• Bulletin of the Society of Naval Architects of Korea
• /
• v.23 no.3
• /
• pp.17-26
• /
• 1986

A new relationship between total acoustic emission counts per cycle and crack growth rate is derived in terms of stress intensity factor to explain the acoustic emission behavior due to fatigue crack growth. The experimental results of the total acoustic emission counts per cycle obtained from aluminium 5,000 series alloy specimens are compared with the theoretical values. Both experimental and theoretical total acoustic emission counts per cycle result in the linear relationship to the crack length.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1156-1167
• /
• 2010

The constant rate of strain (CRS) consolidation test has been widely used to evaluate consolidation characteristics of soils instead of the standard Incremental Loading Test. In practical problems, after the ground improvement, the condition of the soil is over-consolidated. Therefore, it is important to determine the recompression indices and the coefficient of consolidation(or the coefficient of swelling) of unloading-reloading cycle to predict the settlement behavior. However, since standard testing procedures or studies related with strain rate are insufficient especially in unloading-reloading cycle, it is difficult to predict the settlement field behavior accurately from the CRS consolidation test results in spite of its lots of strengths. The several CRS consolidation tests were performed changing the unloading strain rate from 0.2%/hr to 20%/hr with vertical drainage condition using the reconstituted kaolinite sample. For the reconstituted kaolinite sample in CRS consolidation test, the recompression indices are insensitive to the strain rate. It is revealed that the coefficient of consolidation of reloading is affected by the developed pore pressure during unloading. Additionally, the test should be conducted in the positive pore pressure ratio range (3~15%) to obtain the reasonable coefficient of consolidation in the whole range(loading, unloading and reloading).

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.1063-1070
• /
• 2017

This paper presents a method for forecasting future uranium prices that is used as input data to calculate the uranium cost, which is a rational key cost driver of the nuclear fuel cycle cost. In other words, the statistical autoregressive integrated moving average (ARIMA) model and existing engineering cost estimation method, the so-called escalation rate model, were subjected to a comparative analysis. When the uranium price was forecasted in 2015, the margin of error of the ARIMA model forecasting was calculated and found to be 5.4%, whereas the escalation rate model was found to have a margin of error of 7.32%. Thus, it was verified that the ARIMA model is more suitable than the escalation rate model at decreasing uncertainty in nuclear fuel cycle cost calculation.

• Journal of Oral Medicine and Pain
• /
• v.26 no.1
• /
• pp.17-25
• /
• 2001

The purpose of this study is to evaluate the relationship of menstrual cycle and halitosis by measuring the concentrations of Voltile Sulfur Compounds, secretion rate of unstimulated saliva, secretion rate of stimulated saliva and viscosity of saliva during the menstrual cycle. The subjects were 19 female dental students of Yonsei University who had relatively good alignment of the teeth. They hadn't taken antibiotics or oral contraceptive pills during the few months prior to the experiment, and they didn't have any dental caries involving the pulp or periodontal disease. Lady-$Q^{(R)}$(Alpain Korea, Korea), which confirms the ovulation using saliva, was used to find out the menstrual cycle of subjects. Their history was taken and their basal body temperature was measured. On the basis of these data, the amount of Volatile Sulfur Compounds, secretion rate of unstimulated saliva, secretion rate of stimulated saliva, viscosity of saliva were measured during 1 day of the proliferative phase, 3 days of ovulatory phase and 1 day of the luteal phase within the menstrual cycle. The results were as follows : 1. The amount of Volatile Sulfur Compounds, secretion rate of unstimulated saliva, secretion rate of stimulated saliva, and viscosity of saliva showed no statistically significant cyclic change during proliferative phase, ovulatory phase, and luteal phase(p<0.05). 2. Between the secretion rate of unstimulated saliva and secretion rate of stimulated saliva, there was significant correlation during proliferative phase and luteal phase(p<0.05) and there was no significant correlation during ovulatory phase but relatively close result was seen. 3. The amount of Volatile Sulfur Compounds during proliferative phase and luteal phase had statistically significant correlation(p<0.05). 4. Secretion rate of stimulated saliva during proliferative phase and ovulatory phase, proliferative phase and luteal phase, ovulatory phase and luteal phase had significant correlations (p<0.01).

