• Clinical and Experimental Reproductive Medicine
• /
• v.16 no.1
• /
• pp.81-91
• /
• 1989

It has been suggested that the prognosis for fertility of the infertile patients with healed pelvic tuberculosis is very poor. Total 60 patients(77 cycles) with previous history of pelvic tuberculosis who underwent IVF-ET from January 1988 to March 1989 at SNUH were classified into three groups according to the principal histopathological lesions : tuberculous endometritis group(N=20, 28 cycles), tuberculous salpingitis group(N=32, 37 cycles) and pelvic peritoneal tuberculosis group(N=8, 12 cycles). To evaluate the effects of previous pelvic tuberculous lesions on ovarian follicular growth and development in controlled ovarian hyperstimulation for IVF-ET and its final outcome, serum E2 levels on the day of hCG administration(Day 0) and the day after hCG administration(Day +1), the number of ovarian follicles with mean diamete ${\geqq}$ 12 mm on Day 0, the number of oocytes retrieved by transvaginal aspiration, and pregnancy rate per cycle were measured and compared with control group(N=123, 161 cycles). There were no significant differences in cancellation rate during controlled ovarian hyperstimulation, total dosage of FSH and hMG administrated, menstrual cycle date(MCD) of hCG injection, serum E2 levels, the number of ovarian follicles with mean diameter ${\geqq}$ 15 mm, and the number of oocytes retrieved between pelvic tuberculosis group and control group. But in pelvic tuberculosis group, the number of ovarian follicles with mean diameter 12-14 mm, total number of ovarian follicles(${\geqq}$ 12 mm), and pregnancy rate per cycle were significantly decreased. These data suggest that previous pelvic tuberculous lesions have no significant adverse effects on the ovarian response to gonadotropin stimulation. IVF-ET proved to be an useful treatment modality for infertile patients with previous history of pelvic tuberculosis in spite of its relatively lowered pregnancy rate.

• Asian Journal of Turfgrass Science
• /
• v.10 no.2
• /
• pp.105-115
• /
• 1996

To find out the mineral cycles of calcium, magnesium and sodium in dynamic grassland cosystems in a steady state condition, this investigation was conducted along the northwest side on Mt. Kwanak. The experimental results may he suromarized on the communities of a Zoysia japonica and a Miscanthus sinesis as follows. As compared with some properties of the surface soils among two semi-natural grasslands, cal- cium (Ca) was greater quantity in a Zoysia japonica, whereas, in a Miscanthus sicensis, sodium (Na)and magnesium (Mg) were greater in Mt. Kwanak. For the case of steady production and release, the ratio of annual mineral production to the amount accumulated on the top of mineral soil in a steady state provides the estimates of release constant k. The release constants of Ca, Mg and Na of the litter were 0.42, 0.25 and 0.29 in the Zoysia japonica grassland, and were 0.41, 0.54 arid 0.62 in the Miscanthus sinensis grassland, respect- ively. The half times of Ca, Mg and Na required for the release or accumulation of the litter on the grassland were 1.65, 2.77 and 2.39 in the Zoysia japonica, and were 1.69, 1.28 and 1.12 in the Miscauthus sinensis, respectively. The increasing order of the turnover parameters of the elements was Ca, Na and Mg in the Zoysia japonica grassland, and was Na, Mg and Ca in the Miscanthus Si nens is grassland. The amounts of annual cycles for Ca, Mg, Na in the grassland ecosystem under the steady-state conditions were 1.29, 0.20 and 0.12 g /m$^2$ in the Zoysia japonica grassland and 3.91, 1.04 and 0.61 g /m$^2$ in the Miscanthus sinensis grassland.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.8
• /
• pp.1113-1116
• /
• 2009

The objective of this study was to compare the follicular population during spontaneous and $PGF_2{\alpha}$ induced oestrous cycles in Nili-Ravi buffaloes. In Exp.1, (n = 13 oestrous cycles) follicular population was monitored using ultrasonography on alternate days. Buffaloes were monitored for ovarian follicles from day 0 (first oestrus) until next oestrus. These animals were observed for oestrus twice daily using a teaser bull. Of 12 oestrous cycles, 9 (75%) had two waves of follicular activity and only 3 (25%) had three waves during the oestrous cycle. The mean number of small, medium and large follicles among various days of the oestrous cycle between two and three waves of follicular development were not significantly different (p>0.05). In Exp. 2, follicular population 3 days before oestrus was compared in buffaloes undergoing spontaneous (n = 12 oestrous cycles) and $PGF_2{\alpha}$ induced (n = 6) luteolysis. The mean number of small and large follicles increased (p<0.05) and the number of medium follicles decreased (p<0.05) during the 3 days before oestrus in buffaloes undergoing induced luteolysis as compared to those with spontaneous luteolysis. These results showed that the mean number of small, medium and large follicles among various days of the oestrous cycle were similar between the two and three waves of follicular development, and three days before oestrous the number of small, medium and large follicles altered due to induced luteolysis on day 9, compared to those with spontaneous luteolysis.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.5
• /
• pp.11-19
• /
• 2015

