• 한국인터넷방송통신학회논문지
• /
• 제16권6호
• /
• pp.141-146
• /
• 2016

굴착 현장 인접 구조물의 안정성을 확보하기 위해 현장 주변 지반의 변형을 모니터링하는 것은 중요하다. 지반특성과 굴착 깊이에 따라 굴착 중 벽체의 변형이 다르게 발생하며, 이를 정확하게 예측하는 것은 불가능하다. 따라서 굴착지지 벽체 후방에 인클리노미터를 탑재한 센서를 설치하여 이를 모니터링한다. 본 논문에서는 굴착과정에서 벽체의 변형을 모니터링하기 위해 무선 센서 노드를 사용한 모니터링 시스템을 설계하였다. 또한 배터리 기반의 센서 노드의 수명을 연장하기 위해 굴착 진행 과정과 인클리노미터의 계측 값에 따라 위험도 등급을 설정하고 해당 등급에 따라 활성/휴면 구간을 적응적으로 변경하는 기법을 제안하였다. 지연시간 분석을 통해 제안기법은 굴착현장과 같이 위험도가 다른 데이터가 동적으로 발생하는 환경에서 고정 듀티사이클링 기법에 비해 지연시간을 크게 줄일 수 있음을 확인한다.

• Journal of applied mathematics & informatics
• /
• 제5권3호
• /
• pp.597-606
• /
• 1998

In the present study we consider a mathematical model of a non-interactive type autotroph-herbivore system in which the amount of autotroph biomass consumed by the herbivore is assumed to follow a Holling type II functional response. We have also incorpo-rated discrete time delays in the numerical response term to represent a delay due to gestation and in the recycling term which represent a delay due to gestation and in the recycling term which represents the time required for bacterial decomposition. We have derived con-dition for global asymptotic stability of the model in the absence of delays. Conditions for delay-induced asymptotic stability of the steady state are also derived. The length of the delay preserving stability has been estimated and interpreted ecologically.

• 한국유기농업학회지
• /
• 제24권4호
• /
• pp.665-680
• /
• 2016

Theoretically, it is said that economies of scope can be realized in the cropelivestock cycling organic farming. Thus, it is also used as the principle of organic farming. However, it is difficult to find the cases of the empirical analysis of it in Korea. In that sense, this study is meaningful in that it analyzed the agricultural data of case farms of obtaining the approval of both organic agricultural products and organic animal products and practicing cycling farming for 4 years and tested the hypothesis. This study measured economies of scope by using the actual measurement value and estimation value farming performance statistics for 4 years of case farms. This farmhouse conducted nutrient cycling in the farm like self-manufacturing and injecting organic agricultural byproduct and wild grass as organic livestock feed and fermenting organic livestock manure to organic compost to return it 100%. The results can be summarized as follows: According to the result of cycling farming of combining and producing organic agriculture and organic livestock, economies of scope were found to be realized in this case farmhouse. That is, although not strong, EOS>0, there were economies of scope. The measurement value appeared as 0.0722, 0.00378, 0.04667 and 0.13127 in 2012, 2013, 2014 and 2015, respectively. It was improved as time passes and the scale gets smaller. Therefore, in order to further improve economies of scope, there should be measures of reducing duplication costs between agriculture-livestock as low as possible and lowering the production cost of organic feed. That is, there is a need for the management strategy to adjust the import function and cost function according to the change in management paradigm and cropping system.

• 한국유기농업학회지
• /
• 제26권1호
• /
• pp.57-72
• /
• 2018

Organic agriculture seeks sustainable agriculture. Organic agriculture is based on circulating agriculture of a family farm unit. However, as of the end of 2016, only 33 out of the total organic farming farms were implementing Crop-Livestock cycling organic farming. The reason seems to be a matter of income after all. The optimal size combination refers to the scale by which family farms can maintain their quality of life while engaging in farming activities. In other words. it is a farm scale that maintains optimal income through stable labor costs. In the meantime, there has been no previous study on the optimal economical combination of Crop-Livestock cycling farming. Choi (2016) analyzed whether the economies of scope (EOS) were realized in the combined production by using the management data of the farmers who practiced Crop-Livestock cycling organic farming for four years. As a result, it has been revealed that the EOS measurement value is 0 or more so the economies of scope are being realized. Therefore, the purpose of this empirical analysis is to identify farm incomes under this circumstance. It is assumed that the optimum production is achieved by balancing the total income curve and the total cost curve in the optimal scale production range. The results of the analysis are as follows. First, the income after the conversion to Crop-Livestock cycling farming was 44,789,280 won, the sum of the seedling-livestock sector, which was 17,873,120 won higher when the non-Crop-Livestock cycling farming was assumed. The same is true for 2014 and 2015. The reason for this is that pig droppings were composted from organic seedlings, and the cost of selling pork was 150,000 won/per pig more expensive even though the manufacturing cost of organic feeds was higher than the purchasing cost. Secondly, this study simulated the result that the economic index varies when the farm size combination is changed by the farm size of 100% standard (S100) as of 2014. S130 is the increase in size from 100% of 2014, whereas S30 is the result of 3ha crop and 66 livestock (pigs). As a result of this simulation, Crop-Livestock cycling farming income decreased more than non-Crop-Livestock cycling farming as the farm size decreased, whereas the income decreased as the farm size increased. When the size was reduced below S50, the income tended to decrease. In this situation, EOS changed in the same direction. The results showed that when the farming size was reorganized and reduced to 50% compared to 2014, the income and income difference was the highest. At the same time, economies of scope (EOS) were the highest at 0.12985. In other words, it was found that the income of farm houses in a family farm unit sector was the best in the combination of 1.5ha crop agriculture and 110 livestock (pigs).