• Journal of Korean Society for Quality Management
• /
• v.48 no.1
• /
• pp.201-214
• /
• 2020

Purpose: The purpose of this paper is to determine an optimal number of cycle times for the replacement under the circumstance where the system is replaced at the periodic time and the multiple number of working cycles whichever occurs first and the system is minimally repaired between the replacements if it fails. Methods: The system is replaced at periodic time () or cycle time, whichever occurs first, and is repaired minimally when it fails between successive replacements. To determine the optimal number of cycle times, the expected total cost rate is optimized with respect to the number of cycle times, where the expected total cost rate is defined as the ratio of the expected total cost between replacements to the expected time between replacements. Results: In this paper, we conduct a sensitivity analysis to find the following results. First, when the expected number of failures per unit time increases, the optimal number of cycle times decreases. Second, when the periodic time for replacement becomes longer, the optimal number of cycle times decreases. Third, when the expected value for exponential distribution of the cycle time increases, the optimal number of cycle times increases. Conclusion: A mathematical model is suggested to find the optimal number of cycle times and numerical examples are provided through the sensitivity analysis on the model parameters to see the patterns for changes of the optimal number of cycle times.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1721-1726
• /
• 2004

Heat rate is a representative index to estimate the performance of turbine cycle in nuclear power plant. Accuracy of heat rate calculation is dependent on the accuracy of measurement for plant status variables. Uncertainty of heat rate can be modeled using uncertainty propagation model. We developed practical estimation model of heat rate uncertainty using the propagation and regression model. The uncertainty model is used in the performance analysis system developed for the operating nuclear power plant.

• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.3-15
• /
• 1993

A multi-cylinder four cycle spark ignition engine equipped with on exhaust gas recirculation(EGR) system to reduce nitric oxide emission and to improve fuel consumption rate has been comprehensively simulated In a computer program including intake and exhaust manifolds. To achieve these goals, this program was tested against experiments performed on a standard production four cylinder four cycle gasoline engine with EGR system. As EGR rate Increased, the maximum temperature of combustion chamber and NO omission concentration decreased under each driving condition. But the emission concentration of CO didn't change much through whole district in spite of the increase of EGR rate. Fuel consumption rate improved under each driving condition according to the increased of EGR rate until 10 percent EGR rate. Therefore the degree of EGR depend not only on the NO emission but also on the economy and the engine performance criteria of the engine.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.2
• /
• pp.217-223
• /
• 1997

This study was performed to determine if women with day 3 serum inhibin-B concentrations <45pg/ml (conversion factor to SI unit, 1.00) demonstrate a poor response to ovulation induction and assisted reproductive technology outcome to women with inhibin-B${\ge}45pg$/ml, independant of day 3 FSH, E2 and patient age. From Jan 1996 to Dec 1996, 16 volunteers patients who underwent 25 IVF cycles with luteal phase GnRH agonist suppression and HMG stimulation were allocated to the study group. We evaluated day 3 serum inhibin-B, FSH, E2, peak E2, cancellation rate per initiated cycle (%) and clinical pregnancy rate per initiated cycle (%) according to the above two groups and independent of patient age, day 3 FSH, day 3 E2 and all of above combined. Women with day 3 serum inhibin-B${\ge}45pg$/ml demonstrated higher average day 3 inhibin-B level, clinical pregnancy rate per initiated cycle ($20.3{\pm}2.5$ pg/ml vs $80.9{\pm}5.0$ pg/ml, p<0.05; 24.8% vs 8.5%, p<0.05) and lower day 3 FSH level, cancellation rate per initiated cycle ($6.9{\pm}0.3$ mIU/ml vs $8.5{\pm}0.5$ mIU/ml, p<0.05; 1.5% vs 9.0%, p<0.05). Women with day 3 serum inhibin${\ge}45pg$/ml and age<40 year demonstrated higher pregnancy rate per initiated cycle (28.2% vs 7.4%, p<0.05) and lows. day 3 FSH level, cancellation rate per initiated cycle ($6.9{\pm}0.5$ mIU/ml vs $8.2{\pm}0.7$ mIU/ml, p<0.05; 1.0% vs 9.0%, p<0.05). Women with day 3 serum inhibin${\ge}45pg$/ml and day 3 FSH<15mIU/ml demonstrated higher pregnancy rate per initiated cycle (33.5% vs 9.5%, p<0.05) and lower day 3 FSH level, cancellation rate per initiated cycle ($7.7{\pm}0.2$ mIU/ml vs $8.5{\pm}0.5$ mIU/ml, p<0.05; 1.5% vs 10.0%, p<0.05). Women with day 3 serum inhibin${\ge}45pg$/ml and day 3 E2<50pg/ml demonstrated higher pregnancy rate per initiated cycle (30.0% vs 9.5%, p<0.05) and lower cancellation rate per initiated cycle (1.5% vs 9.5%, p<0.05). Women with day 3 serum inhibin${\ge}45pg$/ml, age<40 year, day 3 FSH<15mIU/ml and day 3 E2<50pg/ml demonstrated higher pregnancy rate per initiated cycle (30.0% vs 10.8%, p<0.05) and lower day 3 FSH level, cancellation rate per initiated cycle ($6.8{\pm}0.6$ mIU/ml vs $8.4{\pm}0.9$ mIU/ml, p<0.05; 1.5% vs 7.8%, p<0.05). Therefore women with low day 3 serum inhibin-B concentrations demonstrate a poorer response to ovulation induction and are less likely to conceive a clinical pregnancy though ART relative to women with high day 3 inhibin-B and day 3 serum inhibin-B, in addition to a day 3 FSH, E2 and patient age, appears helpful in prediction in IVF-ET outcome.

