This study examines the process of the introduction of stupa, which has originated in India, to the Xinjiang Uyghur region and the features of the stupas in the Xinjiang Uyghur region in detail. This study examines the layout of the buildings in temple compounds and the types, structural elements, and construction methods of the stupas in the Xinjiang Uyghur region in particular by looking into the content of the Da Tang Xi Yu Ji and remaining stupas, which provide examples of stupas at the time. This study finds that due to the characteristics of dry deserts, stupas in Xinjiang Uyghur region, where assimilation between Eastern and Western cultures is seen, were mostly made by pressing clay into a mold and had no interior spaces. Also, construction materials and techniques had been developed and improved in a way that enabled stupas to combat the challenging desert conditions. However, the stupas in this region differed significantly from the wooden tower-like stupas discovered in central China(zhongyuan 中原). The shape of the dome of most stupas in Xinjiang Uyghur region was chosen under the influence of the Gandharan style. Some of the stupas in the region have taken the general forms of the wooden stupas and the others have taken many forms, from cylindrical drums to towers. Also, there have been forests of stupas and stupas similar in form to chaityas and stupas of Vajrayana. Such different forms were transformed and modified through regional history and it was related to the peoples and cultures that produced and used stupas. Stupas evolved into distinct forms in Xinjiang Uyghur region in this way.
AH-26 근관실러가 상아질에 대한 복합레진의 전단결합강도에 미치는 영향을 평가하기 위하여 144개의 발거된 대구치를 실린더형의 몰드에 매식한 다음 치관부의 상아질 표면을 노출시킨 후 편평하게 연마하고 AH-26을 도포한 군, ZOE paste를 도포한 군 및 실러를 도포하지 않은 대조군으로 나누어 One-step 상아질 접착제를 처리한 후에 Charisma (Heraeus Kulzer Germany) 복합레진을 적용하고 광중합시켰다. 시편을 분리하여 $37^{\circ}C$ 항온조에 24시간 보관후 Instron test machine (Model 4202, Instron Corp. USA)을 이용하여 시편의 전단 결합 강도를 측정하고 one-way ANOVA 및 Tukey's studentized rank test로 통계 분석 하였다. AH-26 근관실러로 처리한 군과 대조군은 ZOE 근관실러 처리군에 비해 유의하게 놓은 접착강도를 나타내었다(p<0.05). AH-26 근관실러 처리군과 아무 처리하지 않은 대조군 사이에는 결합강도에 있어 유의한 차이를 나타내지 않았다 (p>0.05). 본 연구의 조건에서는 ZOE 근관실러는 상아질에 대한 복합레진의 전단결합강도를 저하시키는 반면 AH-26 근관실러는 유의한 영향을 미치지는 않는 것으로 보인다. 따라서 임상에서 근관실러로 AH-26을 사용한 근관충전 후에는 즉시 복합레진 코어를 해 주어도 결합력에 저해가 없을 것으로 여겨진다.
