin-up in the interior is not viscous-diffusion term but inviscid term, especially Coriolis term, though $t_c$ is very large. The viscous-diffusion term only works near sidewall. But for spin-up from rest, when $t_c$ is very large, viscous-diffusion term affects interior area as well as sidewall, initially. So azimuthal velocity of interior for large $t_c$ appears faster than that of interior for relatively small $t_c$. However, the viscous-diffusion term of interior decreases as time increases. Instead, inviscid term appears in the interior.