• Journal of Korea Trade
• /
• v.26 no.2
• /
• pp.21-44
• /
• 2022

Purpose - This study quantifies sources of trade balance dynamics over the business cycle in Korea. Specifically, we quantify the relative importance of domestic and foreign factors on trade balance dynamics using a small open economy real business cycle (SOE-RBC) model and provide policy implications for stabilization policies. Aggregate productivity and interest rate spreads are considered domestic factors affecting the trade balance. A world interest rate (the U.S. interest rate) is considered a foreign factor. Design/methodology - Following Neumeyer and Perri (2005), we build the SOE-RBC model with three types of shocks: aggregate productivity, interest rate spread, and world interest shocks. The model is estimated by the generalized method of moments (GMM) using relevant business cycle statistics. The estimated model is used for quantifying the relative importance of domestic and foreign factors on trade balance dynamics in Korea. Findings - Our main findings can be summarized as follows: 85.64% of the trade balance fluctuations in Korea are explained by domestic factors, the remaining 14.35% by foreign factors. Particularly, trade balance dynamics are mostly accounted for by the change in aggregate productivity shocks (85.58%). World interest rate shocks considerably explain trade balance (14.35%), whereas the role of interest rate spread shocks that represent domestic risks is limited (0.08%). Although aggregate productivity is key in explaining trade balance dynamics in Korea, interest rates still have an essential role. This is because aggregate productivity changes induce interest rate spread variations and, thus, the trade balance significantly. The results suggest that government policies mitigating fluctuations in aggregate productivity would be effective for stabilization policies in Korea by reducing the trade balance volatility. Originality/value - Existing studies on the emerging market business cycle examine mostly Latin American countries, and the main object of the studies is the volatility of consumption rather than trade balance dynamics. Conversely, our study examines Korea rather than Latin American countries. Additionally, we examine sources of trade balance dynamics, which are relatively more important in Korea, rather than those of the volatility of consumption. Hence, we estimate the model to explicitly match moments related to trade balance in the data.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.2 s.257
• /
• pp.116-124
• /
• 2007

An adsorption chiller is expected to have high energy-efficiency in utilizing the waste heat exhausted from a process. The objective of this paper is to investigate the performance of silica gel-water adsorption chiller from the cycle simulation and to provide a guideline for design of the adsorption chiller. The effect of cycle time, inlet temperature and water flow rate on the cooling capacity and COP is quantified during the cycle operation. It is found that the performance of adsorption chiller is more sensitive to the change of inlet water temperature rather than the water flow rate. It is concluded that the COP is 0.57 in the standard conditions(hot water $80^{\circ}C$, cooling water $30^{\circ}C$, chilled water inlet temperatures $14^{\circ}C$ and cycle time 420sec).