In this paper, EP-Kalina cycle applying liquid-vapor ejector and motive pump is newly proposed. In this EP-Kalina cycle, the liquid-vapor ejector is used to increase pressure difference between inlet and outlet of the turbine. Also the motive pump enhances the performance of liquid-vapor ejector, resulting in increase of system efficiency of OTEC cycles. The comparison cycles in this study are basic, Kalina, EKalina and EP-Kalina ones. The pump work, net power, APRe, APRc, TPP and system efficiency of each cycle are compared. In case of net power, EP-Kalina cycle is lowest among the cycles due to the application of the motive pump. But, the net power difference of cycles seems to be minor since the pump work of cycles is merely about 1kW, compared to turbine gross power of 20kW. The system efficiency of EP-Kalina cycle shows 3.22%, relatively 44% higher than that of basic OTEC cycle. Therefore, the system efficiency is increased by applying the liquid-vapor ejector and the motive pump. Additional performance analysis is necessary to optimize the proposed EP-Kalina cycle.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.192-198
• /
• 2000

Three dimensional thermal cycle analysis of the plunger is carried out in repeated forming process of the TV glass, which is continued work of two dimensional analysis where an efficient method has been proposed. The plunger undergoes temperature fluctuation during a cycle due to the repeated contact and separation from the glass, which attains a cyclic steady state having same temperature history at every cycle. Straightforward analysis of this problem brings about more than 90 cycles to get reasonable solution. An exponential function fitting method is proposed, which finds exponential function to best approximate temperature values of 3 consecutive cycles, and new cycle is restarted with the fitted value at infinite time. Number of cases are analyzed using the proposed method and compared to the result of straightforward repetition, from which one finds that the method always reaches nearly convergent solution within $9{\sim}12$ cycles, but turns around afterwards without further convergence. Two step use is found most efficient, in which the exponential fitting is carried out fer the first 12 cycles, followed by simple repetition, which shows fast convergence expending only 6 additional cycles to get the accuracy within 2 error. This reduces the computation cycle remarkably from 90 to 18, which is 80% reduction. From the parametric studies, one reveals that the overall thermal behavior of the plunger in terms of cooling parameters and time is similar to that of 2 dimensional analysis.

• Clinical and Experimental Reproductive Medicine
• /
• v.42 no.4
• /
• pp.175-180
• /
• 2015

Objective: Embryo loading (EL) is a major step in embryo transfer (ET) and affect on the success of in vitro fertilization (IVF). This study aimed to compare the effect of two different EL techniques on the rates of pregnancy and delivery in IVF/ET cycles. Methods: 207 fresh ET and 194 Frozen-thawed ET (FET) cycles were included in this retrospective study. Two groups (A and B) were defined based on the EL technique used. In group A, the entire catheter was flushed with Ham's F-10 medium. The embryos were then drawn into the catheter using one air bracket. In group B, $70{\mu}L$ of air was aspirated into the syringe and the catheter was flushed using Ham's F10 medium. The medium, air, embryos, air, and finally another layer of medium were then sequentially drawn into the catheter. The main outcome measures were the pregnancy and delivery rates. Results: The groups did not differ with respect to the etiology of infertility, the source of spermatozoa, the quality of the embryos, the type of EL catheter, and the ease of transfer. The pregnancy rate was similar between two groups. In fresh ET cycles, a higher delivery rate was observed in group B than it group A (78.1% vs. 60%, p=0.1). In FET cycles, the rate of delivery was significantly higher in group B than in group A to a nonsignificant extent (88.9% vs. 58.8%, p=0.06). Conclusion: EL techniques did not have a significant impact on the delivery rate in either fresh or FET cycles.