The purpose of this study was to investigate whether the ashed tooth powder is utilized as an alternative material of the implant to recovery the bony defect. For this purpose its biocompatibility was evaluated comparing to the synthetic calcium phosphate compounds, such as Syntograft and Calcitite, as well as the vacuum firing porcelain (Ceramco Inc.) which is anticipated to use as a matrix to aid sintering. Bony defects to exposure the bone marrow, $3{\times}5$ mm in size, were created in the right and left tibias of fifteen rabbits, and then the ashed tooth powder at $950^{\circ}C$, the porcelain powder, Syhtograft and Calcitite were inserted in the defects of twelve rabbits of the experimental group and the blood clot only was filled in the defects of three rabbits of the control group. The experimental and control rabbits were sacrificed at 1st, 2nd 3rd week after implantation and the histologic examination was performed. The ashed tooth powder in order to make the needed form of the implant was molded using the cylindrical mold 1 cm high, 1 cm in diameter under the pressure of $1000kg/cm^2$ and the ashed tooth powder was sintered at $1100^{\circ}C$ for 1 hour and the mixture of the porcelain powder and the ashed tooth powder at the weight ratio of 7:3, 6:4, 5:5, 4:6 were molded in the same manner and were sintered at $925^{\circ}C$. From this sintered material, square shaped implants were prepared in the dimension of $2{\times}4{\times}6mm$. The prepared implants were surgically placed in the subperiosteum of lateral surfaces of the right and left mandibular bodies. The dogs were sacrificed at 4 weeks, and then the specimens were examined using the light and scanning electron microscopes. The results of this study were obtained as follows: 1. Any inflammatory response was not noted after implanting of the ashed tooth powder, Syntograft, Calcitite and the porcelain powder during the whole experimental period after implantation. 2. Induction of the new bone formation was significantly shown in the ashed tooth powder, Syntograft and Calcitite. 3. The more the porcelain powder was contained in the implants, the more the porosity was and the bigger the pore size was under the scanning electron microscope. And there was ingrowing of the fibrous connective and the osteoid tissue. 4. The osteoid tissues were found to be directly fused to the implant of the ashed tooth powder, and the mixture implant of the porcelain powder and the ashed tooth powder at the weight ratio of 4:6 under the light and scanning electron microscopes.
The purpose of this study was to evaluate the color changes of the composite resin resulting from xenon lamp exposure in different environments. Composite resin (Z 250 ; shade Al, A2, A3, A3.5, and A4) were applied in a cylindrical metal mold. Seventy five specimens according to environments of exposure were made as follows; Group I aluminum foiling of the specimens in the air at $37^{\circ}C$ for 1 day and 7 days. Group II : exposure of xenon lamp to the specimens in the air at $37^{\circ}C$ for 1 day and 7 days. Group III: exposure of xenon lamp to the specimens in distilled water at $37^{\circ}C$ for 1 day and 7 days. The color characteristics ($L^{*},a^{*},b^{*}$) of the specimens before and after exposure of xenon lamp were measured by spectrophotometer and the total color differences (${\Delta}E^{*}$) were computed. The results obtained were as follows : 1. In all groups except A1 shade of group III, the ${\Delta}E^{*}$ values presented below 2.0, and group III showed the highest ${\Delta}E^{*}$ values followed by group II and group I in a decreasing order(p<0.05). 2 In all shades and groups, the more the exposure time of xenon lamp and the lighter the shade were, the higher the tendency for discoloration (p<0.05). 3. The composite resins which was exposed to xenon lamp in the distilled water was more discolored than those in the air (p<0.05). 4. The major changes of composite resins which were exposed to xenon lamp in the air were an increase in yellowness through a positive shift of the $b^{*}$ value, and those in the distilled water were an increase in darkness and yellowness through a negative shift of the $L^{*}$ value and a positive shift of the $b^{*}$ value.
자동서랍함용 완충기는 서랍을 여닫을 때 충격을 흡수하고 속도를 조절하는 역할을 해 준다. 완충기 튜브는 완충기의 구성품을 에워 쌓고 있는 원통 모양의 케이스이며 아세탈 재질로 되어있다. 본 연구는 사출 성형 공정에서 제작된 완충기 튜브의 품질 안정성을 평가하는 데 목적이 있다. 완충기 튜브는 4 캐비티 냉각장치를 갖춘 사출 성형공정에서 제작된다. 본 연구에서는 완충기 튜브의 품질 안정을 판단하기 위해 분석과 시험이 수행되었다. 분석과 시험은 컴퓨터 시뮬레이션을 통한 품질 분석과 연구된 튜브에 대한 외산품과의 성능 비교 시험이다. 사출 압력은 87.6 MPa로, 전체 휨량은 0.07~1.0 mm로 계산하였다. 연구된 튜브와 외산품을 비교해 볼 때 튜브의 최대 압축-하중은 231 kgf, 구간별 변위-하중은 0.05 kgf, 그리고 또 튜브 내경의 표면거칠기(Ra)는 $0.02\;{\mu}m$ 향상되었다. 결과적으로 사출 성형 공정에서 제작되어지는 연구된 튜브의 품질은 안정되었고 성능이 우수함을 알 수 있었다.