• 한국재료학회지
• /
• 제22권1호
• /
• pp.1-7
• /
• 2012

Thin film electrode consisting purely of porous anodic tin oxide with well-defined nano-channeled structure was fabricated for the first time and its electrochemical properties were investigated for application to an anode in a rechargeable lithium battery. To prepare the thin film electrode, first, a bi-layer of porous anodic tin oxides with well-defined nano-channels and discrete nano-channels with lots of lateral micro-cracks was prepared by pulsed and continuous anodization processes, respectively. Subsequent to the Cu coating on the layer, well-defined nano-channeled tin oxide was mechanically separated from the specimen, leading to an electrode comprised of porous tin oxide and a Cu current collector. The porous tin oxide nearly maintained its initial nano-structured character in spite of there being a series of fabrication steps. The resulting tin oxide film electrode reacted reversibly with lithium as an anode in a rechargeable lithium battery. Moreover, the tin oxide showed far more enhanced cycling stability than that of powders obtained from anodic tin oxides, strongly indicating that this thin film electrode is mechanically more stable against cycling-induced internal stress. In spite of the enhanced cycling stability, however, the reduction in the initial irreversible capacity and additional improvement of cycling stability are still needed to allow for practical use.

• 한국세라믹학회지
• /
• 제28권9호
• /
• pp.712-720
• /
• 1991

The effect of cyclic compressive stress on fracture responses of Al2O3 was investigated under uniaxial stress cycling. Experimental data were obtained for Al2O3 tension specimens under uniaxial tension-unloading and tension-compression cyclic loading conditions. To investigate the effect of compressive stress on the crack growth, theoretical results from the crack growth rate were compared with measured stress vs. failure relations. At low stress level in tension-compression cycling, residual tensile strains were also observed about failure time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.153.1-153
• /
• 2001

This paper describes a development of rehabilitation training system for the postural balance control. A new rehabilitation training system, designated as a virtual cycling system, was developed to improve postural balance control by combining virtual reality technology with an unfixed bicycle. In this experiment, 20 normal adults were tested to investigate the influencing parameters of postural balance control. In order to evaluate the usefulness and the training effects of the system, several parameters Including path deviation, cycling velocity, cycling time, center of pressure, and head movement were evaluated and analyzed quantitatively. Also, to improve the effect of balance training, the visual feedback information related to the subject´s weight shift was ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.181.6-181
• /
• 2001

This paper describes a development of rehabilitation training system for the postural balance control. A new rehabilitation training system, designated as a virtual cycling system, was developed to improve postural balance control by combining virtual reality technology with an unfixed bicycle. In this experiment, 20 normal adults were tested to investigate the influencing parameters of postural balance control. In order to evaluate the usefulness and the training effects of the system, several parameters including path deviation, cycling velocity, cycling time, center of pressure, and head movement were evaluated and analyzed quantitatively. Also, to improve the effect of balance training, the visual feedback information related to the subject's weight shift was assessed to identify whether it was useful. It could be also known ...

• Environmental Analysis Health and Toxicology
• /
• 제21권3호
• /
• pp.255-266
• /
• 2006

Soil organic matter (OM) is well documented for its capacity to retain persistent organic pollutants (POPs) and thus is important in dictating the environmental partitioning of POPs between media such as air, water, and soil. Black carbon (BC) is a small component of OM and exhibitt a 10$\sim$100 times greater sorption capacity of POPs than humified OM. Furthermore, due to the inherent long environmental life time of BC, a result of its resistance to physical and biological degradation, POPs can continue to accumulate in BC over a long period of time. The unique properties of BC have been of particular interest over the last 30 years and have resulted in broad research being conducted into its effects of POP cycling in atmospheric, oceanographic and soil matrices. The results of such studies have proved valuable In providing new research initiatives into the role of BC in the cycling of hydrophobic organic compounds (HOCs) as well as giving further insight into the long range atmospheric transport (LRAT) potential and subsequent risk assessment criteria for persistent organic pollutants (POPs). In this report, we introduce a novel study examining the relationships between BC and OM with respect to their POP sorption capacity and discuss the role of BC in influencing the environmental regulation of organic pollutants.

• Journal of Communications and Networks
• /
• 제18권2호
• /
• pp.201-209
• /
• 2016

In wireless sensor networks (WSNs) duty cycling has been an imperative choice to reduce idle listening but it introduces sleep delay. Thus, the conventional WSN medium access control protocols are bound by the energy-latency tradeoff. To break through the tradeoff, we propose a radio wave sensor called radio frequency (RF) wakeup sensor that is dedicated to sense the presence of a RF signal. The distinctive feature of our design is that the RF wakeup sensor can provide the same sensitivity but with two orders of magnitude less energy than the underlying RF module. With RF wakeup sensor a sensor node no longer requires duty cycling. Instead, it can maintain a sleep state until its RF wakeup sensor detects a communication signal. According to our analysis, the response time of the RF wakeup sensor is much shorter than the minimum transmission time of a typical communication module. Therefore, we apply duty cycling to the RF wakeup sensor to further reduce the energy consumption without performance degradation. We evaluate the circuital characteristics of our RF wakeup sensor design by using Advanced Design System 2009 simulator. The results show that RF wakeup sensor allows a sensor node to completely turn off their communication module by performing the around-the-clock carrier sensing while it consumes only 0.07% energy of an idle communication module.