• Smart Structures and Systems
• /
• v.19 no.3
• /
• pp.335-340
• /
• 2017

Fiber Bragg grating (FBG) sensors are applied to structural health monitoring (SHM) in many areas due to their unique advantages such as ease of multiplexing and capability of absolute measurement. However, they are exposed to cyclic thermal load, generally in the temperature range of $-20^{\circ}C$ to $60^{\circ}C$, in railways during a long-term SHM and the cyclic thermal load can affect the mechanical strength of FBGs. In this paper, the effects of both cyclic thermal load and the reflectivity of FBGs on the mechanical strength are investigated though tension tests of FBG specimens after they are aged in a thermal chamber with temperature changes in a range from $-20^{\circ}C$ to $60^{\circ}C$ for 300 cycles. Results from tension tests reveal that the mechanical strength of FBGs decreases about 8% as the thermal cycle increases to 100 cycles; the mechanical strength then remains steady until 300 cycles. Otherwise, the mechanical strength of FBGs with reflectivity of 6dB (70%) and 10dB (90%) exhibits degradation values of about 6% and 12%, respectively, compared to that with reflectivity of 3dB (50%) at 300 cycles. SEM photos of the Bragg grating parts also show defects that cause their strength degradation. Consequently, it should be considered that mechanical strength of FBGs can be degraded by both thermal cycles and the reflectivity if the FBGs are exposed to repetitive thermal load during a long-term SHM.

• Korean Journal of Materials Research
• /
• v.17 no.3
• /
• pp.152-159
• /
• 2007

When the electronics are tested with thermal shock for Pb-free solder joint reliability, there are temperature conditions with use environment but number of cycles for test don't clearly exist. To obtain the long term reliability data, electronic companies have spent the cost and times. Therefore this studies show the test method and number of thermal shock cycles for evaluating the solder joint reliability of electronic components and also research bonding strength variation with formation and growth of intermetallic compounds (IMC). SMD (surface mount device) 3216 chip resistor and 44 pin QFP (quad flat package) was utilized for experiments and each components were soldered with Sn-40Pb and Sn-3.0 Ag-0.5 Cu solder on the FR-4 PCB(printed circuit board) using by reflow soldering process. To reliability evaluation, thermal shock test was conducted between $-40^{\circ}C\;and\;+125^{\circ}C$ for 2,000 cycles, 10 minute dwell time, respectively. Also we analyzed the IMCs of solder joint using by SEM and EDX. To compare with bonding strength, resistor and QFP were tested shear strength and $45^{\circ}$ lead pull strength, respectively. From these results, optimized number of cycles was proposed with variation of bonding strength under thermal shock.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.2
• /
• pp.102-110
• /
• 2009

The cost for maintenance of bridge structures such as repair or reinforcement is increasing. In addition, the efforts for inspection of bridge structures is becoming more important since the proper repair or reinforcement should be performed to save the maintenance cost and ensure the safety for public infrastructure. Therefore, it is studied on this paper to estimate the repair or reinforcement cycles using probabilistic approach for the steel-box girders of bridge superstructure. In addition, a computer simulation program is uniquely developed based on probabilistic approach to calculate the cycles derived from the function of age of bridge and performance rating curve which were previously studied. In order to ensure the reliability of results and appropriateness of the model, statistical analyses were performed. Also, the results were compared and proved to be similar with ones from previous statistical data related to the repair or reinforcement cycles. The results from this study is expected to be useful for the determination of proper time to repair or reinforce the bridge structure and raise the safetyness of bridge structure in advance.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.197-203
• /
• 2020

PURPOSE. The aim of this study was to evaluate the effect of multiple firings on the bond strength between yttriatetragonal zirconia polycrystals (Y-TZP) and 2 types of resin cements. MATERIALS AND METHODS. Sixty 3Y-TZP specimens (LAVA Frame Multi) were divided into 3 groups depending on the following firing procedures: (1) 2-firing cycles, (2) 5-firing cycles, (3) 10-firing cycles. Two samples from each group were investigated by using SEM to determine the morphological changes. All specimens were treated with 125 ㎛ airborne-particle abrasion and the surface roughness of each specimen was measured. The specimens from each firing group were then further divided into 2 subgroups (n = 9) to apply 2 types of resin cement (MDP-free resin cement: RelyX Unicem-RU, and MDP containing resin cement: Panavia F 2.0-PA). The shear bond strength (SBS) test was performed and failure types of all the debonded specimens were classified by using a stereomicroscope as adhesive, cohesive, and mixed. The statistical analysis of surface roughness and SBS data were performed by using 1-way ANOVA and 2-way ANOVA followed by Tukey-HSD tests (α=.05). Failure modes were calculated as a percentage for each group. RESULTS. The bond strength of RU and PA to the specimens obtained with 2 firings were not statistically different from each other (P=.1). However, the SBS values of PA were found to be significantly higher than RU for the specimens obtained with 5 and 10 firing cycles (P=.001 and P=.02, respectively). Surface roughness analysis revealed no statistical difference between groups (P=.2). The SEM analysis of samples fired 5- and 10- times showed irregularities and boundary loss in zirconia grains, and empty spaces between zirconia grains. CONCLUSION. The bond strength of PA cement was higher than that of RU to the zirconia subjected to repeated firings (5 and 10 firing cycles). When zirconia is subjected to multiple firings, using MDP-containing resin cement can be recommended.