The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.
근관충전재로 사용되는 gutta-percha의 대체재로서 Resilon이라는 bioactive glass와 약간의 방사선 불투과성 성분을 포함하는 열가소성 고분자가 최근 소개되었다. 본 연구에서는 열연화 주입식 gutta-percha와 Resilon의 열팽창 특성을 측정하고 상호 비교하였다. 실험재료 중 gutta-percha 군으로는 Obtura, Diadent 그리고 Metadent사의 gutta-percha를, Resilon으로 Pentron사의 Epiphany를 사용하였다. 열가압주입기인 Obtura II에 4가지 재료를 넣고 설정온도를 $100^{\circ}C$, $150^{\circ}C$, $180^{\circ}C$ 그리고 $200^{\circ}C$로 바꾸어 가며 각 온도에 대해서, heat-ing chamber 입구에서의 온도와 23 게이지와 20 게이지의 needle에서 사출되는 재료의 온도를 디지털 thermometer를 이용하여 측정하였다. 열팽창을 측정하기 위해 세라믹으로 내경 3 mm, 외경 10 mm. 길이 27 mm의 원통형 주형을 제작하였고, 주형 안에 각 재료를 채워 넣은 후 양끝을 세라믹 공이 (plunger)로 막았다. 이 시편을 dilatometer에 넣고 가열하여 $25^{\circ}C$에서 $75^{\circ}C$까지의 범위에서 열팽창 곡선을 얻었다. 온도에 따른 시편의 길이 변화로부터 각 재료의 열팽창 계수와 전체부피에 대한 팽창량을 계산하였다. 모든 재료에서 온도가 증가함에 따라 $45^{\circ}C$ 이하에서는 재료의 부피변화가 거의 없었고, $45^{\circ}C$에서 $55^{\circ}C$ 구간에서 급격히 팽창하였으며 그 이상의 온도에서는 완만한 부피의 증가를 보였다. $35^{\circ}C$에서 $55^{\circ}C$ 사이에서의 부피의 변화는 재료들 사이에 통계적으로 유의한 차이가 없었으며 (p > 0.05). $35^{\circ}C$에서 $75^{\circ}C$사이의 부피의 변화는 Obtura 사 gutta-percha가 Metadent사와 Diadent사의 gutta-percha에 비해 유의하게 작은 것으로 나타났다 (p <0.05). Epiphany는 gutta-percha 군들과 비슷한 열팽창을 보였다 (p > 0.05).
This study was to know the usefulness of argon laser for composite resin, to prove the polymerized effect of heat treatment of composite resin inlay and to get the curing method for optimal physical properties of composite resin inlay. In this study we used four light curing units and one heat curing unit: Visilux $II^{TM}$, a visible light gun: $SPECTRUM^{TM}$, an argon laser: Unilux AC$^{(R)}$ and Astorn XL$^{(R)}$, visible light curing unit: CRC-$100^{TM}$ for heat treatment. Compared to a control group, we divided the experemental groups into five as follows: Control group: Light curing(Visilux $II^{TM}$) Experimental group 1 : Light curing(Visilux $II^{TM}$) + Light curing(Unilux AC$^{(R)}$) Experimental group 2: Light curing(Visilux $II^{TM}$) + Light curing(Astron XL$^{(R)}$) + Heat treatment(CRC-$100^{TM}$) Experimental group 3 : Laser curing($SPECTRUM^{TM}$) Experimental group 4 : Laser curing($SPECTRUM^{TM}$) + Light curing(Unilux AC$^{(R)}$) Experimental group 5 : Laser curing($SPECTRUM^{TM}$) + Light curing(Astron XL$^{(R)}$) + Heat treatment (CRC-$100^{TM}$) According to the above classification, we made samples through the curing of Clearfil CR Inlay$^{(R)}$, which is a composite resin for inlay, in a separable cylindrical metal mold and polycarbonate plate. And then, we measured and compared the value of compressive strength, diametral tensile strength and the surface micro hardness of each sample. The results were as follows : 1. Among the experimental groups, group 5 showed the highest value of compressive strength, $157.50{\pm}10.24$ kgf and control group showed the lowest value of compressive strength, $103.93{\pm}21.93$ kgf. Control group showed significant difference with the experimental groups(p<0.001). Group 2 which was treated by the heat showed higher compressive strength than that of group 1 which was not, and there was significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was significant difference group 4 and group 5(p<0.001). 2. Among the experimental groups, group 5 showed the highest value of diametral tensile strength, $95.84{\pm}1.97$ kgf and control group showed the lowest value of diametral tensile strength, $81.80{\pm}2.17$ kgf. Control group which was cured by visible light showed higher diametral tensile strength than group 3 which was cured Argon Laser. Group 2 which was treated by heat showed higher compressive strength than that of group 1 which was not, and there was significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was a significant difference group 4 and group 5(p<0.001). 3. Among the experimental groups, group 5 showed the highest value of microhardness of top surface, $148.42{\pm}9.57$ kgf and control group showed the lowest value of microhardness, $111.43{\pm}7.63$ kgf. In the case of bottom surface, group 5 showed the highest value of $146.19{\pm}7.62$ kgf, and control group showed the lowest, $104.03{\pm}11.05$ kgf. Group 3 which was cured by Argon Laser showed higher diametral tensile strength than control group which was cured only with a visible light gun. Group 2 which was treated by heat showed higher compressive strength than that of group 1 which was not, and there was a significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was a significant difference group 4 and group 5(p<0.001). 4. According to the above results, we took a conclusion that argon laser can be used as a useful unit for curing the composite resin and heat treatment can improve the physical properties of the composite resin inlay.
연구 목적: 미세 인장결합강도 측정을 위한 시편 제작 시 발생하는 스트레스가 결합강도에 어떠한 영향을 미치는 지를 알아보고자 하였다. 연구 재료 및 방법: 원통 모양의 지르코니아 블럭을 다이아몬드 디스크를 이용해 디스크 형태로 자른 후 소결하였다. 소결된 지르코니아 디스크에 소성시 수축을 고려한 적당한 크기의 틀을 제작하여 LAVA ceram (3M ESPE, Seefeld, Germany) 도재를 축성한 후 소성하였다. 먼저 그룹 1은 디스크 모양의 시편을 충분히 물을 뿌려가며 다이아몬드 디스크를 이용하여 $1{\times}1{\times}7\;mm^3$의 막대기 모양으로 저속에서 절단하였다 (n = 15). 그룹 2는 같은 방법으로 $1.2{\times}1.2{\times}7\;mm^3$로 자른 후 두꺼운 다이아몬드 디스크를 이용해 $1{\times}1{\times}7\;mm^3$로 트리밍하였다 (n = 15). 그 후 특별히 제작된 지그에 각각의 시편을 core-veneer의 접착면이 오염되지 않도록 조심히 접착한 후 미세 인장결합강도 측정기 (Instron 8848, $Instron^{(R)}$ Co., Norwood, USA)를 이용하여 미세 인장결합강도를 측정하였다. 측정이 끝난 시편은 파절면을 stereomicroscope (MZ6, Leica Microsystems GmbH, Wetzlar, Germany) 로 30배 확대 관찰하여 파절의 종류를 구분하였다. 결과: 지르코니아 코어와 비니어링 세라믹 간의 평균 미세 인장결합강도는 절단만 시행한 그룹은 $28.8{\pm}7.0\;MPa$, 절단 후 트리밍을 한 그룹은 $11.0{\pm}33\;MPa$로 절단후 트리밍을 한 시편이 유의성 있게 결합강도가 낮아진 것으로 나타났다 (P=.00). 결론: 미세 인장결합강도 측정을 위한 시편 제작 시 가능한 한 스트레스를 가하지 않고 미세 시편을 제작하는 것이 중요하다고 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.